Thermodynamic versus kinetic reaction control

A Generalised energy profile diagram for kinetic versus thermodynamic product reaction.
Energy profile diagram for kinetic versus thermodynamic product reaction.

Thermodynamic reaction control or kinetic reaction control in a chemical reaction can decide the composition in a reaction product mixture when competing pathways lead to different products and the reaction conditions influence the selectivity or stereoselectivity. The distinction is relevant when product A forms faster than product B because the activation energy for product A is lower than that for product B, yet product B is more stable. In such a case A is the kinetic product and is favoured under kinetic control and B is the thermodynamic product and is favoured under thermodynamic control.[1][2][3]

The conditions of the reaction, such as temperature, pressure, or solvent, affect which reaction pathway may be favored: either the kinetically controlled or the thermodynamically controlled one. Note this is only true if the activation energy of the two pathways differ, with one pathway having a lower Ea (energy of activation) than the other.

Prevalence of thermodynamic or kinetic control determines the final composition of the product when these competing reaction pathways lead to different products. The reaction conditions as mentioned above influence the selectivity of the reaction - i.e., which pathway is taken.

Scope

In Diels-Alder reactions

The Diels-Alder reaction of cyclopentadiene with furan can produce two isomeric products. At room temperature, kinetic reaction control prevails and the less stable endo isomer 2 is the main reaction product. At 81 °C and after long reaction times, the chemical equilibrium can assert itself and the thermodynamically more stable exo isomer 1 is formed. The exo product is more stable by virtue of a lower degree of steric congestion, while the endo product is favoured by orbital overlap in the transition state.

In enolate chemistry

In the protonation of an enolate ion, the kinetic product is the enol and the thermodynamic product is a ketone or aldehyde. Carbonyl compounds and their enols interchange rapidly by proton transfers catalyzed by acids or bases, even in trace amounts, in this case mediated by the enolate or the proton source.

In the deprotonation of an unsymmetrical ketone, the kinetic product is the enolate resulting from removal of the most accessible α-H while the thermodynamic product has the more highly substituted enolate moiety.[4][5][6][7] Use of low temperatures and sterically demanding bases increases the kinetic selectivity. Here, the difference in pKb between the base and the enolate is so large that the reaction is essentially irreversible, so the equilibration leading to the thermodynamic product is likely a proton exchange occurring during the addition between the kinetic enolate and as-yet-unreacted ketone. An inverse addition (adding ketone to the base) with rapid mixing would minimize this. The position of the equilibrium will depend on the countercation and solvent.

If a much weaker base is used, the deprotonation will be incomplete, and there will be an equilibrium between reactants and products. Thermodynamic control is obtained, however the reaction remains incomplete unless the product enolate is trapped, as in the example below. Since H transfers are very fast, the trapping reaction being slower, the ratio of trapped products largely mirrors the deprotonation equilibrium.

In electrophilic additions

The electrophilic addition reaction of hydrogen bromide to 1,3-butadiene above room temperature leads predominantly to the thermodynamically more stable 1,4 adduct, 1-bromo-2-butene, but decreasing the reaction temperature to below room temperature favours the kinetic 1,2 adduct, 3-bromo-1-butene.[8]

The rationale for the differing selectivities is as follows: Both products result from Markovnikov protonation at position 1, resulting in a resonance-stabilized allylic cation. The 1,4 adduct places the larger Br atom at a less congested site and includes a more highly substituted alkene moiety, while the 1,2 adduct is the result of the attack by the nucleophile (Br) at the carbon of the allylic cation bearing the greatest positive charge (the more highly substituted carbon is the most likely place for the positive charge).

Characteristics

    (equation 1)
Unless equilibration is prevented, pure kinetic control is practically impossible, because equilibration will have started before the reactants will have been entirely consumed.
    (equation 2)

History

The first to report on the relationship between kinetic and thermodynamic control were R.B. Woodward and Harold Baer in 1944.[14] They were re-investigating a reaction between maleic anhydride and a fulvene first reported in 1929 by Otto Diels and Kurt Alder.[15] They observed that while the endo isomer is formed more rapidly, longer reaction times, as well as relatively elevated temperatures, result in higher exo / endo ratios which had to be considered in the light of the remarkable stability of the exo-compound on the one hand and the very facile dissociation of the endo isomer on the other.

C. K. Ingold with E. D. Hughes and G. Catchpole independently described a thermodynamic and kinetic reaction control model in 1948.[16] They were reinvestigating a certain allylic rearrangement reported in 1930 by Jakob Meisenheimer.[17] Solvolysis of gamma-phenylallyl chloride with AcOK in acetic acid was found to give a mixture of the gamma and the alpha acetate with the latter converting to the first by equilibration. This was interpreted as a case in the field of anionotropy of the phenomenon, familiar in prototropy, of the distinction between kinetic and thermodynamic control in ion-recombination.

References

  1. Organic Chemistry, 3rd ed., M. A. Fox & J. K. Whitesell, Jones & Bartlett, 2004 ISBN 0-7637-2197-2
  2. A Guidebook to Mechanism in Organic Chemistry, 6th Edition, Peter Sykes, Pearson Prentice Hall, 1986. ISBN 0-582-44695-3
  3. Introduction to Organic Chemistry I, Seth Robert Elsheimer, Blackwell Publishing, 2000 ISBN 0-632-04417-9
  4. Thermodynamic Product vs Kinetic Product
  5. Jean d'Angelo, Tetrahedron report number 25 : Ketone enolates: regiospecific preparation and synthetic uses, Tetrahedron, Volume 32, Issue 24, 1976, Pages 2979-2990, ISSN 0040-4020, doi:10.1016/0040-4020(76)80156-1
  6. The Chemistry of Carbanions. IX. The Potassium and Lithium Enolates Derived from Cyclic Ketones Herbert O. House, Barry M. Trost J. Org. Chem., 1965, 30 (5), pp 1341–1348 doi:10.1021/jo01016a001
  7. Chemistry of carbanions. XV. Stereochemistry of alkylation of 4-tert-butylcyclohexanone Herbert O. House, Ben A. Tefertiller, Hugh D. Olmstead J. Org. Chem., 1968, 33 (3), pp 935–942 doi:10.1021/jo01267a002
  8. Introduction to Organic Chemistry I Seth Robert Elsheimer 2000
  9. Only if a subsequent equilibration is as fast or faster is this not true.
  10. Unless one is content with an incomplete reaction, whence a separation of product from unreacted starting material may be necessary.
  11. At worst, Keq will approach 1 as T rises and the proportion of the most stable product will tend toward 50% of the reaction mixture.
  12. will be temperature-independent or nearly so if is small, which would be the case if the rate-determining steps leading to each product were of the same molecularity, for instance if both involved collisions with the same reactant.
  13. will be temperature-independent or nearly so if is small, which would be the case if the overall transformations to each product were of the same molecularity, for instance if both were fragmentations of a molecule to produce a pair of molecules or if both were condensations of two molecules to give a single molecule.
  14. Studies on Diene-addition Reactions. II.1 The Reaction of 6,6-Pentamethylenefulvene with Maleic Anhydride R. B. Woodward, Harold Baer J. Am. Chem. Soc., 1944, 66 (4), pp 645–649 doi:10.1021/ja01232a042
  15. Diels, O. and Alder, K. (1929), Synthesen in der hydroaromatischen Reihe, IV. Mitteilung: Über die Anlagerung von Maleinsäure-anhydrid an arylierte Diene, Triene und Fulvene (Mitbearbeitet von Paul Pries). Berichte der deutschen chemischen Gesellschaft (A and B Series), 62: 2081–2087. doi:10.1002/cber.19290620829
  16. Rearrangement and substitution in anionotropic systems. Part III. Mechanism of, and equilibrium in, anionotropic change A. G. Catchpole, E. D. Hughes and C. K. Ingold J. Chem. Soc., 1948, 8-17 doi:10.1039/JR9480000008
  17. Meisenheimer, J. and Link, J. (1930), Über die Verschiebung in der Allyl-Gruppe. 3. Mitteilung über Substitution und Addition. Justus Liebigs Annalen der Chemie, 479: 211–277. doi:10.1002/jlac.19304790114
This article is issued from Wikipedia - version of the 5/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.