Type 89 grenade discharger

"Knee mortar" redirects here. For other Japanese weapon also known as "knee mortar", see Type 10 grenade discharger.
Type 89 Grenade Discharger

Type 89 Grenade Discharger with various grenades, shells, and accessories
Type Grenade launcher
Place of origin  Empire of Japan
Service history
In service 1929–1945 (Japan)
Used by Imperial Japanese Army
Indonesian National Army
Wars Soviet–Japanese border conflicts,
Second Sino-Japanese War,
World War II
Indonesian National Revolution
Specifications
Weight 4.7 kg (10 lb 6 oz)
Length 610 mm (24 in)
Barrel length 254 mm (10 in)

Cartridge 793 g (28 oz)
Caliber 50 mm (1.97 in)
Rate of fire 25 rpm
Effective firing range (Type 89 shell):
120 m (131 yd)
Maximum firing range (Type 89 shell):
670 m (732 yd)
Type 89 discharger with Type 89 HE shell. More views
Type 91 Fragmentation grenade.
Type 89 50 mm incendiary shell.

The Type 89 Grenade Discharger (八九式重擲弾筒 Hachikyū-shiki jū-tekidantō), inaccurately and colloquially known as a knee mortar by Allied forces, is a Japanese grenade launcher or light mortar that was widely used in the Pacific Ocean theatre of World War II.

Background

The Japanese Army, noting that grenades were short-ranged weapons, began efforts to optimize these weapons for close-in infantry fighting. After studying employment of grenades and mortars on the battlefield, the Japanese Army developed hand grenades, rifle grenades, and grenade/mortar shell dischargers (small mortars) suited to warfare in typical short-range combat environments such as urban, trench, and jungle warfare.

As part of this effort, the Japanese Army had adopted by 1932 a set of fragmentation grenades with almost universal adaptability. The Type 91 fragmentation grenade could be thrown by hand, fired from a spigot-type launcher, or used in a mortar-like grenade discharger, the Type 89.[1]

Design and operation

The Type 89 Heavy Grenade Discharger was adopted in 1929, however production did not begin until 1932. It differs from the earlier Type 10 grenade discharger in that it has a rifled barrel. The Type 89 could fire two types of grenades or shells: the Type 91 Grenade, which was a normal infantry fragmentation grenade adapted to the Type 89 discharger, and the Type 89 50 mm shell, which was an impact-detonated shell with considerably more explosive power.

When fired from the Type 89 discharger, the Type 91 fragmentation grenade was fitted with a propellant base and time fuse. It did not explode upon contact, but was designed to ignite its fuse while in flight. A weak creep spring inside the grenade firing mechanism allowed the firing pin to be thrown back upon launching, igniting a time fuse with a 7-8 second delay. Using this system, the Type 91 grenades could be launched through jungle cover or through small openings without the danger of premature detonation in the event the grenade struck an object on its way to the target.[2] Although the Type 89 could be fired by a single person, it was typically operated with a crew of 3, enabling it to reach a rate of fire of about 25 rounds per minute.[3]

The Type 89 discharger could also be used with a more powerful impact-detonated shell approaching the power of a light mortar. Weighing approximately two pounds (approx. 900 g), it was known as the Type 89 50mm shell, and was made in high explosive (HE), incendiary and smoke variants. To fire the shell (which had a nose-mounted impact fuse that detonated on contact), it was dropped base-down inside the tube of the discharger. By setting the Type 89 discharger at a fixed angle of 45 degrees, and varying distance to target by adjusting the size of a variable chamber space inside the discharger mechanism (See also the Granatnik wz. 36), soldiers could adjust fire onto multiple targets at varying ranges while firing the contact-detonated 50 mm shell through a single small clearing in the jungle canopy.[4] The method worked equally well when firing from deep trenches or pits, or between various building obstructions when fighting inside a built-up town or city.[4]

With its curved support plate, the Type 89 was designed to be placed on the ground or against a log or trunk at a fixed firing angle of 45 degrees. However, since it used a spring-loaded, lanyard-operated firing pin mechanism, in an emergency it could fire grenades or shells at point targets while braced horizontally against a tree or building.

Combat use

The Type 89 discharger first saw service in China and Manchuria. During World War II, the weapon was used in Burma, China, and the Pacific islands. The Japanese Navy paratroopers carried special containers for the Type 89 clipped to their harnesses to provide fire support right on the landing zone.[5] Allied troops soon learned to hit the ground when they heard the telltale "pop" of the weapon launching its grenades or shells, in some cases from more than 200 yards (183 m) away.[1] Some Allied infantrymen mistakenly assumed that the launcher's curve plate was propped on the leg to fire and thereafter referred to it as a "knee mortar." However, any soldier or marine who tried to fire a captured Type 89 in this fashion received a severe bruise (and sometimes a broken thigh bone) from the hefty recoil.[5]

The Type 89 discharger and its ammunition was responsible for many Chinese and later, Allied casualties after the start of World War II.

After World War II the Type 89 was used by Indonesian National Army and militias against Dutch forces in the Indonesian National Revolution, with copies of the weapon manufactured in Demakijo, Yogyakarta.

Ammunition

Notes

  1. 1 2 George, John B. (LTC) (1981). Shots Fired In Anger. NRA Press. p. 343. ISBN 0-935998-42-X.
  2. George, John B. (LTC) (1981). Shots Fired In Anger. NRA Press. p. 350. ISBN 0-935998-42-X.
  3. Japanese Ordnance Material of WW II at the Wayback Machine (archived December 9, 2004)
  4. 1 2 George, John B. (LTC) (1981). Shots Fired In Anger. NRA Press. p. 359. ISBN 0-935998-42-X. By using a fixed firing angle for the discharger, combined with a variable chamber, the Japanese were able to fire the 50 mm Type 89 shell to varying distances through small clearings above the discharger by adjusting the maximum height of trajectory.
  5. 1 2 Norris, John (2002). Infantry Mortars of World War II. Osprey, p. 47. ISBN 1841764140

References

See also

This article is issued from Wikipedia - version of the 11/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.