Resorcinol

Resorcinol
Names
IUPAC name
Benzene-1,3-diol
Other names
Resorcin
m-dihydroxybenzene; 1,3-benzenediol; 1,3-Dihydroxybenzene; 3-Hydroxyphenol; m-hydroquinone; m-benzenediol
Identifiers
108-46-3 YesY
3D model (Jmol) Interactive image
ChEBI CHEBI:27810 N
ChEMBL ChEMBL24147 YesY
ChemSpider 4878 YesY
ECHA InfoCard 100.003.260
KEGG D00133 YesY
PubChem 5054
UNII YUL4LO94HK YesY
UN number 2876
Properties
C6H6O2
Molar mass 110.1 g/mol
Appearance White solid, turns pink on exposure to air, light, and iron[1]
Odor Faint[1]
Density 1.28 g/cm3, solid
Melting point 110 °C (230 °F; 383 K)
Boiling point 277 °C (531 °F; 550 K)
110 g/100 mL at 20 °C
Vapor pressure 0.0002 mmHg (25°C)[1]
Acidity (pKa) 9.15[2]
2.07±0.02 D [3]
Pharmacology
D10AX02 (WHO) S01AX06 (WHO)
Hazards
Harmful (Xn)
Dangerous for
the environment (N)
Flash point 127 °C; 261 °F; 400 K [1]
Explosive limits 1.4%-?[1]
US health exposure limits (NIOSH):
PEL (Permissible)
none[1]
REL (Recommended)
TWA 10 ppm (45 mg/m3) ST 20 ppm (90 mg/m3)[1]
IDLH (Immediate danger)
N.D.[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Resorcinol (or resorcin) is a benzenediol (m-dihydroxybenzene).

Chemistry

It is the 1,3-isomer (or meta-isomer) of benzenediol with the formula C6H4(OH)2. Austrian chemist Heinrich Hlasiwetz (1825–1875) is remembered for his chemical analysis of resorcinol and for his part in the first preparation of resorcinol, along with Ludwig Barth, which was published in 1864.[4]:10[5][6]

Nomenclature

Benzene-1,3-diol is the name recommended by the International Union of Pure and Applied Chemistry (IUPAC) in its 1993 Recommendations for the Nomenclature of Organic Chemistry.[7]

Production

It is produced when any of a large number of resins (e.g., galbanum, asafoetida, etc.) are melted with potassium hydroxide, or by the distillation of Brazilwood extract. It may be prepared synthetically by melting 3-iodophenol, phenol-3-sulfonic acid, or benzene-1,3-disulfonic acid with potassium carbonate; by the action of nitrous acid on 3-aminophenol or on 1,3-diaminobenzene.[8] Many ortho- and para-compounds of the aromatic series (for example, the bromophenols, benzene-para-disulfonic acid) also yield resorcinol on fusion with potassium hydroxide.

Properties

Resorcinol crystallizes from benzene as colorless needles that are readily soluble in water, alcohol, and ether, but insoluble in chloroform and carbon disulfide. It reduces Fehling's solution and ammoniacal silver solutions. It does not form a precipitate with lead acetate solution, as does the isomeric pyrocatechol. Iron(III) chloride colors its aqueous solution a dark-violet, and bromine water precipitates tribromoresorcin. These properties are what give it its use as a colouring agent for certain chromatography experiments. Sodium amalgam reduces it to dihydroresorcin, which when heated to 150 to 160 °C with concentrated barium hydroxide solution gives γ-acetylbutyric acid (D. Vorlgnder); when fused with potassium hydroxide, resorcinol yields phloroglucin, pyrocatechol, and diresorcin. It condenses with acids or acid chlorides, in the presence of dehydrating agents, to oxyketones, e.g., with zinc chloride and glacial acetic acid at 145 °C it yields resacetophenone (HO)2C6H3~CO.CH3.[9] With the anhydrides of dibasic acids, it yields fluoresceins. When heated with calcium chlorideammonia to 200 °C it yields meta-dioxydiphenylamine.[10] With sodium nitrite it forms a water-soluble blue dye, which is turned red by acids, and is used as an indicator, under the name of lacmoid.[11] It condenses readily with aldehydes, yielding with formaldehyde, on the addition of catalytic hydrochloric acid, methylene diresorcin [(HO)C6H3(O)]2•CH2. Reaction with chloral hydrate in the presence of potassium bisulfate yields the lactone of tetra-oxydiphenyl methane carboxylic acid.[12] In alcoholic solution it condenses with sodium acetoacetate to form 4-methylumbelliferone.[13]

In addition to electrophilic aromatic addition, resorcinol (and other poly-ols) undergo nucleophilic substitution via the enone form. With concentrated nitric acid, in the presence of cold concentrated sulfuric acid, it yields trinitro-resorcin (styphnic acid), which forms yellow crystals, exploding violently on rapid heating.

Occurrences

Resorcinol is one of the main natural phenols in argan oil.[14]

Presence of the resorcinol moiety

Parts of a molecule of catechin, another natural compound that is present in tea, has the resorcinol skeleton structure in it.

Alkylresorcinols are a marker of whole grain diet. 4-Hexylresorcinol is an anesthetic found in throat losenges.

Applications

Medical

Used externally, it is an antiseptic and disinfectant, and is used 5 to 10% in ointments in the treatment of chronic skin diseases such as psoriasis, hidradenitis suppurativa, and eczema of a sub-acute character. It is present in over-the-counter topical acne treatments at 2% or less concentration, and in prescription treatments at higher concentrations.[15] Weak, watery solutions of resorcinol (25 to 35 g/kg) are useful in allaying the itching in erythematous eczema. A 2% solution used as a spray has been used with marked effect in hay fever and in whooping cough. In the latter disease 0.6 mL of the 2% solution has been given internally. It can be included as an anti-dandruff agent in shampoo or in sunscreen cosmetics. It has also been employed in the treatment of gastric ulcers in doses of 125 to 250 mg in pills, and is said to be analgesic and haemostatic in its action. In large doses, it is a poison, causing giddiness, deafness, salivation, sweating, and convulsions. It is also worked up in certain medicated soaps. Monoacetylresorcinol, C6H4(OH)(O-COCH3), is used under the name of euresol.[16] Resorcinol is one of the active ingredients in products such as Resinol, Vagisil, and Clearasil.

Chemical

Resorcinol is also used as a chemical intermediate for the synthesis of pharmaceuticals and other organic compounds. It is used in the production of diazo dyes and plasticizers and as a UV absorber in resins.

An emerging use of resorcinol is as a template molecule in supramolecular chemistry. The -OH groups on resorcinol form hydrogen bonds to target molecules, holding them in the proper orientation for a reaction. Many such reactions are able to be carried out in the solid state, thereby reducing or eliminating the use of solvents that may be harmful to the environment. (see Green chemistry)

Resorcinol is an analytical reagent for the qualitative determination of ketoses (Seliwanoff's test).

Resorcinol is the starting material for resorcinarene molecules and the initiating explosive lead styphnate.[17]

Resorcinol reacts with formaldehyde to form a thermoset resin which can form the basis of an aerogel.

Resazurin, C12H7NO4, obtained by the action of nitrous acid on resorcinol,[18] forms small dark red crystals possessing a greenish metallic glance. When dissolved in concentrated sulfuric acid and warmed to 210 °C, the solution on pouring into water yields a precipitate of resorufin, C12H7NO3, an oxyphenoxazone, which is insoluble in water, but is readily soluble in hot concentrated hydrochloric acid, and in solutions of caustic alkalis. The alkaline solutions are of a rose-red color and show a cinnabar-red fluorescence. A tetrabromresorufin is used as a dye-stuff under the name of Fluorescent Resorcin Blue.

Thioresorcinol is obtained by the action of zinc and hydrochloric acid on the chloride of benzene meta-disulfonic acid. It melts at 27 °C and boils at 243 °C. Resorcinol disulfonic acid, (HO)2C6H2(HSO3)2, is a deliquescent mass obtained by the action of sulfuric acid on resorcin.[19] It is readily soluble in water and ethanol.

Resorcinol is also a common scaffold that is found in a class of anticancer agents, some of which (luminespib, ganetespib, KW-2478, and onalespib) were in clinical trials as of 2014.[20][21] Part of the resorcinol structure binds to inhibits the N-terminal domain of heat shock protein 90, which is a drug target for anticancer treatments.[20]

See also

References

  1. 1 2 3 4 5 6 7 8 "NIOSH Pocket Guide to Chemical Hazards #0543". National Institute for Occupational Safety and Health (NIOSH).
  2. Gawron, O.; Duggan, M.; Grelechi, C. (1952). "Manometric Determination of Dissociation Constants of Phenols". J. Anal. Chem. 24: 969–970. doi:10.1021/ac60066a013.
  3. Lander, John J.; Svirbely, John J. Lander, W. J. (1945). "The Dipole Moments of Catechol, Resorcinol and Hydroquinone". Journal of the American Chemical Society. 67 (2): 322–324. doi:10.1021/ja01218a051.
  4. Raj B. Durairaj. Resorcinol: Chemistry, Technology and Applications. Springer Science & Business Media, 2005 ISBN 9783540280903
  5. McConnell, Virginia F. (1953). "Hlasiwetz and Barth — Pioneers in the structural aspects of plant products". Journal of Chemical Education. 30 (8): 380. doi:10.1021/ed030p380.
  6. H. Hlasiwetz and L. Barth (1864) "Ueber einen neuen, dem Orcin homologen Körper" (On a new substance homologous to orcin), Annalen der Chemie, 130 (3) : 354-359. Resorcinol is named on p. 358: "Wir nennen den neuen Körper, da wir gefunden haben, dass er auch aus dem Ammoniakgummiharz erhalten werden kann, Resorcin, um an seine Entstehung aus Harzen und seine Beziehung zum Orcin zu erinnern." (We name the new substance, since we've found that it can be obtained from ammoniated resin gum, resorcin, in order to recall its creation from resin and its relation to orcin [i.e., orcinol].)
  7. Panico, R.; & Powell, W. H. (Eds.) (1994). A Guide to IUPAC Nomenclature of Organic Compounds 1992. Oxford: Blackwell Science. ISBN 0-632-03488-2.
  8. Meyer, J (1897). "Notiz über die Umwandlung von Aminen in Phenole". Ber. 30: 2569. doi:10.1002/cber.18970300334.
  9. Nencki, M.; Sieber, N. (1881). "Über die Verbindungen der ein- und zweibasischen Fettsäuren mit Phenolen". Journal für Praktische Chemie. 23: 147–156. doi:10.1002/prac.18810230111.
  10. A. Seyewitz, Bull. Soc. Chins., 1890, 3, p. 811
  11. Traub, M. C.; Hock, C. (1884). "Ueber ein Lakmoid". Berichte der chemischen Gesellschaft. 17: 2615 2616. doi:10.1002/cber.188401702192.
  12. J. T. Hewitt and F. G. Pope, Jour. C/tern. Soc., 1897, 75, p. 1084
  13. Michael, Arthur (1888). "Ueber das Verhalten von Natriummalonäther gegen Resorcinol". Journal für Praktische Chemie. 37: 469–471. doi:10.1002/prac.18880370144.
  14. Phenols and Polyphenols from Argania spinosa. Z. Charrouf and D. Guillaume, American Journal of Food Technology, 2007, 2, pages 679-683, doi:10.3923/ajft.2007.679.683
  15. Boer, J; Jemec, GB (2010). "Resorcinol peels as a possible self-treatment of painful nodules in hidradenitis suppurativa". Clin Exp Dermatol. 35 (1): 36–40. doi:10.1111/j.1365-2230.2009.03377.x. PMID 19549239.
  16. Euresol, PubChem
  17. "Military Explosives," Department of the Army Technical Manual, TM-9-1300-214 (Washington, D.C.: Department of the Army, September 1984), p. 7-12.
  18. Weselsky, P (1871). "Neue Derivate des Resorcins" [New derivatives of resorcinol]. Berichte der deutschen chemischen Gesellschaft. 4: 32–33. doi:10.1002/cber.18710040114.
  19. Piccard, J.; Humbert, A. (1876). "Ueber eine Resorcindisulfosäure" [On a resorcinol disulfonic acid]. Berichte der deutschen chemischen Gesellschaft. 9: 1479–1483. doi:10.1002/cber.187600902133.
  20. 1 2 Sidera, K.; Patsavoudi, E. (Jan 2014). "HSP90 inhibitors: current development and potential in cancer therapy.". Recent Pat. Anticancer Drug Discov. 9 (1): 1–20. doi:10.2174/15748928113089990031. PMID 23312026.
  21. Biamonte, M. A.; Van de Water, R.; Arndt, J. W.; Scannevin, R. H.; Perret, D.; Lee, W.-C. (Jan 2010). "Heat shock protein 90: Inhibitors in clinical trials.". J. Med. Chem. 53 (1): 3–17. doi:10.1021/jm9004708. PMID 20055425.

Public Domain This article incorporates text from a publication now in the public domain: Chisholm, Hugh, ed. (1911). "article name needed". Encyclopædia Britannica (11th ed.). Cambridge University Press. 

This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.