Tanzer 10

Tanzer 10
Development
Designer Richard Carter
Location Canada
Year 1980
Builder(s) Tanzer Industries
Boat
Crew Two
Draft 6.67 ft (2.03 m) swing keel down
Hull
Type Masthead sloop
Construction Fiberglass
LOA 32.67 ft (9.96 m)
LWL 27.50 ft (8.38 m)
Beam 11.86 ft (3.61 m)
Hull Appendages
Keel/Board Type fixed conventional fin keel or swing keel

The Tanzer 10 is a Canadian sailboat, that was designed by Richard Carter and first built in 1980.[1]

The design was later developed into the Tanzer 10.5.[1]

Production

The boat was built by Tanzer Industries Limited in Dorion, Quebec. The company entered bankruptcy in 1986 and production had ended by then.[1][2]

Design

The Tanzer 10 is a small recreational keelboat, built predominantly of fibreglass, with wood trim. It has a masthead sloop rig, a transom-hung rudder, wheel steering and a fixed fin keel or optionally a swing keel. The boat displaces 13,000 lb (5,897 kg) and carries 5,000 lb (2,268 kg) of ballast.[1]

The boat is powered by a Japanese-made Yanmar diesel engine. It has a pilothouse and inside steering.[1]

The fixed keel version has a draft of 5.92 ft (1.80 m), while the swing keel version has a draft of 6.67 ft (2.03 m) with the keel down and 2.00 ft (0.61 m) with the keel retracted.[1]

See also

References

  1. 1 2 3 4 5 6 Browning, Randy (2016). "Tanzer 10 sailboat specifications and details". sailboatdata.com. Retrieved 10 July 2016.
  2. Browning, Randy (2016). "Tanzer Industries Ltd, 1966-1986". sailboatdata.com. Retrieved 10 July 2016.
This article is issued from Wikipedia - version of the 7/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.