Transdermal implants are a form of body modification used both in a medical and aesthetic context. In either case, they consist of an object placed partially below and partially above the skin, thus transdermal. The skin around it generally heals as if it were a piercing.
In the body piercing community, these types of modification are generally called fairly "heavy" due to the complexity of the procedure and the social implications. Two types of implants can be used.
When the procedure is done using a post-like implant, an incision is made a small distance from the site. The skin is then lifted and the implant is passed through. Then, a hole is opened at the site for it to pass through, and it is moved so that the top part fills the hole. The implants used for this are generally small and not textured in any way except rounding.
If a more graphic implant is desired, it is generally done in two parts. First, the base is inserted the same way a single-part would be, except that the base implant is threaded. It may either stick out like a bolt, or be inward like a nut. When this is done, the top half is screwed on. This type is usually done for spikes and/or horns.
In any case, the part of the implant which passes under the skin generally is somewhat large and has holes. The skin will grow into them, making it more permanent.
Microdermal implants are a form of body modification which gives the aesthetic appearance of a transdermal implant, without the complications of the much more complicated surgery associated with transdermal implants. Microdermals are single point piercings which are a sort of surface piercing.
Microdermal implants can be placed practically anywhere on the surface of the skin on the body, but are different from conventional piercings in that they are composed of two components: an anchor, which is implanted underneath the skin, with a step protruding from (or flush with) the surface of the surrounding skin, and the interchangeable jewellery, which is screwed into the threaded hole in the step of the anchor.
The procedure is usually performed using a dermal punch or needle. When a dermal piercing is done with a punch, the pouch is made in a different way. When using a needle, the pouch is made by separating the skin. When using a dermal punch, the pouch is made by removing a bit of tissue. A microdermal punch is less painful and therefore commonly used. The process starts by identifying the point of piercing on the sterilized area that will be marked with a surgical marker. The micro dermalpunch is then used to remove skin tissues. The anchor is then placed under the skin and a piece of jewelry is placed using surgical forceps.
Microdermal implants are a more desirable alternative to surface piercings, as they provide less scarring when removed. They are semi permanent and can be removed with the assistance of a professional. Implants should be left alone and covered for the first 3–6 months as they are susceptible to outside damage (tugging, pulling and catching, which move the implant closer to the surface of the skin). Also, the body naturally rejects foreign objects, so it is crucial for the piercings to go as deep as possible. In order to combat these effects constant modification to the jewelry is being made; the latest use large holes in the anchors to encourage tissue to grow through to hold the jewelry in place.