Organomercury

Organomercury compounds contain at least one carbon bonded to a mercury atom, shown here.

Organomercury refers to the group of organometallic compounds that contain mercury. Typically the Hg–C bond is stable toward air and moisture but sensitive to light. Important organomercury compounds are the methylmercury cation, CH3Hg+; ethylmercury cation, C2H5Hg+; dimethylmercury, (CH3)2Hg, diethylmercury, and merbromin ("Mercurochrome"). Thiomersal is used as a preservative for vaccines and intravenous drugs.

The toxicity of organomercury compounds[1][2] presents both dangers and benefits. Dimethylmercury in particular, is notoriously toxic, but has found use as an antifungal agent and insecticide. Merbromin and phenylmercuric borate are used as topical antiseptics, while Nitromersol is used as a preservative for vaccines and antitoxins.

Synthesis

Organomercury compounds are generated by many methods, including the direct reaction of hydrocarbons and mercury(II) salts. In this regard, organomercury chemistry more closely resembles organopalladium chemistry and contrasts with organocadmium compounds.

Mercuration of aromatic ring

Electron-rich arenes undergo direct mercuration upon treatment with Hg(O2CCH3)2. The one acetate group that remains on mercury can be displaced by chloride:[3]

C6H5OH + Hg(O2CCH3)2 C6H4(OH)–2-HgO2CCH3 + CH3CO2H
C6H4(OH)–2–HgO2CCH3 + NaCl C6H4(OH)–2-HgCl + NaO2CCH3

The first such reaction, including a mercuration of benzene itself was reported by Otto Dimroth between 1898 and 1902.[4][5][6]

Addition to alkenes

The Hg2+ center binds to alkenes, inducing the addition of hydroxide and alkoxide. For example, treatment of methyl acrylate with mercuric acetate in methanol gives an α--mercuri ester:[7]

Hg(O2CCH3)2 + CH2=CHCO2CH3 CH3OCH2CH(HgO2CCH3)CO2CH3

The resulting Hg-C bond can be cleaved with bromine to give the corresponding alkyl bromide:

CH3OCH2CH(HgO2CCH3)CO2CH3 + Br2 CH3OCH2CHBrCO2CH3 + BrHgO2CCH3

This reaction is called the Hofmann-Sand Reaction.[8]

Reaction of Hg(II) compounds with carbanion equivalents

A general synthetic route to organomercury compounds entails alkylation with Grignard reagents and organolithium compounds. Diethylmercury results from the reaction of mercury chloride with two equivalents of ethylmagnesium bromide, a conversion that would typically be conducted in diethyl ether solution.[9] The resulting (CH3CH2)2Hg is a dense liquid (2.466 g/cm3) that boils at 57 °C at 16 torr. The compound is slightly soluble in ethanol and soluble in ether.

Similarly, diphenylmercury (m.p. 121–123 °C) can be prepared by reaction of mercury chloride and phenylmagnesium bromide. A related preparation entails formation of phenylsodium in the presence of mercury(II) salts.[10]

Other methods

Hg(II) can be alkylated by treatment with diazonium salts in the presence of copper metal. In this way 2-chloromercuri-naphthalene has been prepared.[11]

Phenyl(trichloromethyl)mercury compounds can be prepared by generating dichlorocarbene in the presence of phenylmercuric chloride. A convenient carbene source is sodium trichloroacetate.[12] This compound on heating releases dichlorocarbene:

C6H5HgCCl3 C6H5HgCl + CCl2

Reactions

Organomercury compounds are versatile synthetic intermediates due to the well controlled conditions under which they undergo cleavage of the Hg-C bonds. Diphenylmercury is a source of the phenyl radical in certain syntheses. Treatment with aluminium gives triphenyl aluminium:

3 Ph2Hg + 2 Al (AlPh3)2 + 3 Hg

As indicated above, organomercury compounds react with halogens to give the corresponding organic halide. Organomercurials are commonly used in transmetalation reactions with lanthanides and alkaline-earth metals.

Cross coupling of organomercurials with organic halides is catalyzed by palladium, which provides a method for C-C bond formation. Usually of low selectivity, but if done in the presence of halides, selectivity increases. Carbonylation of lactones has been shown to employ Hg(II) reagents under palladium catalyzed conditions. (C-C bond formation and Cis ester formation).[13]

Applications

Due to their toxicity and low nucleophilicity, organomercury compounds find limited use. The oxymercuration reaction of alkenes to alcohols using mercuric acetate proceeds via organomercury intermediates. A related reaction forming phenols is the Wolfenstein-Boters reaction. The toxicity is useful in antiseptics such as thiomersal and merbromin, and fungicides such as ethylmercury chloride and phenylmercury acetate.

Mercurial diuretics such as mersalyl acid were once in common use, but have been superseded by the thiazides and loop diuretics, which are safer and longer-acting, as well as being orally active.

Thiol affinity chromatography

Thiols are also known as mercaptans due to their propensity for mercury capture. Thiolates (R-S) and thioketones (R2-C=S) being soft nucleophiles form a strong coordination complex with mercury(II), a soft electrophile.[14] As a result, organomercurial agarose gel or gel beads are used to isolate thiolated compounds (such as thiouridine) in a biological sample.[15]

See also

CH He
CLi CBe CB CC CN CO CF Ne
CNa CMg CAl CSi CP CS CCl CAr
CK CCa CSc CTi CV CCr CMn CFe CCo CNi CCu CZn CGa CGe CAs CSe CBr CKr
CRb CSr CY CZr CNb CMo CTc CRu CRh CPd CAg CCd CIn CSn CSb CTe CI CXe
CCs CBa CHf CTa CW CRe COs CIr CPt CAu CHg CTl CPb CBi CPo CAt Rn
Fr CRa Rf Db CSg Bh Hs Mt Ds Rg Cn Nh Fl Mc Lv Ts Og
CLa CCe CPr CNd CPm CSm CEu CGd CTb CDy CHo CEr CTm CYb CLu
Ac CTh CPa CU CNp CPu CAm CCm CBk CCf CEs Fm Md No Lr
Chemical bonds to carbon
Core organic chemistry Many uses in chemistry
Academic research, but no widespread use Bond unknown

References

  1. Hintermann, H. (2010). Organomercurials. Their Formation and Pathways in the Environment. Metal Ions in Life Sciences. 7. Cambridge: RSC publishing. pp. 365–401. ISBN 978-1-84755-177-1.
  2. Aschner, M.; Onishchenko, N.; Ceccatelli, S. (2010). Toxicology of Alkylmercury Compounds. Metal Ions in Life Sciences. 7. Cambridge: RSC publishing. pp. 403–434. ISBN 978-1-84755-177-1.
  3. Whitmore, F. C.; Hanson, E. R. (1941). "o-Chloromercuriphenol". Org. Synth.; Coll. Vol., 1, p. 161
  4. Otto Dimroth (1898). "Directe Einführung von Quecksilber in aromatische Verbindungen". Berichte der deutschen chemischen Gesellschaft. 31 (2): 2154–2156. doi:10.1002/cber.189803102162.
  5. Otto Dimroth (1899). "Ueber die Einwirkung von Quecksilberoxydsalzen auf aromatische Verbindungen". Berichte der deutschen chemischen Gesellschaft. 32 (1): 758–765. doi:10.1002/cber.189903201116.
  6. Otto Dimroth (1902). "Ueber die Mercurirung aromatischer Verbindungen". Berichte der deutschen chemischen Gesellschaft. 35 (2): 2032–2045. doi:10.1002/cber.190203502154.
  7. Carter, H. E.; West, H. D. (1955). "dl-Serine". Org. Synth.; Coll. Vol., 3, p. 774
  8. K. A. Hofmann; J. Sand (1900). "Ueber das Verhalten von Mercurisalzen gegen Olefine". Berichte der deutschen chemischen Gesellschaft. 33 (1): 1340–1353. doi:10.1002/cber.190003301231.
  9. W.A. Herrmann (ed.). Synthetic Methods of Organometallic and Inorganic Chemistry Volume 5, Copper, Silver, Gold, Zinc, Cadmium, and Mercury. ISBN 3-13-103061-5.
  10. Calvery, H. O. (1941). "Diphenylmercury". Org. Synth.; Coll. Vol., 1, p. 228
  11. Nesmajanow, A. N. (1943). "β-Naphthylmercuric Chloride". Org. Synth.; Coll. Vol., 2, p. 432
  12. Logan, T. J. (1973). "Phenyl(trichloromethyl)mercury". Org. Synth.; Coll. Vol., 5, p. 969
  13. "Reactivity control in palladium-catalyzed reactions: a personal account" Pavel Kocovsky J. Organometallic Chemistry 687 (2003) 256-268. doi:10.1016/j.jorganchem.2003.07.008
  14. . ISBN 0-19-850346-6. Missing or empty |title= (help)
  15. Masao Ono & Masaya Kawakami (1977). "Separation of Newly-Synthesized RNA by Organomercurial Agarose Affinity Chromatography". J. Biochem. 81 (5): 1247–1252. PMID 19428.

External links

This article is issued from Wikipedia - version of the 10/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.