Ammonium persulfate

Ammonium persulfate
Other names
Ammonium peroxydisulfate
7727-54-0 YesY
3D model (Jmol) Interactive image
Interactive image
ChemSpider 56400 YesY
ECHA InfoCard 100.028.897
EC Number 231-786-5
E number E923 (glazing agents, ...)
PubChem 62648
RTECS number SE0350000
UNII 22QF6L357F YesY
UN number 1444
Molar mass 228.18 g/mol
Appearance white to yellowish crystals
Density 1.98 g/cm3
Melting point 120 °C (248 °F; 393 K) decomposes
80 g/100 mL (25 °C)
Solubility Moderately soluble in MeOH
Safety data sheet External MSDS
Oxidant (O)
Harmful (Xn)
Irritant (Xi)
R-phrases R8, R22, R36/37/38, R42/43
S-phrases (S2), S22, S24, S26, S37
NFPA 704
Lethal dose or concentration (LD, LC):
689 mg/kg, oral (rat)
Related compounds
Other anions
Ammonium thiosulfate
Ammonium sulfite
Ammonium sulfate
Other cations
Sodium persulfate
Potassium persulfate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Ammonium persulfate (APS) is the inorganic compound with the formula (NH4)2S2O8. It is a colourless (white) salt that is highly soluble in water, much more so than the related potassium salt. It is a strong oxidizing agent that is used in polymer chemistry, as an etchant, and as a cleaning and bleaching agent.

The dissolution of the salt in water is an endothermic process.


Ammonium persulfate is prepared by electrolysis of a cold concentrated solution of either ammonium sulfate or ammonium bisulfate in sulfuric acid at a high current density.[1] The method was first described by H. Marshall.[2]


As an oxidizing agent and a source of radicals, APS finds many commercial applications.

Salts of sulfate are mainly used as radical initiators in the polymerization of certain alkenes. Commercially important polymers prepared using persulfates include styrene-butadiene rubber and polytetrafluoroethylene. In solution, the dianion dissociates to give radicals:[3]

[O3SO–OSO3]2− 2 [SO4]•−

The sulfate radical adds to the alkene to give a sulfate ester radical. It is also used along with tetramethylethylenediamine to catalyze the polymerization of acrylamide in making a polyacrylamide gel, hence being important for SDS-PAGE and western blot.

Illustrative of its powerful oxidizing properties, it is used to etch copper on printed circuit boards as an alternative to ferric chloride solution.[4] This property was discovered many years ago. In 1908, John William Turrentine used a dilute ammonium persulfate solution to etch copper. Turrentine weighed copper spirals before placing the copper spirals into the ammonium persulfate solution for an hour. After an hour, the spirals were weighed again and the amount of copper dissolved by ammonium persulfate was recorded. This experiment was extended to other metals such as nickel, cadmium, and iron, all of which yielded similar results.[5] The oxidation equation is thus: 12 S
(aq) + eSO2−

Ammonium persulfate is a standard ingredient in hair bleach.

Persulfates are used as oxidants in organic chemistry.[6] For example in the Minisci reaction


Airborne dust may be irritating to eye, nose, throat, lung and skin upon contact. Exposure to high levels of dust may cause difficulty in breathing.[7]

It has been noted that persulfate salts are a major cause of asthmatic effects in women.[8] Furthermore, it has been suggested that exposure to ammonium persulfate can cause asthmatic effects in hair dressers and receptionists working in the hair dressing industry. These asthmatic effects are proposed to be caused by the oxidation of cysteine residues, as well as methionine residues.[9]


  1. F. Feher, "Potassium Peroxydisulfate" in Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 1. p. 390.
  2. Hugh Marshall (1891). "LXXIV. Contributions from the Chemical Laboratory of the University of Edinburgh. No. V. The trisulphates". J. Chem. Soc., Trans. 59: 771. doi:10.1039/CT8915900771.
  3. Harald Jakob; Stefan Leininger; Thomas Lehmann; Sylvia Jacobi; Sven Gutewort (2005), "Peroxo Compounds, Inorganic", Ullmann's Encyclopedia of Industrial Chemistry, Weinheim: Wiley-VCH, doi:10.1002/14356007.a19_177.pub2
  4. "Ammonium Persulphate: Copper Etchant". MG Chemicals.
  5. Turrentine, J. W. (1908). "Action of Ammonium Persulphate on Metals.". Journal of Physical Chemistry. 11: 623–631. doi:10.1021/j150089a004.
  6. Encyclopedia of Reagents for Organic Synthesis, vol. 1, pp. 193–197 (1995).
  7. "Archived copy" (PDF). Archived from the original (PDF) on 2011-07-11. Retrieved 2010-03-08. FMC Corporation, MSDS sheet dated: 2009-06-26
  8. De Vooght, V.; Jesus Cruz, M.; Haenen, S.; Wijnhoven, K.; Munoz, X.; Cruz, M.; Munoz, X.; Morell, F.; Nemery, B (2010). "Ammonium persulfate can initiate an asthmatic response in mice.". Thorax. 65: 252–257. doi:10.1136/thx.2009.121293.
  9. Pignatti, P.; Frossi, B.; Pala, G.; Negri, S.; Oman, H.; Perfetti, L.; Pucillo, C.; Imbriani, M.; Moscato, G. (2013). "Oxidative activity of ammonium persulfate salt on mast cells and basophils: implication in hairdressers' asthma.". Int. Arch. Allergy Immunol. 160: 409–419. doi:10.1159/000343020.

External links

This article is issued from Wikipedia - version of the 10/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.