Metallicity

The globular cluster M80. Stars in globular clusters are mainly older metal-poor members of Population II.

In astronomy and physical cosmology, the metallicity or Z is the fraction of mass of a star or other kind of astronomical object that is not in hydrogen (X) or helium (Y).^[1][2] Most of the physical matter in the universe is in the form of hydrogen and helium, so astronomers use the word "metals" as a convenient short term for "all elements except hydrogen and helium".^[3] This usage is distinct from the usual physical definition of a solid metal. The rationale for the astronomical usage is that in the high-temperature and pressure environment of a star, atoms do not undergo chemical reactions and effectively have no chemical properties, including that of being a metal as usually understood. For example, stars and nebulae with relatively high abundances of carbon, nitrogen, oxygen, and neon are called "metal-rich" in astrophysical terms, even though those elements are non-metals in chemistry.

The distinction between hydrogen and helium on the one hand and metals on the other is relevant because the primordial universe is believed to have contained virtually no metals, which were later synthesised within stars.

Metallicity within stars and other astronomical objects is an approximate estimation of their chemical abundances that change over time by the mechanisms of stellar evolution,^[4] and therefore provide an indication of their age.^[5] In cosmological terms, the universe is chemically evolving. According to the Big Bang Theory, the early universe first consisted of hydrogen and helium, with trace amounts of lithium and beryllium, but no heavier elements. Through the process of stellar evolution stars first generate energy by synthesising metals from hydrogen and helium by nuclear reactions, then disperse most of their mass by stellar winds or explode as supernovae, dispersing the new metals into the universe.^[6] It is believed that older generations of stars generally have lower metallicities than those of younger generations,^[7] having been formed in the metal-poor early universe.

Observed changes in the chemical abundances of different types of stars, based on the spectral peculiarities that were later attributed to metallicity, led astronomer Walter Baade in 1944 to propose the existence of two different populations of stars.^[8] These became commonly known as Population I (metal-rich) and Population II (metal-poor) stars. A third stellar population was introduced in 1978, known as Population III stars.^[9][10][11] These extremely metal-poor stars were theorised to have been the 'first-born' stars created in the universe.

Star metallicity and planets

A star's metallicity measurement is one parameter that helps determine if a star will have planets and the type of planets, as there is a direct correlation between metallicity and the type of planets a star may have. Measurements have demonstrated the connection between a star's metallicity and gas giant planets, like Jupiter and Saturn. The more metals in a star and thus its planetary system and proplyd, the more likely the system may have gas giant planets and rocky planets. Current models show that the metallicity along with the correct planetary system temperature and distance from the star are key to planet and planetesimal formation. Metallicity also affects a star's color temperature. Metal poor stars are bluer and metal rich stars are redder. The Sun, with 8 planets and 5 planetesimals, is used as the reference, with a [Fe/H] of 0.00. Other stars are noted with a positive or negative value. A star with a [Fe/H] = 0.0 has the same iron abundance as the Sun. A star with [Fe/H] = −1.0 has one tenth heavy elements of that found in the Sun. At [Fe/H] = +1, the heavy element abundance is 10 times the Sun's value. The survey of stellar population of stars shows that older stars have less metallicity.^{[12][13][14][15][16]}

Definition

Stellar composition, as determined by spectroscopy, is usually simply defined by the parameters X, Y and Z. Here X is the fractional percentage of hydrogen, Y is the fractional percentage of helium, and all the remaining chemical elements as the fractional percentage, Z. It is simply defined as;

In most stars, nebulae and other astronomical sources, hydrogen and helium are the two dominant elements. The hydrogen mass fraction is generally expressed as where is the total mass of the system and the fractional mass of the hydrogen it contains. Similarly, the helium mass fraction is denoted as . The remainder of the elements are collectively referred to as 'metals', and the metallicity—the mass fraction of elements heavier than helium—can be calculated as

For the surface of the Sun, these parameters are measured to have the following values:^[17]

Description	Solar value
Hydrogen mass fraction
Helium mass fraction
Metallicity

It should be noted that due to the effects of stellar evolution, neither the initial composition nor the present day bulk composition of the Sun are the same as its present day surface composition.

The metallicity of many astronomical objects cannot be measured directly. Instead, proxies are used to obtain an indirect estimate. For example, an observer might measure the oxygen content of a galaxy (for example using the brightness of an oxygen emission line) directly, then compare that value with models to estimate the total metallicity.

Calculation

The overall stellar metallicity is often defined using the total iron-content of the star "[Fe/H]": though iron is not the most abundant heavy element (oxygen is), it is among the easiest to measure with spectral data in the visible spectrum. The abundance ratio is defined as the logarithm of the ratio of a star's iron abundance compared to that of the Sun and is expressed thus:

where and are the number of iron and hydrogen atoms per unit of volume respectively. The unit often used for metallicity is the "dex" which is a (now-deprecated) contraction of 'decimal exponent'.^[18] By this formulation, stars with a higher metallicity than the Sun have a positive logarithmic value, whereas those with a lower metallicity than the Sun have a negative value. The logarithm is based on powers of 10; stars with a value of +1 have ten times the metallicity of the Sun (10¹). Conversely, those with a value of −1 have one-tenth (10⁻¹), while those with a value of −2 have a hundredth (10⁻²), and so on.^[3] Young Population I stars have significantly higher iron-to-hydrogen ratios than older Population II stars. Primordial Population III stars are estimated to have a metallicity of less than −6.0, that is, less than a millionth of the abundance of iron in the Sun.

The same sort of notation is used to express differences in the individual elements from the solar proportion. For example, the notation "[O/Fe]" represents the difference in the logarithm of the star's oxygen abundance compared to that of the Sun and the logarithm of the star's iron abundance compared to the Sun:

The point of this notation is that if a mass of gas is diluted with pure hydrogen, then its [Fe/H] value will decrease (because there are fewer iron atoms per hydrogen atom after the dilution), but for all other elements X, the [X/Fe] ratios will remain unchanged. By contrast, if a mass of gas is polluted with some amount of oxygen, then its [Fe/H] will remain unchanged but its [O/Fe] ratio will increase. In general, a given stellar nucleosynthetic process alters the proportions of only a few elements or isotopes, so a star or gas sample with nonzero [X/Fe] values may be showing the signature of particular nuclear processes.

Relation between Z and [Fe/H]

These two ways of expressing the metallic content of a star are related through the equation

where [M/H] is the star's total metal abundance (i.e. all elements heavier than helium) defined as a more general expression than the one for [Fe/H]:

The iron abundance and the total metal abundance are often assumed to be related through a constant A as:

where A assumes values between 0.9 and 1. Using the formulas presented above, the relation between Z and [Fe/H] can finally be written as:

See also

References

• Salvaterra, R.; Ferrara, A.; Schneider, R. (2004). "Induced formation of primordial low-mass stars". New Astronomy. 10 (2): 113–120. arXiv:astro-ph/0304074. Bibcode:2004NewA...10..113S. doi:10.1016/j.newast.2004.06.003. 
• A. Heger; S. E. Woosley (2002). "The Nucleosynthetic Signature of Population III". Astrophysical Journal. 567 (1): 532–543. arXiv:astro-ph/0107037. Bibcode:2002ApJ...567..532H. doi:10.1086/338487. 

Sources

• Page 593-In Quest of the Universe Fourth Edition Karl F. Kuhn Theo Koupelis. Jones and Bartlett Publishers Canada. 2004. ISBN 0-7637-0810-0
• Bromm, Volker; Larson, Richard B. (2004). "THE FIRST STARS". Annual Review of Astronomy and Astrophysics. 42: 79–118. arXiv:astro-ph/0311019. Bibcode:2004ARA&A..42...79B. doi:10.1146/annurev.astro.42.053102.134034. 

Star
Evolution	Formation Pre-main-sequence star Main sequence Red giant branch Horizontal branch Asymptotic giant branch Dredge-up Instability strip Red clump PG1159 star Mira variable Planetary nebula Protoplanetary nebula Luminous red nova Luminous blue variable Wolf–Rayet star Stellar population Supernova Supernova impostor Hypernova Hertzsprung–Russell diagram Color–color diagram
Protostars	Molecular cloud H II region Bok globule Young stellar object Herbig–Haro object Hayashi track Henyey track Orion T Tauri FU Orionis Herbig Ae/Be
Luminosity class	Subdwarf Dwarf Blue Red White Yellow Black Brown Subgiant Giant Blue Red Bright giant Supergiant Blue Red Yellow Hypergiant Yellow Blue straggler Variable star
Spectral classification	O B A F G K M Be OB Subdwarf O Subdwarf B Late-type Chemically peculiar Am Ap/Bp Oscillating Barium Carbon CH CN Extreme helium Lambda Boötis Lead Mercury-manganese S Shell Technetium
Remnants	White dwarf Black dwarf Helium planet Neutron star Pulsar Binary X-ray X-ray binary X-ray burster Magnetar Stellar black hole Compact star Quark Strange Preon Planck Exotic Stellar core: EF Eridani B
Theoretical stars	Dark-matter star Dark-energy star Black star Gravastar Frozen star Q star Quasi-star Thorne–Żytkow object Iron star Blitzar
Nucleosynthesis	Deuterium burning Lithium burning Proton–proton chain CNO cycle Helium flash Triple-alpha process Carbon burning Neon burning Oxygen burning Alpha process Silicon burning S-process R-process Fusor Nova Remnants
Structure	Core Convection zone Microturbulence Oscillations Radiation zone Atmosphere Photosphere Starspot Chromosphere Corona Stellar wind Bubble Asteroseismology Eddington luminosity Kelvin–Helmholtz mechanism
Properties	Designation Dynamics Effective temperature Kinematics Magnetic field Magnitude Absolute Mass Metallicity Rotation UBV color Variability
Star systems	Binary Contact Common envelope Multiple Accretion disk Star cluster Open cluster Globular cluster Super star cluster Planetary system Earth's Solar System
Earth-centric observation of	Pole star Circumpolar star Magnitude Apparent Extinction Photographic Color Radial velocity Proper motion Parallax Photometric-standard star
Lists	Star names Arabic Chinese Extremes Most massive Highest temperature Largest volume Smallest volume Brightest Historical Most luminous Nearest Nearest bright Stars with exoplanets Brown dwarfs White dwarfs Milky Way novae Notable supernovae Supernova candidates Supernova remnants Planetary nebulae Timeline of stellar astronomy
Related articles	Substellar object Brown dwarf Sub-brown dwarf Planet Galactic year Galaxy Supercluster Helioseismology Guest star Constellation Asterism Gravity Intergalactic star Infrared dark cloud Starfield
Category:Stars · Star portal