Starling (structure)

This article is about the architectural term. For the bird species, see Starling.
The starlings of Tower Bridge are clearly seen beneath the roadway.

In architecture, a starling (or sterling) or, more commonly, cutwater is a defensive bulwark, usually built with pilings or bricks, surrounding the supports (or piers) of a bridge or similar construction. Starlings are shaped to ease the flow of the water around the bridge, reducing the damage caused by erosion or collisions with flood-borne debris, and may also form an important part of the structure of the bridge, spreading the weight of the piers. So the cutwaters make the current of water less forceful.

One problem caused by starlings is the accumulation of river debris, mud and other objects against the starlings, potentially hindering the flow. The starling has a sharpened upstream edge sometimes called the nose. The cutwater edge may be of concrete or masonry, but is often capped with a steel angle to resist abrasion and focus force at a single point to fracture floating pieces of ice striking the pier. In cold climates the starling is typically sloped at an angle of about 45°  so current pushing against the ice tends to lift the downstream edge of the ice translating horizontal force of the current to vertical force against a thinner cross-section of ice until unsupported weight of ice fractures the piece of ice allowing it to pass on either side of the pier.[1] A sloped, ice-cutting starling is known as a starkwater.[2]

See also

References

Wikimedia Commons has media related to Starlings.
  1. ↑ Urquhart, Leonard Church (1959). Civil Engineering Handbook (4th ed.). New York: McGraw-Hill Book Company. pp. 8–75.
  2. ↑ Raymond, William G.; Riggs, Henry E.; Sadler, Walter C. (1937). The Elements of Railroad Engineering (5th ed.). New York: John Wiley & Sons. p. 163.
This article is issued from Wikipedia - version of the 1/30/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.