Evanescent field

In electromagnetics, an evanescent field, or evanescent wave, is an oscillating electric and/or magnetic field which does not propagate as an electromagnetic wave but whose energy is spatially concentrated in the vicinity of the source (oscillating charges and currents). Even when there in fact is an electromagnetic wave produced (e.g., by a transmitting antenna) one can still identify as an evanescent field the component of the electric or magnetic field that cannot be attributed to the propagating wave observed at a distance of many wavelengths (such as the far field of a transmitting antenna).

The hallmark of an evanescent field is that there is no net energy flow in that region. Since the net flow of electromagnetic energy is given by the average Poynting vector, that means that the Poynting vector in these regions, as averaged over a complete oscillation cycle, is zero.[note 1]

Schematic representation of a surface wave propagating along a metal-dielectric interface. The fields away from the surface die off exponentially (right hand graph) and those fields are thus described as evanescent in the z direction

Usage of the term

In many cases one cannot simply say that a field is or is not evanescent. For instance, in the above illustration energy is indeed transmitted in the horizontal direction. The field strength drops off exponentially away from the surface, leaving it concentrated in a region very close to the interface, for which reason this is referred to as a surface wave. However there is no propagation of energy away from (or toward) the surface (in the z direction), so that one could properly describe the field as being "evanescent in the z direction." This is one illustration of the inexactness of the term. In most cases where they exist, evanescent fields are simply thought of and referred to as electric or magnetic fields, without the evanescent property (zero average Poynting vector in one or all directions) ever being pointed out. The term is especially applied to differentiate a field or solution from cases where one normally expects a propagating wave

Everyday electronic devices and electrical appliances are surrounded by large fields which have this property. Their operation involves alternating voltages (producing an electric field between them) and alternating currents (producing a magnetic field around them). The term "evanescent" is never heard in this ordinary context. Rather, there may be concern with inadvertent production of a propagating electromagnetic wave and thus discussion of reducing radiation losses (since the propagating wave steals power from the circuitry) or interference. On the other hand "evanescent field" is used in various contexts where there is a propagating (even if confined) electromagnetic wave involved, to describe accompanying electromagnetic components which do not have that property. Or in some cases where there would normally be an electromagnetic wave (such as light refracted at the interface between glass and air) the term is invoked to describe the field when that wave is suppressed (such as with light in glass incident on an air interface beyond the critical angle).

Although all electromagnetic fields are classically governed according to Maxwell's equations, different technologies or problems have certain types of expected solutions, and when the primary solutions involve wave propagation the term "evanescent" is frequently applied to field components or solutions which do not share that property. For instance, the propagation constant of a hollow metal waveguide is a strong function of frequency (a so-called dispersion relation). Below a certain frequency (the cut-off frequency) the propagation constant becomes an imaginary number. A solution to the wave equation having an imaginary wavenumber does not propagate as a wave but falls off exponentially, so the field excited at that lower frequency is considered evanescent. It can also be simply said that propagation is "disallowed" for that frequency. The formal solution to the wave equation can describe modes having an identical form, but the change of the propagation constant from real to imaginary as the frequency drops below the cut-off frequency totally changes the physical nature of the result. One can describe the solution then as a "cut-off mode" or an "evanescent mode";[1] while a different author will just state that no such mode exists. Since the evanescent field corresponding to the mode was computed as a solution to the wave equation, it is often discussed as being an "evanescent wave" even though its properties (such as not carrying energy) are inconsistent with the definition of wave.

Although this article concentrates on electromagnetics, the term evanescent is used similarly in fields such as acoustics and quantum mechanics where the wave equation arises from the physics involved. In these cases, solutions to the wave equation resulting in imaginary propagation constants are likewise termed "evanescent" and have the essential property that no net energy is transmitted even though there is a non-zero field.

Evanescent wave applications

In optics and acoustics, evanescent waves are formed when waves traveling in a medium undergo total internal reflection at its boundary because they strike it at an angle greater than the so-called critical angle.[2][3] The physical explanation for the existence of the evanescent wave is that the electric and magnetic fields (or pressure gradients, in the case of acoustical waves) cannot be discontinuous at a boundary, as would be the case if there was no evanescent wave field. In quantum mechanics, the physical explanation is exactly analogous—the Schrödinger wave-function representing particle motion normal to the boundary cannot be discontinuous at the boundary.

Electromagnetic evanescent waves have been used to exert optical radiation pressure on small particles to trap them for experimentation, or to cool them to very low temperatures, and to illuminate very small objects such as biological cells or single protein and DNA molecules for microscopy (as in the total internal reflection fluorescence microscope). The evanescent wave from an optical fiber can be used in a gas sensor, and evanescent waves figure in the infrared spectroscopy technique known as attenuated total reflectance.

In electrical engineering, evanescent waves are found in the near-field region within one third of a wavelength of any radio antenna. During normal operation, an antenna emits electromagnetic fields into the surrounding nearfield region, and a portion of the field energy is reabsorbed, while the remainder is radiated as EM waves.

Recently, a graphene-based Bragg grating (one-dimensional photonic crystal) has been fabricated and demonstrated its competence for excitation of surface electromagnetic waves in the periodic structure using a prism coupling technique.[4]

In quantum mechanics, the evanescent-wave solutions of the Schrödinger equation give rise to the phenomenon of wave-mechanical tunneling.

In microscopy, systems that capture the information contained in evanescent waves can be used to create super-resolution images. Matter radiates both propagating and evanescent electromagnetic waves. Conventional optical systems capture only the information in the propagating waves and hence are subject to the diffraction limit. Systems that capture the information contained in evanescent waves, such as the superlens and near field scanning optical microscopy, can overcome the diffraction limit; however these systems are then limited by the system's ability to accurately capture the evanescent waves.[5] The limitation on their resolution is given by


where is the maximum wave vector that can be resolved, is the distance between the object and the sensor, and is a measure of the quality of the sensor.

More generally, practical applications of evanescent waves can be classified in the following way:

  1. Those in which the energy associated with the wave is used to excite some other phenomenon within the region of space where the original traveling wave becomes evanescent (for example, as in the total internal reflection fluorescence microscope)
  2. Those in which the evanescent wave couples two media in which traveling waves are allowed, and hence permits the transfer of energy or a particle between the media (depending on the wave equation in use), even though no traveling-wave solutions are allowed in the region of space between the two media. An example of this is so-called wave-mechanical tunnelling, and is known generally as evanescent wave coupling.

Total internal reflection of light

Top to bottom: representation of a refracted incident wave and an evanescent wave at an interface.

For example, consider total internal reflection in two dimensions, with the interface between the media lying on the x axis, the normal along y, and the polarization along z. One might naively expect that for angles leading to total internal reflection, the solution would consist of an incident wave and a reflected wave, with no transmitted wave at all, but there is no such solution that obeys Maxwell's equations. Maxwell's equations in a dielectric medium impose a boundary condition of continuity for the components of the fields E||, H||, Dy, and By. For the polarization considered in this example, the conditions on E|| and By are satisfied if the reflected wave has the same amplitude as the incident one, because these components of the incident and reflected waves superimpose destructively. Their Hx components, however, superimpose constructively, so there can be no solution without a non-vanishing transmitted wave. The transmitted wave cannot, however, be a sinusoidal wave, since it would then transport energy away from the boundary, but since the incident and reflected waves have equal energy, this would violate conservation of energy. We therefore conclude that the transmitted wave must be a non-vanishing solution to Maxwell's equations that is not a traveling wave, and the only such solutions in a dielectric are those that decay exponentially: evanescent waves.

Mathematically, evanescent waves can be characterized by a wave vector where one or more of the vector's components has an imaginary value. Because the vector has imaginary components, it may have a magnitude that is less than its real components. If the angle of incidence exceeds the critical angle, then the wave vector of the transmitted wave has the form

which represents an evanescent wave because the y component is imaginary. (Here α and β are real and i represents the imaginary unit.)

For example, if the polarization is perpendicular to the plane of incidence, then the electric field of any of the waves (incident, reflected, or transmitted) can be expressed as

where is the unit vector in the z direction.

Substituting the evanescent form of the wave vector k (as given above), we find for the transmitted wave:

where α is the attenuation constant and β is the propagation constant.

Evanescent-wave coupling

Plot of 1/e-penetration depth of the evanescent wave against angle of incidence in units of wavelength for different refraction indices.

Especially in optics, evanescent-wave coupling refers to the coupling between two waves due to physical overlap of what would otherwise be described as the evanescent fields corresponding to the propagating waves.[6]

One classical example is frustrated total internal reflection in which the evanescent field very close (see graph) to the surface of a dense medium at which a wave normally undergoes total internal reflection overlaps another dense medium in the vicinity. This disrupts the totality of the reflection, diverting some power into the second medium.

Coupling between two optical waveguides may be effected by placing the fiber cores close together so that the evanescent field generated by one element excites a wave in the other fiber. This is used to produce fiber optic splitters and in fiber tapping. At radio (especially microwave) frequencies, such a device is called a directional coupler

Evanescent-wave coupling is synonymous with near field interaction in electromagnetic field theory. Depending on the nature of the source element, the evanescent field involved is either predominantly electric (capacitive) or magnetic (inductive), unlike (propagating) waves in the far field where these components are connected (identical phase, in the ratio of the impedance of free space). The evanescent wave coupling takes place in the non-radiative field near each medium and as such is always associated with matter; i.e., with the induced currents and charges within a partially reflecting surface. Other commonplace examples are the coupling between the primary and secondary coils of a transformer, or between the two plates of a capacitor. In quantum mechanics the wave function interaction may be discussed in terms of particles and described as quantum tunneling.


See also


  1. or expressing the fields E and H as phasors, the complex Poynting vector has a zero real part


  1. IEEE Standard Dictionary of Electrical and Electronics Terms (IEEE STD 100-1992 ed.). New York, NY: The Institute of Electrical and Electronics Engineers, Inc. 1992. p. 458. ISBN 1-55937-2400.
  2. Tineke Thio (2006). "A Bright Future for Subwavelength Light Sources". American Scientist. American Scientist. 94 (1): 40–47. doi:10.1511/2006.1.40.
  3. Marston, Philip L.; Matula, T.J. (May 2002). "Scattering of acoustic evanescent waves...". Journal of the Acoustical Society of America. 111 (5): 2378. Bibcode:2002ASAJ..111.2378M. doi:10.1121/1.4778056.
  4. Sreekanth, Kandammathe Valiyaveedu; Zeng, Shuwen; Shang, Jingzhi; Yong, Ken-Tye; Yu, Ting (2012). "Excitation of surface electromagnetic waves in a graphene-based Bragg grating". Scientific Reports. 2. Bibcode:2012NatSR...2E.737S. doi:10.1038/srep00737. PMC 3471096Freely accessible. PMID 23071901.
  5. Neice, A., "Methods and Limitations of Subwavelength Imaging", Advances in Imaging and Electron Physics, Vol. 163, July 2010
  6. Zeng, Shuwen; Yu, Xia; Law, Wing-Cheung; Zhang, Yating; Hu, Rui; Dinh, Xuan-Quyen; Ho, Ho-Pui; Yong, Ken-Tye (2013). "Size dependence of Au NP-enhanced surface plasmon resonance based on differential phase measurement". Sensors and Actuators B: Chemical. 176: 1128. doi:10.1016/j.snb.2012.09.073.
  7. Fan, Zhiyuan; Zhan, Li; Hu, Xiao; Xia, Yuxing (2008). "Critical process of extraordinary optical transmission through periodic subwavelength hole array: Hole-assisted evanescent-field coupling". Optics Communications. 281 (21): 5467. Bibcode:2008OptCo.281.5467F. doi:10.1016/j.optcom.2008.07.077.
  8. Karalis, Aristeidis; J.D. Joannopoulos; Marin Soljačić (February 2007). "Efficient wireless non-radiative mid-range energy transfer". Annals of Physics. 323: 34. arXiv:physics/0611063v2Freely accessible. Bibcode:2008AnPhy.323...34K. doi:10.1016/j.aop.2007.04.017.
  9. "'Evanescent coupling' could power gadgets wirelessly", Celeste Biever, NewScientist.com, 15 November 2006
  10. Wireless energy could power consumer, industrial electronicsMIT press release
  11. Axelrod, D. (1 April 1981). "Cell-substrate contacts illuminated by total internal reflection fluorescence". The Journal of Cell Biology. 89 (1): 141–145. doi:10.1083/jcb.89.1.141. PMC 2111781Freely accessible. PMID 7014571.

External links

This article is issued from Wikipedia - version of the 11/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.