A mousepad is a surface for placing and moving a computer mouse. A mousepad enhances the usability of the mouse compared to using a mouse directly on a table by providing a surface to allow it to measure movement accurately and without jitter. Some mousepads increase ergonomics by providing a padded wrist rest.
During a 1968 presentation by Douglas Engelbart marking the public debut of a mouse, Engelbart used a control console designed by Jack Kelley of Herman Miller that included a keyboard and an inset portion used as a support area for the mouse. According to Kelley and also stated by Alex Pang, Kelley designed the first mousepad a year later, in 1969.
CRT Cursor Control Mechanism Pad
To assist the operation of a cathode ray tube pointer 10 wherein a metal ball is rolled on a hard surface, the disclosed pad may be utilized. A resilient, rubber-like material 12 is bonded or otherwise attached to a hard base material 14 which keeps the rubber-like material flat. The base has four rubber-like pads 16 on the opposite side from the resilient material to refrain the pad from sliding on the surface of a table, for instance.— Xerox Disclosure Journal, Volume 4, Number 6, November/December 1979
The first commercial manufacturer of mousepads was Moustrak, founded by Bob McDermand. The company began gaining traction when Apple decided to distribute its mousepads, featuring the Apple logo, to computer stores in the United States. Moustrak signed licensing deals with Disney, Paramount, and LucasFilm, and advertised in magazines including MacWorld. However, by the end of the 1980s, lower cost (and lower quality) mousepads turned the product into a commodity.
The Oxford English Dictionary tracks the term mouse pad to the 25 August 1983, publication of InfoWorld, and the predominantly British term mousemat to 17 October 1989, in the publication 3D.
The three most important benefits of the introduction of the mousepad were higher speed, more precision, and comfort for the user. A secondary benefit was keeping the desk or table surface from being scratched and worn by continuous hand and mouse rubbing motion. Another benefit was reduction of the collection of debris under the mouse, which resulted in reduced jitter of the pointer on the display.
When optical mice, which use image sensors to detect movement, were first introduced into the market, they required special mousepads with optical patterns printed on them. Modern optical mice can function to an acceptable degree of accuracy on plain paper and other surfaces. However, some optical mouse users (especially gamers, designers, and other heavy users) may prefer a mousepad for comfort, speed and accuracy, and to prevent wear to the desk or table surface.
A variety of mousepads exist with many different textured surfaces to fit various types of mouse technologies. Vinyl board cover, because of its natural adhesive properties, was a popular mousepad surface around 1980.
After the steel mouse ball was given a silicone rubber surface, the popular fabric-surface mousepad was found to be the most appropriate. It helped keep the rubberized roller-ball surface cleaner and gave better tracking, speed and accuracy than just a desk surface. Such surfaces collected dirt which was then deposited onto the internal rollers that picked off ball movement. Dirty rollers caused erratic pointer movement on the screen.
Early types of optical mice have the problem of not working well on transparent or reflective surfaces such as glass or highly polished wood. These surfaces, which often include desk and table surfaces, cause jitter and loss of tracking on the display pointer as the mouse moves over these reflective spots. The use of mousepads with precision surfaces eliminates spot jitter effects of older and/or low-quality optical mice.
Modern mousepads are typically made of lesser density rubber composites (open cell styrene, butadiene rubber or open cell SBR) with fabric bonded to the upper surface. However, many other types of material have been used, including fabric, plastics, recycled rubber tires, neoprene, silicone rubber, leather, glass, cork, wood, aluminum, stone and stainless steel. High-quality gaming mats are usually made from plastic, glass, aluminum or high-tech fibers.
- "The Demo (article on Engelbart's demo)". Retrieved 2007-02-26., final video
- "Doug Engelbart: The Demo (movie)". Retrieved 2007-02-26., time: 1:12:35
- "Jack Kelley (Herman Miller page)". Retrieved 2007-02-26.
- Alex Soojung-Kin Pang. "The Making of the Mouse". Retrieved 2007-02-26.
- "CRT Cursor Control Mechanism Pad". Xerox Disclosure Journal. November–December 1979. Retrieved 2007-02-26.
- Richard F. Lyon and Martin P. Haeberli (1982). "Designing and Testing the Optical Mouse" (PDF). VLSI Design (Jan./Feb.): 21.
- Smith, Ernie (12 July 2016). "The Best Mouse Pads Money Could Buy". Tedium. Retrieved 25 July 2016.
- Lewis, Peter H. (15 December 1987). "PERSONAL COMPUTERS; Holiday Hardware". The New York Times. Retrieved 25 July 2016.
- Oxford English Dictionary Online, "mouse", compounds 20. d.
- "Mouse Pad Speed and Accuracy". Coolaz. 2014. Retrieved 12 December 2014.
...When our mousepads were tested by a small sample of computer gamers, the feedback was that the increased speed and accuracy gained from the mouse pads texture was welcomed and assisted during use. ...'
|Look up mousepad or mousemat in Wiktionary, the free dictionary.|