Ford Sidevalve engine

Ford Sidevalve engine
Overview
Manufacturer Ford Motor Company
Also called Ford Flathead engine
Production 1932–1962
Combustion chamber
Configuration Side-valve straight 4
Cylinder block alloy Iron
Cylinder head alloy Iron
Valvetrain sidevalve
Combustion
Fuel system carburettor
Fuel type Unleaded gasoline
Cooling system Thermosiphon (pump was only fitted after 1953)
Output
Power output 36 BHP
Chronology
Predecessor None
Successor Ford Kent engine
Ford Taunus V4 engine

The Ford Sidevalve is a side valve (flathead engine) from the British arm of the Ford Motor Company. The engine had its origins in the 1930s Ford Model Y, and were made in two sizes, 933cc or "8 HP", and 1172cc or "10 HP". The early engines were very basic and did not have a waterpump as standard relying on thermo-siphon effect to cool, as the Model T's engine had. A water pump was added in 1953 for the 100E models. The Sidevalve engine was used in many smaller Fords as well as farm vehicles, commercial vehicles and a marine version in boats. Production of the engine was stopped in 1962. Windscreen wipers were often driven by the vacuum generated in the inlet manifold.

The Sidevalve Engine was also used in German Fords, starting with the Ford Köln in 1932 and ending with the last rear wheel drive Ford Taunus 12M in 1962.

It was then replaced by the Kent engine in Britain and by the Taunus V4 engine in Germany.

Engine modifications

Many ways were explored to enhance the power output of the standard engine, most notably special exhaust manifolds, twin carburettors, stiffer valve springs, thinner cylinder head gaskets and modified camshafts. The nominal horsepower quoted for each engine size comes from the British method of power calculation for road taxation purposes, and bears no relationship with the actual power output. Displacement volume, which was calculated from the cylinder diameter, stroke and number of cylinders being the dimensions that determined the power for road taxation purposes.

Gearbox & transmission

A three speed gearbox was fitted as standard; three forward and one reverse. Several ways of improving the performance through modifications to the gearbox and transmission train were applied; replacement close ratio gears fitted to gearbox, overdrive gears fitted behind the original gearbox and higher ratio crown & pinion gears fitted to the differential unit on the back axle.

Use - Ford cars using side-valve engines;

Use - Other makers or models using Ford side-valve engines;

Ancillary equipment, designers & other related information

See also

External links

Bibliography

This article is issued from Wikipedia - version of the 3/11/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.