Mechanical impedance

Mechanical impedance is a measure of how much a structure resists motion when subjected to a harmonic force. It relates forces with velocities acting on a mechanical system. The mechanical impedance of a point on a structure is the ratio of the force applied at a point to the resulting velocity at that point.[1][2]

Mechanical impedance is the inverse of mechanical admittance or mobility. The mechanical impedance is a function of the frequency \omega of the applied force and can vary greatly over frequency. At resonance frequencies, the mechanical impedance will be lower, meaning less force is needed to cause a structure to move at a given velocity. The simplest example of this is pushing a child on a swing. For the greatest swing amplitude, the frequency of the pushes must be near the resonant frequency of the system.

\mathbf{F}(\omega)=\mathbf{Z}(\omega)\mathbf{v}(\omega)

Where, \mathbf{F} is the force vector, \mathbf{v} is the velocity vector, \mathbf{Z} is the impedance matrix and \omega is the angular frequency.

Mechanical impedance is the ratio of a potential (e.g. force) to a flow (e.g. velocity) where the arguments of the real (or imaginary) parts of both increase linearly with time. Examples of potentials are: force, sound pressure, voltage, temperature. Examples of flows are: velocity, volume velocity, current, heat flow. Impedance is the reciprocal of mobility. If the potential and flow quantities are measured at the same point then impedance is referred as driving point impedance; otherwise, transfer impedance.

See also

References

  1. 'Motion Control Systems', Chapter 5, A. Sabanovic, 2011
  2. Gatti, Paolo L.; Ferrari, Vittorio (1999). Applied Structural and Mechanical Vibrations. E & FN Spon. ISBN 0-419-22710-5.
This article is issued from Wikipedia - version of the 9/22/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.