GBK is an extension of the GB2312 character set for simplified Chinese characters, used in the People's Republic of China. It includes all unified CJK characters found in GB13000.1-93, i.e. ISO/IEC 10646:1993, or Unicode 1.1. Since its initial release in 1993, GBK has been extended by Microsoft in Code page 936/1386, which was then extended into GBK 1.0. GBK is also the IANA-registered internet name for the Microsoft mapping, which differs from other implementations primarily by the single-byte euro sign at 0x80.
GB abbreviates Guojia Biaozhun, which means national standard in Chinese, while K stands for Extension ("扩展", "Kuozhan"). GBK not only extended the old standard GB2312 with Traditional Chinese characters, but also with Chinese characters that were simplified after the establishment of GB2312 in 1981. With the arrival of GBK, certain names with characters formerly unrepresentable, like the "róng"(镕) character in former Chinese Premier Zhu Rongji's name, are now representable. 0.3% of all web pages use GBK in January 2016.
In 1993, the Unicode 1.1 standard was released, including 20,902 characters used in mainland China, Taiwan, Japan and Korea. Following this, China released GB13000.1-93, a national standard (guóbiāo) equivalent of Unicode 1.1.
The GBK character set was defined in 1993 as an extension of GB2312-80, while also including the characters of GB13000.1-93 through the unused codepoints available in GB2312. Hence GBK is backward compatible with GB2312.
Microsoft implemented GBK in Windows 95 and Windows NT 3.51 as Code Page 936. While GBK was never an official standard, widespread usage of Windows 95 led to GBK becoming the de facto standard. While GBK included all the Chinese characters defined in Unicode 1.1 and GB13000.1-93, these standards used different code tables. The primary reason for its existence was simply to bridge the gap between GB2312-80 and GB13000.1-93.
In 1995, China National Information Technology Standardization Technical Committee set down the Chinese Internal Code Extension Specification (Chinese: 汉字内码扩展规范（GBK）; pinyin: Hànzì Nèimǎ Kuòzhǎn Guīfàn (GBK)), Version 1.0, known as GBK 1.0, which is a slight extension of Codepage 936. The newly added 95 characters were not found in GB 13000.1-1993, and were provisionally assigned Unicode PUA code points.:534
Microsoft later added the euro sign to Code page 936 and assigned the code 0x80 to it. This is not a valid code point in GBK 1.0.
In 2000, the GB18030-2000 standard was released, superseding yet maintaining compatibility with GBK 1.0. It increased the number of definitions of Chinese characters and extended the number of possible characters through the implementation of four-byte character spaces. The subset of GB 18030 consisting of one-byte and two-byte characters is sometimes also referred to as GBK. Mapping to Unicode has been slightly changed, though, as some characters are now defined in Unicode. In the most up-to-date form of the standard, GB 18030-2005, only 24 characters are still mapped to Unicode PUA (see GB 18030#PUA.)
In 2002, GBK was registered as an IANA charset; the registration uses code page 936 mapping as well as CP936/MS936 aliases, but refers to GBK 1.0 specification. W3C's technical recommendation published in 2015 defines a GBK encoder as a GB 18030 encoder with a single-byte euro sign and without four-byte sequences.
A character is encoded as 1 or 2 bytes. A byte in the range
7F is a single byte that means the same thing as it does in ASCII. Strictly speaking, there are 95 characters and 33 control codes in this range.
A byte with the high bit set indicates that it is the first of 2 bytes. Loosely speaking, the first byte is in the range
FE (that is, never
FF), and the second byte is
7F for some areas and
FE for others.
More specifically, the following ranges of bytes are defined:
|range||byte 1||byte 2||code points||characters|
|GB 18030||GBK 1.0||Codepage 936||GB 2312|
|Level GBK/1|| ||
|Level GBK/2|| || ||6,768||6,763||6,763||6,763|
|Level GBK/3|| || ||6,080||6,080||6,080|
|Level GBK/4|| || ||8,160||8,160||8,080|
|Level GBK/5|| || ||192||166||153|
|user-defined 1|| || ||564|
|user-defined 2|| || ||658|
|user-defined 3|| || ||672|
In graphical form, the following figure shows the space of all 64K possible 2-byte codes. Green and yellow areas are assigned GBK codepoints, red are for user-defined characters. The uncolored areas are invalid byte combinations.
Relationship to other encodings
The areas indicated in the previous section as GBK/1 and GBK/2, taken by themselves, is simply GB2312-80 in its usual encoding. GB2312, or more properly the EUC-CN encoding thereof, takes a pair of bytes from the range
FE, like any 94² ISO-2022 character set loaded into GR. This corresponds to the lower-right quarter of the illustration above. However, GB2312 does not assign any code points to the rows located at
FE, even though it had staked out the territory. GBK added extensions to these rows. You can see that the two gaps were filled in with user-defined areas.
More significantly, GBK extended the range of the bytes. Having two-byte characters in the ISO-2022 GR range gives a limit of 94²=8,836 possibilities. Abandoning the ISO-2022 model of strict regions for graphics and control characters, but retaining the feature of low bytes being 1-byte characters and pairs of high bytes denoting a character, you could potentially have 128²=16,384 positions. GBK takes part of that, extending the range from
FE (94 choices for each byte) to
FE (126 choices) for the first byte and
FE (191 choices) for the second byte, for a total of 24,066 positions.
Microsoft's Code Page 936 is generally thought of as being GBK. However, the 95 PUA characters added in GBK 1.0 are not included in Code Page 936. Code Page 936 also has a single-byte euro sign at 0x80 which GBK 1.0 doesn't have.
GBK's successor, GB18030-2000, uses the remaining range available to the second byte (
39) to further expand the number of possibilities while retaining GBK as a subset.
- "Character Sets". Retrieved 3 October 2016.
- "Code Page 936 - PRC GBK (XGB)". Archived from the original on 2002-10-01. Conversion map between Codepage 936 and Unicode. Need manually selecting GB18030 or GBK in browser to view it correctly.
- Standardization Administration of China (SAC) (2005-11-18). GB 18030-2005: Information Technology—Chinese coded character set.
- GB 18030-2005 Standard p.9, 79
- "Encoding Standard # gbk-encoder". W3C. Retrieved 2016-10-02.
- ICU's Authoritative GBK mapping - part of GB18030 data
- Microsoft Reference page for GBK
- Mapping of GBK to Unicode N.B.: this is Microsoft code page 936, which contains entries for 21791 double-byte code points, 96 single-byte graphic characters, and 33 control characters. This is not exactly the same as GBK which has 21886 characters.
- GBK Code Table N.B. This gbk-encoded page shows the available coding space totally populated except for 2 places, for a total of 32256 glyphs (32352 with the implied single-byte ASCII codes not illustrated), which is more than 23940 or 21886. Actual rendering of this table depends on your browser's GBK decoder.