Bisphenol A diglycidyl ether

Bisphenol A diglycidyl ether
IUPAC name
Other names
Diglycidyl ether of bisphenol A; 2,2-Bis(4-glycidyloxyphenyl)propane; Epoxide A
1675-54-3 YesY
3D model (Jmol) Interactive image
Abbreviations BADGE; DGEBA
ChemSpider 2199 N
ECHA InfoCard 100.015.294
EC Number 216-823-5
KEGG C14348 N
MeSH C019273
PubChem 2286
Molar mass 340.42 g·mol−1
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Bisphenol A diglycidyl ether (commonly abbreviated BADGE or DGEBA) is an organic compound used as constituent of epoxy resins. The compound is a colorless solid (commercial samples can appear yellow) that melts slightly above room temperature.[1]


It is prepared by O-alkylation of bisphenol A with epichlorohydrin. This reaction mainly affords bisphenol A diglycidyl ether, as well as some oligomer. The degree of polymerization may be as low as 0.1.[2] The epoxide content of such epoxy resins is of interest. This parameter is commonly expressed as the epoxide number, which is the number of epoxide equivalents in 1 kg of resin (Eq./kg), or as the equivalent weight, which is the weight in grams of resin containing 1 mole equivalent of epoxide (g/mol).

Epoxy resins are crosslinked using hardeners (curing agents). The most common curing agents for epoxy resins are polyamines, aminoamides, and phenolic compounds.[3]


Bisphenol A has attracted much attention as a potential endocrine disruptor.[4][5] It has antiandrogen and PPARγ-modulating properties.

BADGE is listed as an IARC Group 3 carcinogen, meaning it is "not classifiable as to its carcinogenicity to humans".[6] From the 1990s onward, concern has been raised over this possible carcinogenicity because BADGE is also used in epoxy resins in the lining of some tin cans for foodstuffs, and unreacted BADGE may end up in the contents of those cans.[4]

See also


  1. Pham, Ha Q.; Marks, Maurice J. (2012). "Epoxy Resins". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a09_547.pub2.
  2. Mark, Herman. Encyclopedia of Polymer Science and Technology.
  3. Forrest, M.J.: Coatings and Inks for Food Contact Materials, in RAPRA review reports, vol. 16, no. 6 (2005), p.8
  4. 1 2 Walfried Rauter, Gerald Dickinger, Rudolf Zihlarz and Josef Lintschinger, Determination of Bisphenol A diglycidyl ether (BADGE) and its hydrolysis products in canned oily foods from the Austrian market, Z. Lebensm. Unters. Forsch. A 208 (1999) 208–211
  5. Guideline for public health evaluation of organic chemical coatings in contact with drinking water (coating guideline) "Archived copy" (PDF). Archived from the original (PDF) on 2012-12-23. Retrieved 2012-06-20.
  6. Group 3: Not classifiable as to carcinogenicity to humans Archived November 28, 2008, at the Wayback Machine., International Agency for Research on Cancer
This article is issued from Wikipedia - version of the 11/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.