Old Dalby Test Track

Old Dalby Test Track
Legend
Midland Main Line Nottingham Nottingham-Lincoln Line Lady Bay Bridge over River Trent Edwalton Plumtree Stanton Tunnel Widmerpool Upper Broughton Old Dalby control centre Grimston Tunnel Grimston Saxelby Tunnel Mineral line to Waltham on the Wolds Asfordby depot Asfordby Tunnel Birmingham to Peterborough Line to Leicester Great Northern and London & North Western Joint Railway Melton Mowbray Birmingham to Peterborough Line to Oakham

The Old Dalby Test Track is a railway in the United Kingdom which is used for testing new designs of trains. It runs between Melton Mowbray, Leicestershire and Edwalton, on the course of the Midland Railway's route between Kettering and Nottingham which closed to passengers in 1968. It is 13.5 miles (21.7 km) in length.

History

Old Dalby railway test centre

The track was set up by British Rail Research Division, which had used it from May 1966.^[1] After closure as a through route, it was converted into a test track for the Advanced Passenger Train APT-E project, re-opening in September 1970.^[1] The track saw extensive use in the heyday of the Research Division and was used for pantograph development and OHLE testing.

Following privatisation of Britain's railways, the track became the property of BRB (Residuary) Ltd, the body set up to own former BR assets that were not sold off. The track was leased for one peppercorn per annum to Serco and later to Alstom and Metronet (LUL). Following the abolition of the BRBR, ownership passed to Network Rail on 30 September 2013.^[2]

Twenty-first century

British Rail Class 800 undergoing dynamic testing at Old Dalby, 2015

In 2001 the track was leased to Alstom Transport, which electrified the former Down line at 25 kV AC OHLE to test and commission the Class 390 "Pendolino" trains for Virgin Trains on the West Coast Main Line, and re-instated six miles of the former Up line from Old Dalby to the southern portal of Stanton Tunnel to test and commission the proposed ERTMS system for NR.

When Alstom withdrew from the United Kingdom train-building market, the track was threatened with closure before being leased to Metronet in 2007 to test and commission London Underground S Stock trains being manufactured by Bombardier in Derby. To facilitate this, the former Up line was equipped with approximately 4 km (2.5 mi) of London Underground-style conductor rails from Old Dalby (milepost 111) to a point near milepost 114. Testing of 'S' stock began at the end of March 2009. The former Down line retains its 25 kV OHLE.

Serco was awarded the contract to manage the track on behalf of Metronet, giving it the opportunity to attract other users.

In April 2010, the track was used by Class 172 diesel multiple units, also manufactured by Bombardier in Derby.

Network Rail uses the track on an ongoing basis for calibration and testing of measurement and gauging trains.

Plans include the testing the Thales automatic train control system for London Underground, and new mainline infrastructure such as the Series One OCS system by Network Rail.^[3]

During mid January 2014, Network Rail applied for changes to the original planning controls to increase train passes on the line substantially during weekdays citing commissioning of the new Hitachi IEP stock based on the Javelin stock on HS1 for the future electrification of the Great Western Main Line, this undoubtedly secures the future of the line's testing capabilities even further.

References

External links

• Official website

Wikimedia Commons has media related to Old Dalby nuclear flask rail crash test 1984.

• The Old Dalby website contains photographs and a comprehensive history of the line
• Melton Times report on expansion of testing capacity 2014 and beyond
• Youtube video of the Asfordby storage sidings with SERCO LU stock testing December 2012

Coordinates: 52°48′32″N 0°59′36″W / 52.80889°N 0.99333°W / 52.80889; -0.99333