Orbiting Carbon Observatory 2

Orbiting Carbon Observatory 2

Artist depiction of OCO-2
Mission type Climatology
Operator NASA
COSPAR ID 2014-035A
SATCAT № 40059
Website oco.jpl.nasa.gov
Mission duration Planned: 2 years
Elapsed: 2 years, 5 months, 14 days
Spacecraft properties
Bus LEOStar-2
Manufacturer Orbital Sciences[1]
Launch mass 454 kg (1,001 lb)[1]
Dry mass 409 kg (902 lb)
Payload mass 131 kg (289 lb)[1]
Dimensions Stowed: 2.12 × 0.94 m (6.96 × 3.08 ft)[1]
Power 815 W[1]
Start of mission
Launch date 2 July 2014, 09:56:23 (2014-07-02UTC09:56:23) UTC
Rocket Delta II 7320-10C
Launch site Vandenberg SLC-2W
Contractor United Launch Alliance
Orbital parameters
Reference system Geocentric
Regime Sun-synchronous
Semi-major axis 7,080.59 km (4,399.67 mi)
Eccentricity 0.000191
Perigee 701.10 km (435.64 mi)
Apogee 703.81 km (437.33 mi)
Inclination 98.20°
Period 98.82 minutes
RAAN 202.67°
Argument of perigee 86.95°
Mean anomaly 273.19°
Mean motion 14.57 rev/day
Velocity 7.5 km/s (4.7 mi/s)
Epoch 19 September 2016, 10:55:06 UTC[2]
Revolution number 11,796
Main telescope
Type Near-IR Cassegrain (ƒ/1.8)[3]
Wavelengths 2.06 microns
1.61 microns
0.765 microns[1]
Instruments
3 grated spectrometers

Orbiting Carbon Observatory 2 (OCO-2) is an American environmental science satellite which launched on 2 July 2014. A NASA mission, it is a replacement for the Orbiting Carbon Observatory which was lost in a launch failure in 2009.

Mission overview

The OCO-2 satellite was built by Orbital Sciences Corporation, based around the LEOStar-2 bus.[4] The spacecraft is being used to study carbon dioxide concentrations and distributions in the atmosphere.[5]

OCO-2 was ordered after the original OCO spacecraft failed to achieve orbit. During the first satellite's launch atop a Taurus-XL in February 2009, the payload fairing failed to separate from around the spacecraft and the rocket did not have sufficient power to enter orbit with its additional mass. Although a Taurus launch was initially contracted for the reflight, the launch contract was cancelled after the same malfunction occurred on the launch of the Glory satellite two years later.[6]

Launch of OCO-2 on a Delta II rocket

United Launch Alliance launched OCO-2 using a Delta II rocket at the beginning of a 30-second launch window at 09:56 UTC (2:56 PDT) on 2 July 2014. Flying in the 7320-10C configuration, the rocket launched from Space Launch Complex 2W at Vandenberg Air Force Base.[7] The initial launch attempt on 1 July at 09:56:44 UTC was scrubbed at 46 seconds on the countdown clock due to a faulty valve on the water suppression system, used to flow water on the launch pad to dampen the acoustic energy during launch.[8]

OCO-2 joined the A-train satellite constellation, becoming the sixth satellite in the group. Members of the A-train fly very close together in sun-synchronous orbit, to make nearly simultaneous measurements of Earth. A particularly short launch window of 30 seconds was necessary to achieve a proper position in the train.[9] As of 19 September 2016 it was in an orbit with a perigee of 701.1 km (435.6 mi), an apogee of 703.8 km (437.3 mi) and a 98.2 degree inclination.[2]

The mission is expected to cost US$467.7 million, including design, development, launch and operations.[1]

Column CO2 measurements

Mollweide projected animation of CO2 data from the OCO-2 mission

OCO-2 makes measurements in three different spectral bands over four to eight different footprints of approximately 1.29 km × 2.25 km (0.80 mi × 1.40 mi) each.[10][11] About 24 soundings are collected per second while in sunlight and over 10% of these are sufficiently cloud free for further analysis. One spectral band is used for column measurements of oxygen (A-band 0.765 microns), and two are used for column measurements of carbon dioxide (weak band 1.61 microns, strong band 2.06 microns).[3]

In the retrieval algorithm measurements from the three bands are combined to yield column-averaged dry-air mole fractions of carbon dioxide. Because these are dry-air mole fractions, these measurements do not change with water content or surface pressure. Because the molecular oxygen content of the atmosphere (i.e. excluding the oxygen in water vapour) is well known to be 20.95%, oxygen is used as a measure of the total dry air column. To ensure these measurements are traceable to the World Meteorological Organization, OCO-2 measurements are carefully compared with measurements by the Total Carbon Column Observing Network (TCCON).[3]

References

  1. 1 2 3 4 5 6 7 "Orbiting Carbon Observatory-2 Launch" (PDF) (Press Kit). NASA. July 2014. Retrieved 16 May 2015.
  2. 1 2 Peat, Chris (19 September 2016). "OCO 2 - Orbit". Heavens-above.com. Retrieved 20 September 2016.
  3. 1 2 3 Osterman 2015, p. 7.
  4. ↑ Krebs, Gunter. "OCO 1, 2 (ESSP 5)". Gunter's Space Page.
  5. ↑ "Carbon dioxide-sniffing spacecraft set to launch". Spaceflight Now. 28 June 2014. Retrieved 1 July 2014.
  6. ↑ Graham, William (30 June 2014). "ULA Delta II launch with OCO-2 rescheduled for Wednesday". NASA Spaceflight. Retrieved 1 July 2014.
  7. ↑ "Delta II OCO-2 Mission" (PDF). United Launch Alliance. Retrieved 1 July 2014.
  8. ↑ "Launch of NASA's Orbiting Carbon Observatory-2 Rescheduled for July 2". NASA. 1 July 2014. Retrieved 1 July 2014.
  9. ↑ Murphy, Rosalie (27 June 2014). "Five Things About OCO-2". NASA. Retrieved 2 July 2014.
  10. ↑ Parkinson, Claire L.; Ward, Alan; King, Michael D., eds. (2006). "Orbiting Carbon Observatory" (PDF). Earth Science Reference Handbook. NASA. pp. 199–203. Retrieved 14 May 2015.
  11. ↑ Osterman 2015, p. 5.

Bibliography

Media related to Orbiting Carbon Observatory-2 at Wikimedia Commons

This article is issued from Wikipedia - version of the 11/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.