# Strain rate tensor

In continuum mechanics, the **strain rate tensor** is a physical quantity that describes the rate of change of the deformation of a material in the neighborhood of a certain point, at a certain moment of time. It can be defined as the derivative of the strain tensor with respect to time, or as the symmetric component of the gradient (derivative with respect to position) of the flow velocity.

The strain rate tensor is a purely kinematic concept that describes the macroscopic motion of the material. Therefore, it does not depend on the nature of the material, or on the forces and stresses that may be acting on it; and it applies to any continuous medium, whether solid, liquid or gas.

On the other hand, for any fluid except superfluids, any gradual change in its deformation (i.e. a non-zero strain rate tensor) gives rise to viscous forces in its interior, due to friction between adjacent fluid elements, that tend to oppose that change. At any point in the fluid, these stresses can be described by a viscous stress tensor that is, almost always, completely determined by the strain rate tensor and by certain intrinsic properties of the fluid at that point. Viscous stress also occur in solids, in addition to the elastic stress observed in static deformation; when it is too large to be ignored, the material is said to be viscoelastic.

## Definition

Consider a material body, solid or fluid, that is flowing and/or moving in space. Let **v** be the velocity field within the body; that is, a smooth function from ℝ^{3} × ℝ such that **v**(**p**,*t*) is the macroscopic velocity of the material that is passing through the point **p** at time t.

The velocity **v**(**p** + **r**,*t*) at a point displaced from **p** by a small vector **r** can be written as a Taylor series:

where ∇**v** the gradient of the velocity field, understood as a linear map that takes a displacement vector **r** to the corresponding change in the velocity.

In an arbitrary reference frame, ∇**v** is related to the Jacobian matrix of the field, namely in 3 dimensions it is the 3 × 3 matrix

where v_{i} is the component of **v** parallel to axis i and ∂* _{j}f* denotes the partial derivative of a function f with respect to the space coordinate x

_{j}. Note that

**J**is a function of

**p**and t.

In this coordinate system, the Taylor approximation for the velocity near **p** is

or simply

if **v** and **r** are viewed as 3 × 1 matrices.

### Symmetric and antisymmetric parts

Any matrix can be decomposed into the sum of a symmetric matrix and an antisymmetric matrix. Applying this to the Jacobian matrix **J** = (∇**v**)^{T} with symmetric and antisymmetric components **E** and **R** respectively:

That is,

This decomposition is independent of coordinate system, and so has physical significance. Then the velocity field may be approximated as

that is,

The antisymmetric term **R** represents a rigid-like rotation of the fluid about the point **p**. Its angular velocity ω is

The product ∇ × **v** is called the *rotational curl* of the vector field. A rigid rotation does not change the relative positions of the fluid elements, so the antisymmetric term **R** of the velocity gradient does not contribute to the rate of change of the deformation. The actual strain rate is therefore described by the symmetric **E** term, which is the **strain rate tensor**.

### Shear rate and compression rate

The symmetric term **E** of velocity gradient (the rate-of-strain tensor) can be broken down further as the sum of a scalar times the unit tensor, that represents a gradual isotropic expansion or contraction; and a traceless symmetric tensor which represents a gradual shearing deformation, with no change in volume:^{[1]}

That is,

Here **δ** is the unit tensor, such that δ_{ij} is 1 if *i* = *j* and 0 if *i* ≠ *j*. This decomposition is independent of the choice of coordinate system, and is therefore physically significant.

The expansion rate tensor is 1/3 of the divergence of the velocity field:

which is the rate at which the volume of a fixed amount of fluid increases at that point.

The shear rate tensor is represented by a symmetric 3 × 3 matrix, and describes a flow that combines compression and expansion flows along three orthogonal axes, such that there is no change in volume. This type of flow occurs, for example, when a rubber strip is stretched by pulling at the ends, or when honey falls from a spoon as a smooth unbroken stream.

For a two-dimensional flow, the divergence of **v** has only two terms and quantifies the change in area rather than volume. The factor 1/3 in the expansion rate term should be replaced by 1/2 in that case.