Gutenberg–Richter law

Gutenberg–Richter law for b = 1

In seismology, the Gutenberg–Richter law[1] (GR law) expresses the relationship between the magnitude and total number of earthquakes in any given region and time period of at least that magnitude.

or

Where:


Background

The relationship between earthquake magnitude and frequency was first proposed by Charles Francis Richter and Beno Gutenberg in a paper published in 1956.[2] This relationship between event magnitude and frequency of occurrence is remarkably common, although the values of a and b may vary significantly from region to region or over time.

GR law plotted for various b-values

The parameter b (commonly referred to as the "b-value") is commonly close to 1.0 in seismically active regions. This means that for given a frequency of 4.0 event there will be 10 times as many magnitude 3.0 quakes and 100 times as many magnitude 2.0 quakes. There is some variation of b-values in the approximate range of 0.5 to 2 depending on the source environment of the region.[3] A notable example of this is during earthquake swarms when b can become as high as 2.5, thus indicating a very high proportion of small earthquakes to large ones.

There is debate concerning the interpretation of some observed spatial and temporal variations of b-values. The most frequently cited factors to explain these variations are: the stress applied to the material,[4] the depth,[5] the focal mechanism,[6] the strength heterogeneity of the material,[7] and the proximity of macro-failure. The b-value decrease observed prior to the failure of samples deformed in the laboratory[8] has led to the suggestion that this is a precursor to major macro-failure.[9] Statistical physics provides a theoretical framework for explaining both the steadiness of the Gutenberg–Richter law for large catalogs and its evolution when the macro-failure is approached, but application to earthquake forecasting is currently out of reach.[10] Alternatively, a b-value significantly different from 1.0 may suggest a problem with the data set; e.g. it is incomplete or contains errors in calculating magnitude.

Roll-off compared to ideal GR law with b=1
Magnitude of the August 2016 Central Italy earthquake (red dot) and aftershocks (which continued to occur after the period shown here)

There is an apparent b-value decrease for smaller magnitude event ranges in all empirical catalogues of earthquakes. This effect is described as "roll-off" of the b-value, a description due to the plot of the logarithmic version of the GR law becoming flatter at the low magnitude end of the plot. This may in large part be caused by incompleteness of any data set due to the inability to detect and characterize small events. That is, many low-magnitude earthquakes are not catalogued because fewer stations detect and record them due to decreasing instrumental signal to noise levels. Some modern models of earthquake dynamics, however, predict a physical roll-off in the earthquake size distribution.[11]

The a-value is of less scientific interest and simply indicates the total seismicity rate of the region. This is more easily seen when the GR law is expressed in terms of the total number of events:

where

the total number of events.

Modern attempts to understand the law involve theories of self-organized criticality or self similarity.

References

  1. Gutenberg and Richter, , pages 1719 ("Frequency and energy of earthquakes").
  2. Gutenberg, B., Richter, C. F., 1956. Magnitude and Energy of Earthquakes. Annali di Geofisica, 9: 1–15
  3. Bhattacharya et al, p. 120
  4. Scholz, C. H. (1968), the frequency-magnitude relation of microfracturing in rock and its relation to earthquakes, BSSA, 58(1), 399–415.
  5. Mori, J., et R. E. Abercombie (1997), Depth dependence of earthquake frequency-magnitude distributions in California: Implication for rupture initiation, Journal of Geophysical Research, 102(B7), 15081–15090.
  6. Schorlemmer, D., S. Wiemer, et M. Wyss (2005), Variations in earthquake-size distribution across different stress regimes, Nature, 437, 539–542, doi: 10.1038/nature04094.
  7. Mogi, K. (1962), Magnitude frequency relations for elastic shocks accompanying fractures of various materials and some related problems in earthquakes, Bull. Earthquake Res. Inst. Univ. Tokyo, 40, 831–853.
  8. Lockner, D. A., et J. D. Byerlee (1991), Precursory AE patterns leading to rock fracture, in Vth Conf. AE/MS Geol. Str. and Mat., édité par Hardy, pp. 45–58, Trans Tech Publication, Germany, The pennsylvania State University.
  9. Smith, W. D. (1981), The b-value as an earthquake precursor, Nature, 289, 136–139; doi:10.1038/289136a0.
  10. Amitrano, D. (2012), Variability in the power-law distributions of rupture events, how and why does b-value change, Eur. Phys. J.-Spec. Top., 205(1), 199–215, doi:10.1140/epjst/e2012-01571-9.
  11. Bhattacharya et al, pp. 119–121
    Pelletier, pp. 34–36.

Bibliography

This article is issued from Wikipedia - version of the 10/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.