New Haven EP-1

New Haven EP-1

Boxy locomotive with two pantographs raised to contact overhead lines

New Haven EP-1 No. 020, circa 1907. Note the small DC pantograph between the two larger AC pantographs
Type and origin
Power type Electric
Builder Baldwin-Westinghouse
Build date 1905–1908
Total produced 41
Specifications
AAR wheel arr. 1-B-B-1
Gauge 4 ft 8 12 in (1,435 mm)
Wheel diameter 62 inches (1,600 mm)
Length 37 feet 6 12 inches (11.443 m)
Loco weight 102 short tons (93 t)
Electric system(s)
  • 660V DC
  • 11kV 25hz AC
Current collection
Traction motors 4 × Westinghouse 130
MU working Yes
Performance figures
Maximum speed 80 miles per hour (130 km/h)
Power output 1,420 horsepower (1,060 kW)
Career
Operators New Haven
Class EP-1
Numbers 01–041
Delivered 1905–1908
Retired 1947
[1][2]

The New Haven EP-1 was a class of boxcab electric locomotives built by Baldwin-Westinghouse for the New York, New Haven and Hartford Railroad. The locomotives were part of an electrification project undertaken by the New Haven between Grand Central Terminal in New York City and Stamford, Connecticut. Baldwin-Westinghouse delivered 41 locomotives between 1905–1908, and the New Haven retired the last in 1947.

Design

The EP-1 had to support two electric systems and three collection methods. The New York Central Railroad's 660 V third rail DC extended from Grand Central to Woodlawn, where New Haven territory began. Westinghouse installed 11 kV overhead line AC from Woodlawn to Stamford.[3] Finally, the New York Central employed overhead lines over railroad switches in place of third rail electrification.[4] To support these myriad methods, Westinghouse installed two sets of pantographs, one for AC and one for DC collection, and a contact shoe for third rail operation. Control devices within the locomotive prevented drawing power from multiple sources and enabled transition between them without stopping.[4]

The boxcab body was 37 feet 6 12 inches (11.443 m) long and weighed 102 short tons (93 t).[3] Beneath it, initially, were four axles in a pair of trucks (B-B arrangement). After oscillation problems the New Haven added an unpowered axle to each end (1-B-B-1), which resolved the issue.[2] The EP-1 was capable of multiple working, and was the first electric locomotive to do so regularly.[5]

History

Westinghouse delivered the first prototype in 1905, followed by 34 production units in 1907–1908.[3] The New Haven ordered six more in 1908.[6] The EP-1 designation, applied later, stood for "Electric Passenger."[2] The EP-1s handled passenger trains between New York and Stamford, and later New Haven, Connecticut, when the New Haven extended electrification there. Retirements began in 1936 as equipment wore out and newer locomotives became available, but the last left service in 1947.[4]

See also

Notes

References

This article is issued from Wikipedia - version of the 10/31/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.