Hypophosphorous acid

Hypophosphorous acid[1]
Names
IUPAC name
Phosphinic acid
Other names
Hydroxy(oxo)-λ5-phosphane

Hydroxy-λ5-phosphanone
Oxo-λ5-phosphanol

Oxo-λ5-phosphinous acid
Identifiers
6303-21-5 YesY
57583-56-9 (2H3) YesY
3D model (Jmol) Interactive image
ChEBI CHEBI:29031 YesY
ChEMBL ChEMBL2105054 N
ChemSpider 10449263 YesY
10459437 (17O2) YesY
2342086 (2H3) YesY
ECHA InfoCard 100.026.001
KEGG D02334 YesY
PubChem 3085127 (2H3)
UN number UN 3264
Properties
H3PO2
Molar mass 66.00 g/mol
Appearance colorless, deliquescent crystals or oily liquid
Density 1.493 g/cm3[2]

1.22 g/cm3 (50 wt% aq. solution)

Melting point 26.5 °C (79.7 °F; 299.6 K)
Boiling point 130 °C (266 °F; 403 K) decomposes
miscible
Solubility very soluble in alcohol, ether
Acidity (pKa) 1.2
Structure
pseudo-tetrahedral
Hazards
Safety data sheet JT Baker
Flash point Non-flammable
Related compounds
Phosphorous acid
Phosphoric acid
Related compounds
Sodium hypophosphite
Barium hypophosphite
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Hypophosphorous acid is a phosphorus oxoacid and a powerful reducing agent with molecular formula H3PO2. Inorganic chemists refer to the free acid by this name (also as "HPA"), or the acceptable name of phosphinic acid. It is a colorless low-melting compound, which is soluble in water, dioxane, and alcohols. The formula for hypophosphorous acid is generally written H3PO2, but a more descriptive presentation is HOP(O)H2 which highlights its monoprotic character. Salts derived from this acid are called phosphinates (hypophosphites).

HOP(O)H2 exists in equilibrium with the minor tautomer HP(OH)2. Sometimes the minor tautomer is called hypophosphorous acid and the major tautomer is called phosphinic acid.

Preparation and availability

The acid is prepared industrially via a two step process. Hypophosphite salts of the alkali and alkaline earth metals result from treatment of white phosphorus with hot aqueous solution of the appropriate hydroxide, e.g. Ca(OH)2.

P4 + 3 OH + 3 H2O → 3 H
2
PO
2
+ PH3

The free acid may be prepared by the action of a strong acid on these hypophosphite salts.

H
2
PO
2
+ H+ → H3PO2

Alternatively, H3PO2 arises by the oxidation of phosphine with iodine in water.

PH3 + 2I2 + 2H2O → H3PO2 + 4I + 4H+

HPA is usually supplied as a 50% aqueous solution.

Uses

Its main industrial use is for electroless nickel plating (Ni–P), although it is primarily used as a salt (sodium hypophosphite).[3] In organic chemistry, H3PO2 can be used for the reduction of arenediazonium salts, converting ArN+
2
to Ar–H.[4][5][6] When diazotized in a concentrated solution of hypophosphorous acid, an amine substituent can be removed from arenes, selectively over alkyl amines. Owing to its ability to act as a mild reducing agent and oxygen scavenger it is sometimes used as an additive in Fischer esterification reactions, where it prevents the formation of colored impurities. Hypophosphorous acid is also used in the formulation of pharmaceuticals, discoloration of polymers, water treatment, retrieval of precious or non-ferrous metals.

DEA List I chemical status

Because hypophosphorous acid can reduce elemental iodine to form hydroiodic acid, which is a reagent effective for reducing ephedrine or pseudoephedrine to methamphetamine,[7] the United States Drug Enforcement Administration designated hypophosphorous acid (and its salts) as a List I precursor chemical effective November 16, 2001.[8] Accordingly, handlers of hypophosphorous acid or its salts in the United States are subject to stringent regulatory controls including registration, recordkeeping, reporting, and import/export requirements pursuant to the Controlled Substances Act and 21 CFR §§ 1309 and 1310.[8][9][10]

Organophosphinic acids

Organophosphinic acids have the formula R2PO2H. The two hydrogen atoms directly bound to phosphorus in phosphinic acid are replaced by organic groups. For example, formaldehyde and H3PO2 react to give (HOCH2)2PO2H. Similarly, phosphinic acid adds to Michael acceptors, for example with acrylamide it gives H(HO)P(O)CH2CH2C(O)NH2. The Cyanex family of dialkylphosphinic acids are used in hydrometallurgy to extract metals from ores.

Inorganic derivatives

Few metal complexes have been prepared from H3PO2, one example is Ni(O2PH2)2.

Sources

References

  1. Petrucci,, Ralph H. (2007). General Chemistry (9th ed.). p. 946.
  2. Pradyot Patnaik. Handbook of Inorganic Chemicals. McGraw-Hill, 2002, ISBN 0-07-049439-8
  3. Abrantes, L. M. (1994). "On the Mechanism of Electroless Ni–P Plating". Journal of The Electrochemical Society. 141 (9): 2356. doi:10.1149/1.2055125.
  4. William H. Brown; Brent L. Iverson; Eric Anslyn; Christopher S. Foote (2013). Organic Chemistry. Cengage Learning. p. 1003. ISBN 9781133952848.
  5. Robison, M. M.; Robison, B. L. "2,4,6-Tribromobenzoic acid". Org. Synth. 36: 94.; Coll. Vol., 4
  6. Kornblum, N. "3,3′-Dimethoxybiphenyl and 3,3′-dimethylbiphenyl". Org. Synth. 21: 30.; Coll. Vol., 3
  7. Gordon, P. E.; Fry, A. J.; Hicks, L. D. (23 August 2005). "Further studies on the reduction of benzylic alcohols by hypophosphorous acid/iodine" (PDF). ARKIVOC. 2005 (vi): 393–400. ISSN 1424-6376.
  8. 1 2 66 FR 52670—52675. 17 October 2001.
  9. 21 CFR 1309
  10. 21 USC, Chapter 13 (Controlled Substances Act)
This article is issued from Wikipedia - version of the 11/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.