Truck

"Trucks" redirects here. For other uses, see Truck (disambiguation).
"Lorry" redirects here. For other uses, see Lorry (disambiguation).
Freightliner M2 dump truck

A truck (United States, Canada, Australia, New Zealand, Puerto Rico and Pakistan; also called a lorry in the United Kingdom, Ireland, South Africa, Malaysia, Singapore, and India) is a motor vehicle designed to transport cargo. Trucks vary greatly in size, power, and configuration, with the smallest being mechanically similar to and larger than an automobile. Commercial trucks can be very large and powerful, and may be configured to mount specialized equipment, such as in the case of fire trucks and concrete mixers and suction excavators.

Modern trucks are largely powered by diesel engines, although small to medium size trucks with gasoline engines exist in the US. In the European Union, vehicles with a gross combination mass of up to 7,700 lb (3.5 t) are known as light commercial vehicles, and those over as large goods vehicles.

Early flatbed
Moving van
Mack AC dump truck

History

Steam wagons

A British, 1931-built Sentinel steam waggon
Sentinel DG8, Beamish Steam Fair
Main article: Steam wagon

Trucks and cars have a common ancestor: the steam-powered fardier Nicolas-Joseph Cugnot built in 1769. However, steam wagons were not common until the mid-1800s. The roads of the time, built for horse and carriages, limited these vehicles to very short hauls, usually from a factory to the nearest railway station. The first semi-trailer appeared in 1881, towed by a steam tractor manufactured by De Dion-Bouton. Steam-powered wagons were sold in France and the United States until the eve of World War I, and 1935 in the United Kingdom, when a change in road tax rules made them uneconomic against the new diesel lorries.

Internal combustion

A Benz truck modified by Netphener company (1895)
DMG Lastkraftwagen, 1896

In 1895 Karl Benz designed and built the first truck in history using the internal combustion engine. Later that year some of Benz's trucks were modified to become the first bus by the Netphener, the first motorbus company in history. A year later, in 1896, another internal combustion engine truck was built by Gottlieb Daimler.[1] Other companies, such as Peugeot, Renault and Büssing, also built their own versions. The first truck in the United States was built by Autocar in 1899 and was available with optional 5 or 8 horsepower motors.[2]

Trucks of the era mostly used two-cylinder engines and had a carrying capacity of 3,300 to 4,400 lb (1.5 to 2 t). In 1904, 700 heavy trucks were built in the United States, 1000 in 1907, 6000 in 1910, and 25000 in 1914.

After World War I, several advances were made: pneumatic tires replaced the previously common full rubber versions. Electric starters, power brakes, 4, 6, and 8 cylinder engines, closed cabs, and electric lighting followed. The first modern semi-trailer trucks also appeared. Touring car builders such as Ford and Renault entered the heavy truck market.

Diesel engines


1931 Foden diesel
1932 Mercedes-Benz diesel

Although it had been invented in 1890, the diesel engine was not common in trucks in Europe until the 1930s. In the United States, it took much longer for diesel engines to be accepted: gasoline engines were still in use on heavy trucks in the 1970s.[3][4]

Etymology

The word "truck" might come from a back-formation of "truckle", meaning "small wheel" or "pulley", from Middle English trokell, in turn from Latin trochlea. Another possible source is the Latin trochus, meaning "iron hoop". In turn, both sources emanate from the Greek trokhos (τροχός), meaning "wheel", from trekhein (τρέχειν, "to run").

The first known usage of "truck" was in 1611, when it referred to the small strong wheels on ships' cannon carriages. In its extended usage it came to refer to carts for carrying heavy loads, a meaning known since 1771. Its expanded application to "motor-powered load carrier" has been in usage since 1930, shortened from "motor truck", which dates back to 1901.[5][6]

"Lorry" has a more uncertain origin, but probably has its roots in the rail transport industry, where the word is known to have been used in 1838 to refer to a type of truck (a goods wagon as in British usage, not a bogie as in the American), specifically a large flat wagon. It probably derives from the verb lurry (to pull, tug) of uncertain origin. Its expanded meaning, "self-propelled vehicle for carrying goods", has been in usage since 1911.[7][8] Before that, the word "lorry" was used for a sort of big horse-drawn goods wagon.

International variance

For more details on this topic, see List of truck types.

In the United States, Canada, and the Philippines "truck" is usually reserved for commercial vehicles larger than normal cars, and includes pickups and other vehicles having an open load bed. In Australia, New Zealand and South Africa, the word "truck" is mostly reserved for larger vehicles; in Australia and New Zealand, a pickup truck is usually called a ute (short for "utility"),[9] while in South Africa it is called a bakkie (Afrikaans: "small open container"). In the United Kingdom, India, Malaysia, Singapore, Ireland and Hong Kong lorry is used instead of truck, but only for the medium and heavy types.

Types of trucks by size

Ultra light trucks

Often produced as variations of golf cars, with internal combustion or battery electric drive, these are used typically for off-highway use on estates, golf courses, and parks. While not suitable for highway use some variations may be licensed as slow speed vehicles for operation on streets, generally as a body variation of a neighborhood electric vehicle. A few manufactures produce specialized chassis for this type of vehicle, while Zap Motors markets a version of their xebra electric tricycle (licensable in the U.S. as a motorcycle).

Very light trucks

Ashok Dost Stand in Faizabad in India

Popular in Europe and Asia, many mini trucks are factory redesigns of light automobiles, usually with monocoque bodies. Specialized designs with substantial frames such as the Italian Piaggio shown here are based upon Japanese designs (in this case by Daihatsu) and are popular for use in "old town" sections of European cities that often have very narrow alleyways.

Regardless of name, these small trucks serve a wide range of uses. In Japan, they are regulated under the Kei car laws, which allow vehicle owners a break in taxes for buying a smaller and less-powerful vehicle (currently, the engine is limited to 660 cc displacement). These vehicles are used as on-road utility vehicles in Japan. These Japanese-made mini trucks that were manufactured for on-road use are competing with off-road ATVs in the United States, and import regulations require that these mini trucks have a 25 mph (40 km/h) speed governor as they are classified as low speed vehicles.[10] These vehicles have found uses in construction, large campuses (government, university, and industrial), agriculture, cattle ranches, amusement parks, and replacements for golf carts.[11]

Major mini truck manufacturers and their brands:

Light trucks

London van
Dongfeng pickup

Light trucks are car-sized (in the US, no more than 13,900 lb (6.3 t) and are used by individuals and businesses alike. In the UK they may not weigh more than 7,700 lb (3.5 t), and are allowed to be driven with a driving licence for cars. Pickup trucks, called utes in Australia and New Zealand, are common in North America and some regions of Latin America, Asia and Africa, but not so in Europe, where this size of commercial vehicle is most often made as vans.

Medium trucks

Isuzu truck

Medium trucks are larger than light but smaller than heavy trucks. In the US, they are defined as weighing between 13,000 and 33,000 lb (5.9 and 15.0 t). For the UK and the EU the weight is between 7,700 to 16,500 lb (3.5 to 7.5 t). Local delivery and public service (dump trucks, garbage trucks and fire-fighting trucks) are normally around this size.

Heavy trucks

A cement mixer is an example of a Class 8 heavy truck
Seddon Atkinson Stratos refuse compactor

Heavy trucks are the largest on-road trucks, Class 8. These include vocational applications such as heavy dump trucks, concrete pump trucks, and refuse hauling, as well as ubiquitous long-haul 4x2 and 6×4 tractor units.[12]

Road damage and wear increase very rapidly with the axle weight. The number of steering axles and the suspension type also influence the amount of the road wear. In many countries with good roads a six-axle truck may have a maximum weight of 97,000 lb (44 t) or more.

Off-road trucks

ALMA antenna transporters weigh 287,000 lb (130 t) and drive on 28 tires.[13]
Liebherr T 282B mining truck

Off-road trucks include standard, extra heavy-duty highway-legal trucks, typically outfitted with off-road features such as a front driving axle and special tires for applications such as logging and construction, and purpose-built off-road vehicles unconstrained by weight limits, such as the Liebherr T 282B mining truck.

Maximum sizes by country

Australia has complex regulations over weight and length, including axle spacing, type of axle/axle group, rear overhang, kingpin to rear of trailer, drawbar length, ground clearance, as well as height and width laws. These limits are some of the highest in the world, a B-double can weigh 137,000 lb (62 t) and be 82 ft (25 m) long, and road trains used in the "outback" can weigh 379,000 lb (172 t) and be 176 ft (53.5 m) long.[14][15]

The European Union also has complex regulations. The number and spacing of axles, steering, single or dual tires, and suspension type all affect maximum weights. Length of a truck, of a trailer, from axle to hitch point, kingpin to rear of trailer, and turning radius are all regulated. In additions, there are special rules for carrying containers, and countries can set their own rules for local traffic.[16]

The United States Federal Bridge Law deals with the relation between the gross weight of the truck, the number of axles, the weight on and the spacing between the axles that the truck can have on the Interstate highway system.[17] Each State determines the maximum permissible vehicle, combination, and axle weight on state and local roads.

A road train in Australia
CountryMaximum
with three axles
With one trailerMaximum combination
Australia[14][15]50,700 lb (23 t)39 ft (12 m) 379,000 lb (172 t)
176 ft (53.5 m)
China[18]55,100 lb (25 t)
39 ft (12 m)
108,000 lb (49 t)
54 ft (16.5 m)
121,000 lb (55 t)
62 ft (18.75 m)
EU[16]57,300 lb (26 t)
39 ft (12 m)
54 ft (16.5 m) 97,000 lb (44 t)
62 ft (18.75 m)
Ireland[19]63,900 lb (29 t)
39 feet (12 m)
66,100 lb (30 t)
54 feet (16.5 m)
97,000 lb (44 t)
72 ft (22 m)
UK [20][21]57,300 lb (26 t)
39 ft (12 m)
97,000 lb (44 t)
52 ft (16 m)
97,000 lb (44 t)
62 ft (18.75 m)
USA[22][23]
(Interstate)
54,000 lb (24.5 t)
45 ft (13.7 m)
80,000 lb (36.3 t)
none
80,000 lb (36.3 t)
none

Anatomy

Almost all trucks share a common construction: they are made of a chassis, a cab, an area for placing cargo or equipment, axles, suspension and roadwheels, an engine and a drivetrain. Pneumatic, hydraulic, water, and electrical systems may also be present. Many also tow one or more trailers or semi-trailers.

Cab

Flat nose truck
Streamlined conventional cab

The cab is an enclosed space where the driver is seated. A "sleeper" is a compartment attached to or integral with the cab where the driver can rest while not driving, sometimes seen in semi-trailer trucks.

There are several possible cab configurations:

A further step from this is the side loading forklift that can be described as a specially fabricated vehicle with the same properties as a truck of this type, in addition to the ability to pick up its own load.

Engine

Cummins ISB 6.7L medium duty truck diesel engine

Most small trucks such as sport utility vehicles (SUVs) or pickups, and even light medium-duty trucks in North America, China, and Russia use gasoline engines (petrol engines), but many diesel engined models are now being produced. Most of the heavier trucks use four-stroke diesel engines with a turbocharger and intercooler. Huge off-highway trucks use locomotive-type engines such as a V12 Detroit Diesel two stroke engine. Diesel engines are becoming the engine of choice for trucks ranging from class 3 to 8 GVWs. A large proportion of refuse trucks in the United States employ CNG (compressed natural gas) engines for their low fuel cost and reduced carbon emissions.

North American manufactured highway trucks often use an engine built by a third party, such as CAT, Cummins, or Detroit Diesel, but both Mack and Navistar offer their own engines.[26]

In the European Union, all new truck engines must comply with Euro 5 emission regulations.

Drivetrain

A truck rear suspension and drive axles overview
Eaton Roadranger 18 speed "crash box" with automated gearshift

Small trucks use the same type of transmissions as almost all cars, having either an automatic transmission or a manual transmission with synchromesh (synchronizers). Bigger trucks often use manual transmissions without synchronizers, saving bulk and weight, although synchromesh transmissions are used in larger trucks as well. Transmissions without synchronizers, known as "crash boxes", require double-clutching for each shift, (which can lead to repetitive motion injuries), or a technique known colloquially as "floating", a method of changing gears which doesn't use the clutch, except for starts and stops, due to the physical effort of double clutching, especially with non-power-assisted clutches, faster shifts, and less clutch wear.

Double-clutching allows the driver to control the engine and transmission revolutions to synchronize, so that a smooth shift can be made; for example, when upshifting, the accelerator pedal is released and the clutch pedal is depressed while the gear lever is moved into neutral, the clutch pedal is then released and quickly pushed down again while the gear lever is moved to the next higher gear. Finally, the clutch pedal is released and the accelerator pedal pushed down to obtain required engine speed. Although this is a relatively fast movement, perhaps a second or so while transmission is in neutral, it allows the engine speed to drop and synchronize engine and transmission revolutions relative to the road speed. Downshifting is performed in a similar fashion, except the engine speed is now required to increase (while transmission is in neutral) just the right amount in order to achieve the synchronization for a smooth, non-collision gear change. "Skip changing" is also widely used; in principle operation is the same as double-clutching, but it requires neutral be held slightly longer than a single-gear change.

Common North American setups include 9, 10, 13, 15, and 18 speeds. Automatic and semi-automatic transmissions for heavy trucks are becoming more and more common, due to advances both in transmission and engine power. In Europe, 8, 10, 12 and 16 gears are common on larger trucks with manual transmission, while automatic or semi-automatic transmissions would have anything from 5 to 12 gears. Almost all heavy truck transmissions are of the "range and split" (double H shift pattern) type, where range change and so‑called half gears or splits are air operated and always preselected before the main gear selection.

Frame

A truck rear frame (chassis) section view
Pickup truck frame (right rear view)

A truck frame consists of two parallel boxed (tubular) or C‑shaped rails, or beams, held together by crossmembers. These frames are referred to as ladder frames due to their resemblance to a ladder if tipped on end. The rails consist of a tall vertical section (two if boxed) and two shorter horizontal flanges. The height of the vertical section provides opposition to vertical flex when weight is applied to the top of the frame (beam resistance). Though typically flat the whole length on heavy duty trucks, the rails may sometimes be tapered or arched for clearance around the engine or over the axles. The holes in rails are used either for mounting vehicle components and running wires and hoses, or measuring and adjusting the orientation of the rails at the factory or repair shop.

The frame is usually made of steel, but can be made (whole or in part) of aluminum for a lighter weight. A tow bar may be found attached at one or both ends, but heavy trucks almost always make use of a fifth wheel hitch.

Body types

Box trucks ("tilts" in the UK) have walls and a roof, making an enclosed load space. The rear has doors for unloading; a side door is sometimes fitted.[27]

Concrete mixers have a rotating drum on an inclined axis, rotating in one direction to mix, and in the other to discharge the concrete down chutes. Because of the weight and power requirements of the drum body and rough construction sites, mixers have to be very heavy duty.[28][29]

Dump trucks ("tippers" in the UK) transport loose material such as sand, gravel, or dirt for construction. A typical dump truck has an open-box bed, which is hinged at the rear and lifts at the front, allowing the material in the bed to be unloaded ("dumped") on the ground behind the truck.[30][31]

Flatbed trucks have an entirely flat, level platform body. This allows for quick and easy loading but has no protection for the load. Hanging or removable sides are sometimes fitted.[32]

Semi-tractors ("artics" in the UK) have a fifth wheel for towing a semi-trailer instead of a body.

Tank trucks ("tankers" in the UK) are designed to carry liquids or gases. They usually have a cylindrical tank lying horizontally on the chassis. Many variants exist due to the wide variety of liquids and gases that can be transported.[33]

Wreckers ("recovery lorries" in the UK) are used to recover and/or tow disabled vehicles. They are normally equipped with a boom with a cable; wheel/chassis lifts are becoming common on newer trucks.[34][35][36]

Sales and sales issues

Manufacturers

Truck market worldwide

Largest truck manufacturers in the world as of 2015.
Pos.MakeUnits
1 Volvo Group (Volvo, Mack, Renault, UD Nissan)868,000[37]
2 Daimler AG (Mercedes-Benz, Freightliner, Sterling, Unimog, Western Star, Fuso, BharatBenz)506,663[38]
3 Navistar International359,000[39]
4 Dongfeng336,869[40]
5 Tata317,780[41]
6 Volkswagen Group (MAN, Scania)179,035[42]
7 Hino162,870[43]
8 PACCAR (DAF, Kenworth, Peterbilt, Leyland)154,700[44]
9 Iveco 140,200[45]

Driving

In many countries, driving a truck requires a special driving license. The requirements and limitations vary with each different jurisdiction.

Australia

Inside a Mack truck

In Australia, a truck driver's license is required for any motor vehicle with a Gross Vehicle Mass (GVM) exceeding 9,900 lb (4.5 t). The motor vehicles classes are further expanded as:

Combination
Rigid
Heavy vehicle transmission

There is also a heavy vehicle transmission condition for a license class HC, HR, or MC test passed in a vehicle fitted with an automatic or synchromesh transmission; a driver's license will be restricted to vehicles of that class fitted with a synchromesh or automatic transmission. To have the condition removed, a person needs to pass a practical driving test in a vehicle with non-synchromesh transmission (constant mesh or crash box).[46]

Europe

Inside a Mercedes-Benz truck

Driving licensing has been harmonized throughout the European Union (and practically all European non-member states), so that common, albeit complex rules apply within Europe (see European driving licence). As an overview, to drive a vehicle weighing more than 7.5 t (16,500 lb) for commercial purposes requires a specialist license (the type varies depending on the use of the vehicle and number of seats). For licenses first acquired after 1997, that weight was reduced to 3.5 t (7,700 lb), not including trailers.

India

There are around 50 lakhs (5 million) truck drivers in India.[47]

South Africa

To drive any vehicle with a GVM exceeding 3.5 t (7,700 lb), a code C1 drivers license is required. Furthermore, if the vehicle exceeds 16 t (35,300 lb) a code C license becomes necessary.

To drive any vehicle in South Africa towing a trailer with a GVM more than 7.5 t (16,500 lb), further restrictions apply and the driver must possess a license suitable for the GVM of the total combination as well as an articulated endorsement. This is indicated with the letter "E" prefixing the license code.

In addition, any vehicle designed to carry goods or passengers may only be driven by a driver possessing a Public Driver's Permit, (or PrDP) of the applicable type. This is an additional license that is added to the DL card of the operator and subject to annual renewal unlike the five-year renewal period of a normal license.

The requirements for obtaining the different classes are below.

United States

Inside a Navistar 9000

In the United States, a commercial driver's license is required to drive any type of commercial vehicle weighing 26,001 lb (11.8 t) or more.[48] The federal government regulates how many hours a driver may be on the clock, how much rest and sleep time is required (e.g., 11 hours driving/14 hours on-duty followed by 10 hours off, with a maximum of 70 hours/8 days or 60 hours/7 days, 34 hours restart )[49] Violations are often subject to significant penalties. Instruments to track each driver's hours must sometimes be fitted. In 2006 the US trucking industry employed 1.8 million drivers of heavy trucks.[50]

Environmental effects

See also: Diesel exhaust
DAF tractor with an auto-transport semi-trailer carrying Škoda Octavia cars in Cardiff, Wales

Trucks contribute to air, noise, and water pollution similarly to automobiles. Trucks may emit lower air pollution emissions than cars per equivalent vehicle mass, although the absolute level per vehicle distance traveled is higher, and diesel particulate matter is especially problematic for health.[51] EPA measures pollution from trucks.[52] With respect to noise pollution, trucks emit considerably higher sound levels at all speeds compared to typical cars; this contrast is particularly strong with heavy-duty trucks.[53] There are several aspects of truck operations that contribute to the overall sound that is emitted. Continuous sounds are those from tires rolling on the roadway, and the constant hum of their diesel engines at highway speeds. Less frequent noises, but perhaps more noticeable, are things like the repeated sharp-pitched whistle of a turbocharger on acceleration, or the abrupt blare of an exhaust brake retarder when traversing a downgrade. There has been noise regulation put in place to help control where and when the use of engine braking retarders are allowed.

Concerns have been raised about the effect of trucking on the environment, particularly as part of the debate on global warming. In the period from 1990 to 2003, carbon dioxide emissions from transportation sources increased by 20%, despite improvements in vehicle fuel efficiency.[54]

Volvo's subsidiary Renault Magnum Tractor unit

In 2005, transportation accounted for 27% of U.S. greenhouse gas emission, increasing faster than any other sector.[55]

Between 1985 and 2004, in the U.S., energy consumption in freight transportation grew nearly 53%, while the number of ton-miles carried increased only 43%.[56]

According to a 1995 U.S. government estimate, the energy cost of carrying one ton of freight a distance of one kilometer averages 337 kJ for water, 221 kJ for rail, 2,000 kJ for trucks, and nearly 13,000 kJ for air transport.[57] Many environmental organizations favor laws and incentives to encourage the switch from road to rail, especially in Europe.[58]

The European Parliament is moving to ensure that charges on heavy-goods vehicles should be based in part on the air and noise pollution they produce and the congestion they cause, according to legislation approved by the Transport Committee.[59] The Eurovignette scheme has been proposed, whereby new charges would be potentially levied against things such as noise and air pollution and also weight related damages from the lorries themselves.[60]

Operations issues

Taxes

Commercial trucks in the US pay higher road use taxes on a state level than other road vehicles, and are subject to extensive regulation.[61] A few reasons commercial trucks pay higher road use taxes: they are bigger and heavier than most other vehicles, and cause more wear and tear per hour on roadways; and trucks and their drivers are on the road for more hours per day. Rules on use taxes differ among jurisdictions.

Damage to pavement

The life of a pavement is measured by the number of passes of a vehicle axle. It may be evaluated using the Load Equivalency Factor,[62] which states that the damage by the pass of a vehicle axle is proportional to the 4th power of the weight, so a ten-ton axle consumes 10,000 times the life of the pavement as a one-ton axle. For that reason, loaded trucks cost the same as thousands of cars in pavement costs, and are subject to higher taxes and highway tolls.

Commercial insurance

Primary liability insurance coverage protects the truck from damage or injuries to other people as a result of a truck accident. This truck insurance coverage is mandated by U.S. state and federal agencies, and proof of coverage is required to be sent to them. Interstate trucks in the U.S. are required to have a minimum of $75,000 in liability insurance. This includes motor carriers operating vehicles with a gross weight rating in excess of 10,000 lb (4.5 t) (which transport non-hazardous materials). All motor carriers operating vehicles transporting materials classified as hazardous, and which have a gross weight rating in excess of 10,000 lb (4.5 t) must have a minimum of $1,000,000 in liability insurance. All motor carriers operating vehicles such as hopper-type cargo vehicles or tankers with a capacity in excess of 3,500 US gal (13,000 l) must have a minimum of $5,000,000 in liability insurance. Pricing is dependent on region, driving records, and history of the trucking operation.

Motor truck cargo insurance protects the transporter for his responsibility in the event of damaged or lost freight. The policy is purchased with a maximum load limit per vehicle. Cargo insurance coverage limits can range from $10,000 to $100,000 or more. Pricing for this insurance is mainly dependent on the type of cargo being hauled.

Trucking accidents

Trucking accident at Elst (Netherlands) 2012-03-23

In 2002 and 2004, there were over 5,000 fatalities related to trucking accidents in the United States. The trucking industry has since made significant efforts in increasing safety regulations. In 2008 the industry had successfully lowered the fatality rate to just over 4,000 deaths. But trucking accidents are still an issue that causes thousands of deaths and injuries each year. Approximately 6,000 trucking accident fatalities occur annually in the United States. Fatalities are not the only issue caused by trucking accidents. Here are some of the environmental issues that arise with trucking accidents:

Following increased pressure from The Times "Cities Fit For Cycling" campaign and from other media in Spring 2012, warning signs are now displayed on the backs of many HGVs. These signs are directed against a common type of accident which occurs when the large vehicle turns left at a junction: a cyclist trying to pass on the nearside can be crushed against the HGV's wheels, especially if the driver cannot see the cyclist. The signs, such as the winning design of the InTANDEM road safety competition launched in March 2012, advocate extra care when passing a large vehicle on the nearside.

Truck shows

Custom truck at a Yorkshire truck show

In the UK, three truck shows are popular – Shropshire Truck Show[63] in Oswestry Showground during May, The UK Truck Show held in June at Santa Pod Raceway, and FIA European Drag Racing Championships from the home of European Drag-Racing. The UK Truck Show features drag-racing with 6-tonne trucks from the British Truck Racing Association, plus other diesel-powered entertainment.

In Mexico, the ANPACT Autotransporte – Truck Show is well known as one of the biggest of the region; 2013 edition features trucker celebrity Lisa Kelly.

Truck shows provide operators with an opportunity to win awards for their trucks.

Comparison by country

Showing semi-tractor, large truck, and medium truck by the same manufacturer when possible.

See also

References

  1. "Truck History". About.com. Retrieved 6 September 2008.
  2. "Autocar, Always up, Our History". Autocar, LLC. Retrieved 28 July 2016.
  3. Davies, Peter J. (2000). The World Encyclopedia of Trucks. Lorenz Books. pp. 20–21, 114, 118, 160, 204. ISBN 0-7548-0518-2.
  4. Motor's Truck and Diesel Repair Manual (26 ed.). Motor. 1973. pp. 530, 1035. ISBN 0-910992-16-9.
  5. "Truck" Merriam-Webster Dictionary
  6. "Truck" Online Etymology Dictionary 16 September 2010
  7. "Lorry" Online Etymology Dictionary 16 September 2010
  8. "Lorry" Merriam-Webster Dictionary
  9. "The First Ute". ABC – Radio Australia. Retrieved 15 June 2012.
  10. 49CFR571
  11. http://www.best-used-tractors.com/mini_truck.html
  12. "Chapter 3. HEAVY TRUCKS – Center for Transportation" (PDF) cta.ornl.gov 20 August 2015
  13. "An ALMA Antenna on the Move". ESO Picture of the Week. Retrieved 16 July 2012.
  14. 1 2 "Heavy Vehicle (Mass, Dimension and loading) National Regulation Schedule 1 (NSW)". New South Wales Government. Retrieved 5 August 2016.
  15. 1 2 "Heavy Vehicle (Mass, Dimension and loading) National Regulation Schedule 6 (NSW)". New South Wales Government. Retrieved 5 August 2016.
  16. 1 2 "Council Directive 96/53/EC laying down for certain road vehicles circulating within the Community the maximum authorized dimensions in national and international traffic and the maximum authorized weights in international traffic". EUR-Lex. Retrieved 5 August 2016.
  17. "Freight Management and Operations: Bridge Formula Weights". US Department of Transportation. 21 May 2015. Retrieved 26 May 2015.
  18. Harborn, Mats; Feng, Feng; Xu, Tommy (2013). "Chinese Road Transport Mass and Dimensions Regulations – An Analysis of the Challenges Ahead". road-transport-technology.org. Retrieved 6 August 2016.
  19. "Guidelines on Maximum Weights and Dimensions" (PDF). Ireland Road Safety Authority. February 2013. Retrieved 26 June 2014.
  20. "Moving goods by road". HM (UK) Revenue & Customs. 5 April 2016. Retrieved 5 August 2016.
  21. "A Guide to Haulage & Courier Vehicle Types & Weights" (PDF). Returnloads.net. Retrieved 5 August 2016.
  22. "Federal Size Regulations for Commercial Motor Vehicles". US Department of Transportation. Retrieved 5 August 2016.
  23. "Compilation of Exixting State Truck Size and Weight Limit Laws". US Department of Transportation. May 2015. Retrieved 7 August 2016.
  24. Davies (2000), pp. 58–61.
  25. Bernstein, Adam (29 January 2008). "Viktor Schreckengost; Designed Bicycles, Dinnerware and More". The Washington Post. Retrieved 26 May 2010.
  26. Operators Handbook-DM, DMM, U Series. Mack Trucks. 1988. pp. 62–64.
  27. Davies (2000), pp. 30–31.
  28. "Concrete Mixers (company site)". McNeilus. 2016. Retrieved 24 September 2016.
  29. "Truck Mixers Summary (Sales Brocure)" (PDF). Stetter. 2016. Retrieved 24 September 2016.
  30. Davies (2000), pp. 34–35.
  31. "Dump Truck Operator Manual" (PDF). Galion-Godwin Truck Body Co. Retrieved 13 September 2016.
  32. Davies (2000), pp. 28–29.
  33. Davies (2000), pp. 32–33.
  34. Davies (2000), pp. 46–47.
  35. "HDR 70/85 Wrecker Operations and Maintenance Manual" (PDF). Jerr-Dan. 2010. Retrieved 13 September 2016.
  36. "Owner's Manual 820 Wrecker/FIIIT" (PDF). Miller Industries. 1997. Retrieved 13 September 2016.
  37. "Annual and Sustainability Report 2015" (PDF). Volvo. 2016. p. 76. Retrieved 25 September 2016.
  38. "Annual Report 2015". Daimler. 2016. Retrieved 25 September 2016.
  39. "Form 10K Navistar International Corp.". US Securities and Exchange Commission. 2016. p. 48. Retrieved 24 Sep 2016.
  40. "2015 Annual Report" (PDF). Dongfeng. 2016. p. 10. Retrieved 25 September 2016.
  41. "70th Annual Report 2015-2015" (PDF). Tata. 2016. p. 53. Retrieved 24 Sep 2016.
  42. "Annual Report 2015" (PDF). Volkswagen. 2016. p. 98. Retrieved 25 September 2016.
  43. "Financial Reports for the Fiscal Year Ending" (PDF). Hino Motors. 2016. p. 25. Retrieved 25 September 2016.
  44. "2015 Annual Report" (PDF). PACCAR. 2016. p. 28. Retrieved 25 September 2016.
  45. "2015 Annual Report" (PDF). CNH. 2016. p. 60. Retrieved 23 October 2016.
  46. "South Australia License class information". Gov't of South Australia. Retrieved 28 July 2016.
  47. "Indian Truckers Strike to Protest Against Fuel Price Hike". Deutsche Welle. 2 July 2008.
  48. "Commercial Drivers License". National Highway Traffic Safety Administration. Retrieved 21 May 2008.
  49. "Hours of Service Rules". US Federal Motor Carrier Safety Administration. 18 December 2014. Retrieved 26 May 2015.
  50. "Truck Drivers and Drivers/Sales Workers". Occupational Outlook Handbook. Bureau of Labor Statistics, U.S. Department of Labor. 18 December 2007. Retrieved 25 January 2008.
  51. "Heavy-Duty Truck and Bus Engines". dieselnet.com. Retrieved 6 September 2008.
  52. Average In-Use Emissions from Heavy-Duty Trucks (PDF), page 4–5. EPA, 2008
  53. C. Michael Hogan (1973). "Analysis of highway noise". Springer Science+Business Media. pp. 387–392. doi:10.1007/BF00159677.
  54. "U.S. Carbon Dioxide Emissions from Energy Use by Sector". United States Department of Transportation. Retrieved 6 September 2008.
  55. "Trends in Greenhouse Gas Emissions" (PDF). United States Environmental Protection Agency. Archived from the original (PDF) on 18 July 2008. Retrieved 6 September 2008.
  56. "Energy Intensity Indicators". United States Department of Energy. Retrieved 6 September 2008.
  57. "U.S. Domestic Freight Transportation". United States Department of Energy. Retrieved 6 September 2008.
  58. "How Government policy can realize rail freight's role in reducing carbon emissions". FreightOnRail.org.uk. Retrieved 6 September 2008.
  59. MEPs push for green tolls Last retrieved 11-02-09
  60. European Parliament discuss Eurovignette scheme Last retrieved 10-02-09
  61. "Trucking Industry Operating Taxes State of Georgia". Retrieved 18 August 2006.
  62. "Road wear from heavy vehicles – an overview" (PDF). NVF committee Vehicles and Transports. August 2008. Retrieved 27 September 2016.
  63. "Shropshire Truck Show". shropshiretruckshow. Retrieved 20 August 2015.
Wikimedia Commons has media related to Truck.


This article is issued from Wikipedia - version of the 11/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.