| IUPAC names
|3D model (Jmol)||Interactive image|
|Molar mass||233.04 g/mol|
|Appearance|| white crystals |
|Melting point||437 °C (819 °F; 710 K) (triple point)|
|Boiling point||331 °C (628 °F; 604 K) (sublimes)|
|Solubility||soluble in alcohol, ether, concentrated HCl|
|P12/c1, No. 13|
|125.38 J K−1 mol−1|
|181.41 J K−1 mol−1|
Std enthalpy of
|Safety data sheet||MSDS|
|Lethal dose or concentration (LD, LC):|
LD50 (median dose)
| 1688 mg/kg (oral, rat)|
655 mg/kg (mouse, oral)
| Zirconium(IV) fluoride|
| Titanium tetrachloride|
|Zirconium(II) chloride, Zirconium(III) chloride|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|(what is ?)|
Zirconium(IV) chloride, also known as zirconium tetrachloride, (ZrCl4) is an inorganic compound frequently used as a precursor to other compounds of zirconium. This white high-melting solid hydrolyzes rapidly in humid air.
Unlike molecular TiCl4, solid ZrCl4 adopts a polymeric structure wherein each Zr is octahedrally coordinated. This difference in structures is responsible for the striking difference in their properties: TiCl
4 is distillable, but ZrCl
4 is a solid with a high melting point. In the solid state, ZrCl4 adopts a tape-like linear polymeric structure—the same structure adopted by HfCl4. This polymer degrades readily upon treatment with Lewis bases, which cleave the Zr-Cl-Zr linkages.
This conversion entails treatment of the oxide with carbon as the oxide "getter" and chlorine.
- ZrO2 + 2 C + 2 Cl2 → ZrCl4 + 2 CO
A laboratory scale process uses carbon tetrachloride in place of carbon and chlorine:
- ZrO2 + 2 CCl4 → ZrCl4 + 2 COCl2
Precursor to Zr metal
ZrCl4 is an intermediate in the conversion of zirconium minerals to metallic zirconium by the Kroll process. In nature, zirconium minerals invariably exist as oxides (reflected also by the tendency of all zirconium chlorides to hydrolyze). For their conversion to bulk metal, these refractory oxides are first converted to the tetrachloride, which can be distilled at high temperatures. The purified ZrCl4 can be reduced with Zr metal to produce zirconium(III) chloride.
In organic synthesis zirconium tetrachloride is used as a weak Lewis acid for the Friedel-Crafts reaction, the Diels-Alder reaction and intramolecular cyclisation reactions. It is also used to make water-repellent treatment of textiles and other fibrous materials.
Properties and reactions
Hydrolysis of ZrCl4 gives the hydrated hydroxy chloride cluster called zirconyl chloride. This reaction is rapid and virtually irreversible, consistent with the high oxophilicity of zirconium(IV). For this reason, manipulations of ZrCl4 typically require air-free techniques.
ZrCl4 is the principal starting compound for the synthesis of many organometallic complexes of zirconium. Because of its polymeric structure, ZrCl4 is usually converted to a molecular complex before use. It forms a 1:2 complex with tetrahydrofuran: CAS [21959-01-3], mp 175–177 °C. NaC5H5 reacts with ZrCl4(THF)2 to give zirconocene dichloride, ZrCl2(C5H5)2, a versatile organozirconium complex. One of the most curious properties of ZrCl4 is its high solubility in the presence of methylated benzenes, such as durene. This solubilization arises through the formation of π-complexes.
The log (base 10) of the vapor pressure of zirconium tetrachloride (from 480 to 689 K) is given by the equation: log10(P) =−5400/T +11.766; where the pressure is measured in torr and temperature in kelvin. The log (base 10) of the vapor pressure of solid zirconium tetrachloride (from 710 to 741 K) is given by the equation log10(P) =−3427/T +9.088. The pressure at the melting point is 14,500 torr.
|Wikimedia Commons has media related to zirconium(IV) chloride.|
- "Zirconium compounds (as Zr)". Immediately Dangerous to Life and Health. National Institute for Occupational Safety and Health (NIOSH).
- N. N. Greenwood & A. Earnshaw, Chemistry of the Elements (2nd ed.), Butterworth-Heinemann, Oxford, 1997.
- Hummers, W. S.; Tyree, S. Y.; Yolles, S. (1953). "Zirconium and Hafnium Tetrachlorides". Inorganic Syntheses. IV. McGraw-Hill Book Company, Inc. p. 121. doi:10.1002/9780470132357.ch41.
- Randich, E. (1 November 1979). "Chemical vapor deposited borides of the form (Ti,Zr)B2 and (Ta,Ti)B2". Thin Solid Films. 63 (2): 309–313. Bibcode:1979TSF....63..309R. doi:10.1016/0040-6090(79)90034-8.
- Bora U. (2003). "Zirconium Tetrachloride". Synlett (7): 1073–1074. doi:10.1055/s-2003-39323.
- Ilan Marek, ed. (2005). New Aspects of Zirconium Containing Organic Compounds. Topics in Organometallic Chemistry. 10. Springer: Berlin, Heidelberg, New York. doi:10.1007/b80198. ISBN 978-3-540-22221-7. ISSN 1436-6002.
- L. E. Manzer; Joe Deaton (1982). "Tetrahydrofuran Complexes of Selected Early Transition Metals". Inorganic Syntheses. Inorganic Syntheses. 21: 135–140. doi:10.1002/9780470132524.ch31. ISBN 978-0-470-13252-4.
- Wilkinson, G.; Birmingham, J. G. (1954). "Bis-cyclopentadienyl Compounds of Ti, Zr, V, Nb and Ta". J. Am. Chem. Soc. 76 (17): 4281–4284. doi:10.1021/ja01646a008.
- Musso, F.; Solari, E.; Floriani, C.; Schenk, K. (1997). "Hydrocarbon Activation with Metal Halides: Zirconium Tetrachloride Catalyzing the Jacobsen Reaction and Assisting the Trimerization of Alkynes via the Formation of η6-Arene-Zirconium(IV) Complexes". Organometallics. 16 (22): 4889–4895. doi:10.1021/om970438g.
- Palko, A. A.; Ryon, A. D.; Kuhn, D. W. (March 1958). "The Vapor Pressures of Zirconium Tetrachloride and Hafnium Tetrachloride". J. Phys. Chem. 62: 319–322. doi:10.1021/j150561a017.