SkyCube

SkyCube

SkyCube in undeployed state
Mission type Earth imaging
Operator Southern Stars
Mission duration 90 days planned
Spacecraft properties
Spacecraft type 1U CubeSat
Launch mass 1.3 kilograms (2.9 lb)
Start of mission
Launch date 9 January 2014, 18:07:05 (2014-01-09UTC18:07:05Z) UTC
Rocket Antares 120
Launch site MARS LP-0A
Contractor Orbital Sciences
Deployed from International Space Station
End of mission
Last contact 27 March 2014 (2014-03-28)
Decay date 8 November 2014
Orbital parameters
Reference system Geocentric
Regime Low Earth
Perigee 414 km (257 mi)
Apogee 419 km (260 mi)
Inclination 51.6 degrees
Epoch  

SkyCube was an American crowdsourced CubeSat. It was first announced on Kickstarter on 14 July 2012 and successfully funded on 12 September 2012, meeting its US$82,500 goal with a total of $116,890. It was developed and built in 2012–2013, completed flight integration at NanoRacks in late 2013,[1] and finally launched aboard the Cygnus CRS Orb-1 flight[2] at the Mid-Atlantic Regional Spaceport on Wallops Island, Virginia. SkyCube was deployed from the International Space Station on February 28, 2014. Contact with the satellite was last made on March 27, 2014. SkyCube re-entered the Earth's atmosphere on November 9, 2014.[3]

Mission

SkyCube has three major mission components: the broadcast of messages from its radio, the capture of pictures from space via its three cameras, and the deployment of a large balloon.

Messages

The SkyCube radio emits periodic beaconing pings which contain 120-byte messages from the Kickstarter backers. These pings are transmitted at 915 MHz, using the AX.25 protocol at 9600 baud with BPSK modulation, with a callsign of WG9XMF.[4]

Imaging

Using its three cameras, SkyCube will take pictures of the Earth from orbit. The cameras are VGA resolution and have lenses with three different fields of view (120°, 35°, and 6°), giving a variety of imaging possibilities. The images will be transmitted back to Earth at 57.6 kbit/s. Kickstarter backers will choose when the pictures are taken. NOAA granted a 90-day imaging license to SkyCube on 1 February 2013.[5]

Balloon

SkyCube will deploy a large (2 metres (6.6 ft)) balloon at the end of its mission. The balloon is coated with reflective titanium dioxide and will make it visible from the ground. The balloon will also increase the atmospheric drag on SkyCube, and within two weeks the orbit will decay enough that SkyCube will enter Earth's atmosphere and burn up safely. The inflation is triggered via 4-gram CO2 canister.

Technical specifications

Dimensions 100 × 100 × 113 mm CubeSat standard
Interface specification ISIPOD 1.4I
Mass 1.3 kilograms (2.9 lb)
Expected lifetime 60 – 90 days
Attitude control system Passive magnotorquers
Power 9 total panels: one roof panel and 8 deployable panels. Each panel consists of 24 Spectrolab triangular cells wired in series-parallel for a nominal 12 volts.
Batteries 2x Li-ion 18650 cells, 8.4V 2300 mAh, Molicell ICR18650J.
Power bus 3.3V, 5V regulated. Constant-current driver for solar panel deployment (Nichrome burn wires).
Primary downlink 915 MHz, AX.25 protocol, BPSK modulation, 57.6 kbit/s
Telemetry/messaging downlink 915 MHz, AX.25 protocol, BPSK modulation, 9.6 kbit/s
Command uplink 450 MHz, AX.25 protocol, FSK modulation, 9.6 kbit/s

Partnerships

SkyCube relies on several partners to provide necessary services:

Organization Function
Naval Postgraduate School Ground station services in North America and Hawaii[6]
Saber Astronautics Ground station and Mission Control services in Australia[7]
Orbital Sciences Launch provider
NanoRacks Integrator[1]
Astronautical Development, LLC Radios and structural components

In the media

See also

References

This article is issued from Wikipedia - version of the 9/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.