Fall protection
Fall protection is the use of controls designed to protect personnel from falling or in the event they do fall, to stop them without causing severe injury. Typically, fall protection is implemented when working at height, but may be relevant when working near any edge, such as near a pit or hole, or performing work on a steep surface.
There are four generally accepted categories of fall protection: fall elimination, fall prevention, fall arrest and administrative controls.[1] According to the US Department of Labor, falls account for 8% of all work-related trauma injuries leading to death.[2] Federal statutes, standards and regulations in the United States pertaining to the requirements for employers to provide fall protection are administered by OSHA.[3]
Types of fall protection
In most work-at-height environments, multiple fall protection measures are used concurrently.
Fall elimination
Fall elimination is often the preferred way of providing fall protection. This entails finding ways of completing tasks without working at heights.
Fall prevention
- Fall guarding is the use of guard rails or other barricades to prevent a person from falling. These barricades are placed near an edge where a fall-hazard can occur, or to surround a weak surface (such as a skylight on a roof) which may break when stepped on.
- Fall restraint is a class of personal protective equipment to prevent persons who are in a fall hazard area from falling, e.g., fall restraint lanyards. Typically, fall restraint will physically prevent a worker from approaching an edge.
Fall arrest
Fall arrest is the form of fall protection that stops a person who has fallen.
Administrative controls
Administrative controls are used along with other measures, but they do not physically prevent a worker from going over an edge.[4] Examples of administrative controls include placing a safety observer or warning line near an edge, or enforcing a safety policy which trains workers and requires them to adhere to other fall protection measures, or prohibiting any un-restrained worker from approaching an edge.
References
- ↑ Ellis, J. Nigel (2011). Introduction to fall protection (4th ed.). American Society of Safety Engineers. p. 28. ISBN 9781885581587.
- ↑ Bickrest, Ed. "Fall Protection: Failure is Not an Option". EHS Today. Retrieved 24 March 2016.
- ↑ "Duty to have fall protection. 1926.501". Occupational Safety & Health Administration. United States Dept. of Labor. Retrieved 30 March 2016.
- ↑ "Fall Protection". United States Department of Labor. Occupational Safety and Health Administration. Retrieved 24 March 2016.