Solvothermal synthesis

Schematic diagram of solvothermal synthesis setup: (1) stainless steel autoclave (2) precursor solution (3) Teflon liner (4) stainless steel lid (5)

Solvothermal synthesis is a method of producing chemical compounds. It is very similar to the hydrothermal route (where the synthesis is conducted in a stainless steel autoclave), the only difference being that the precursor solution is usually not aqueous (however, this is not always the case in all literature uses of the expression). Using the solvothermal route gains one the benefits of both the sol-gel[1] and hydrothermal routes.[2] Thus solvothermal synthesis allows for the precise control over the size, shape distribution, and crystallinity of metaloxide nanoparticles or nanostructures. These characteristics can be altered by changing certain experimental parameters, including reaction temperature, reaction time, solvent type, surfactant type, and precursor type.

Solvothermal synthesis has been used in laboratory to make nanostructured titanium dioxide,[3] graphene,[4] carbon[5] and other materials.


References

  1. Oliveira, Marcela M.; Schnitzler, Danielle C.; Zarbin, Aldo J. G. (2003). "(Ti,Sn)O2Mixed Oxides Nanoparticles Obtained by the Sol−Gel Route". Chemistry of Materials. 15 (9): 1903–1909. doi:10.1021/cm0210344.
  2. Andersson, Martin; Österlund, Lars; Ljungström, Sten; Palmqvist, Anders (2002). "Preparation of Nanosize Anatase and Rutile TiO2 by Hydrothermal Treatment of Microemulsions and Their Activity for Photocatalytic Wet Oxidation of Phenol". The Journal of Physical Chemistry B. 106 (41): 10674–10679. doi:10.1021/jp025715y.
  3. Xie, Rong-Cai; Shang, Jian Ku (2007). "Morphological control in solvothermal synthesis of titanium oxide". Journal of Materials Science. 42 (16): 6583–6589. Bibcode:2007JMatS..42.6583X. doi:10.1007/s10853-007-1506-0.
  4. Choucair, Mohammad; Thordarson, Pall; Stride, John A. (2008). "Gram-scale production of graphene based on solvothermal synthesis and sonication". Nature Nanotechnology. 4 (1): 30–3. Bibcode:2009NatNa...4...30C. doi:10.1038/nnano.2008.365. PMID 19119279.
  5. Hu, Gang; Ma, Ding; Cheng, Mojie; Liu, Lin; Bao, Xinhe (2002). "Direct synthesis of uniform hollow carbon spheres by a self-assembly template approachElectronic supplementary information (ESI) available: SEM pictures of the products from simple mixing. See http://www.rsc.org/suppdata/cc/b2/b205723a/". Chemical Communications (17): 1948–1949. doi:10.1039/B205723A. External link in |title= (help)
This article is issued from Wikipedia - version of the 10/12/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.