Grizzly (.22-caliber rifle)

The Grizzly and the Grizzly 2.0 is a 3D printed .22-caliber rifle created around August 2013.[1] It was created using a Stratasys Dimension 1200es printer.[2] It was created by a Canadian only known by the pseudo name "Matthew" and told The Verge that he is in his late 20s, and his main job is making tools for the construction industry.[2][3]

The original Grizzly fired 1 shot then broke[2] Grizzly 2.0 fired 14 bullets before getting damaged due to the strain.[3] According to the Daily Mail, the Grizzly 2.0 performed so well that the inventor "Matthew" was able to put it to his shoulder and shot off three rounds with the rifle pressed against his cheek without hurting him.[1]

Specification

The “Grizzly 2.0″ has 50 percent larger barrel with a rifled bore, a larger receiver and new hammer.[4] In a video posted online by the creator, the Grizzly seemed to have successfully fired a Winchester Dynapoint .22-caliber bullet, like the Liberator .380. The only metal in the Grizzly is a 1-inch roofing nail plus whatever metal is in the cartridge.[5]

Printer

The printer used to make the rifle was a Stratasys Dimension 1200es printer[2] costing $10,000 as of August 2013.[1] It was made using ABS plastic.[3]

"Matthew" said the rifle had taken 3 days to build, and about 27 hours to print it. He revealed it took him 13 hours to print the receiver, 6.5 hours to print the barrel, 5 hours to print the stock and 2 hours to print the rifle's internal parts.[2]

See also

References

This article is issued from Wikipedia - version of the 6/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.