Columbia Bridge (New Hampshire)

Columbia Bridge

Bridge in U.S. states of Vermont & New Hampshire
Crosses Connecticut River
Locale Columbia, New Hampshire and Lemington, Vermont
Maintained by Town of Columbia
ID number 29-04-07 (NH #33)
45-05-02 (VT)
Characteristics
Design Howe truss bridge[1]
Total length 145.75 ft (44.425 m)
Width 20.58 ft (6.273 m) (maximum), 14.66 ft (4.468 m) (roadway)
Longest span 131.5 ft (40.08 m)
Load limit 6 tons
Clearance above 13.08 ft (3.987 m)
History
Construction end

1912 (1912)

Columbia Covered Bridge
Nearest city Columbia, New Hampshire
Coordinates 44°51′11″N 71°33′5″W / 44.85306°N 71.55139°W / 44.85306; -71.55139Coordinates: 44°51′11″N 71°33′5″W / 44.85306°N 71.55139°W / 44.85306; -71.55139
Area 1 acre (0.4 ha)
Architect Charles Babbitt
Architectural style Howe truss covered bridge
NRHP Reference # 76000123[2]
Added to NRHP December 12, 1976

The Columbia Bridge is a covered bridge, carrying Columbia Bridge Road over the Connecticut River between Columbia, New Hampshire and Lemington, Vermont. Built in 1911-12, it is one of only two New Hampshire bridges (along with the Mount Orne Covered Bridge) built with Howe trusses, and is one of the last covered bridges built in the historic era of covered bridge construction in both states. It was listed on the National Register of Historic Places in 1976.[2]

Description and history

The Columbia Bridge stands in southeastern Lemington and northwestern Columbia, both rural communities in the northern parts of their respective states. It carries Columbia Bridge Road between United States Route 3 in New Hampshire and Vermont Route 102 in Vermont. It is in a rural agricultural setting, and is oriented northwest-to-southeast across the Connecticut River, on abutments of dry laid stone that have been faced in concrete. It is a wood-iron Howe truss design, with a single span that is 146 feet (45 m) long. The bridge has a total width of 20.5 feet (6.2 m) and a roadway with of 15.5 feet (4.7 m), and an internal clearance of 13 feet (4.0 m). The exterior is sheathed in vertical board siding, which extends a short way into each portal to protect the truss ends. The siding on the north side rises to a height of 6 feet (1.8 m), leaving an open space between it and the gabled roof.[3]

The bridge was built by Charles Babbitt in 1912, replacing one destroyed by fire the previous year, and is the third to stand on the site. The bridge is considered to be one of the last built in either state during the historic period of covered bridge construction.[3] It was rehabilitated by the state of New Hampshire in 1981 at a cost of $143,000.


See also

References

  1. Official New Hampshire site about this bridge
  2. 1 2 National Park Service (2010-07-09). "National Register Information System". National Register of Historic Places. National Park Service.
  3. 1 2 "NRHP nomination for Columbia Bridge" (PDF). Retrieved 2014-10-25.

External links

This article is issued from Wikipedia - version of the 11/25/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.