Burst mode (weapon)
In automatic firearms, burst mode or burst fire is a firing mode enabling the shooter to fire a predetermined number of rounds, usually two or three rounds on hand held weapons and over 100 on anti-aircraft weapons, with a single pull of the trigger. This firing mode is commonly used in submachine guns, assault rifles and carbines. Other types of firearms, such as machine pistols (e.g., the Beretta 93R) may also have a burst mode.
The burst mode is normally employed as an intermediate fire mode between semi-automatic and fully automatic, although some firearms lack a "full auto" capability and use a burst mode instead. For instance, the M16A4 (the standard-issue service rifle of the USMC) has, in addition to the semi-automatic mode, a three-round burst mode, which replaced the fully automatic mode of the previous M16A1. The reason for this replacement was the massive waste of ammunition and very poor performance of soldiers who fired their rifles in fully automatic mode during the Vietnam War.
The number of rounds fired in a burst is almost universally determined by a cam mechanism that trips the trigger mechanism for each shot in the burst. Some designs, as employed on the M16A4, will terminate the burst if the trigger is released before the burst is complete, while others will reset the cam position, so the next burst will fire a full number of rounds.
Some firearms, like the AN-94, have "hyperburst," a feature in which rounds are fired in incredibly quick succession (1800 rpm in the case of the AN-94). This supposedly improves armor-penetration capability. Hyperburst is performed by having the barrel slide back and receive another round in the chamber pulled by a pulley and is fired as the barrel slams at the bolt, when the first chambered round is fired when the sliding barrel is at rest, as opposed to a cam mechanism of the M16 design.
- Selective fire
- Automatic firearm
- Bump fire, a technique to simulate full-automatic fire from a semi-automatic firearm