Automotive industry in New Zealand
The automotive industry in New Zealand supplies a market which has always had one of the world's highest car ownership ratios. The distributors of new cars are essentially the former owners of the assembly businesses. At the dealership level they have maintained their old retail chains in spite of the establishment of the many new independent businesses built since the 1980s by specialists in used imports from Japan. Toyota entered into direct competition with those used-import businesses refurbishing old Toyotas from Japan and selling them through their own dealers as a special line. The nation's car fleet is accordingly somewhat older than in most developed countries.
New Zealand no longer assembles passenger cars. Assembly plants closed after tariff protection was removed and distributors found it cheaper to import cars fully assembled. Cars had been assembled at a rate nearing 100,000 a year in 1983 but with the country's economic difficulties their numbers dropped sharply. Towards the end of the decade the removal of various restrictions as part of the nation's restructuring of its economy made available low-priced if old used cars from Japan. These used cars met the local need for high ownership levels in a financially straitened world but since that time continue to arrive in such large numbers they substantially increase the average age of the nation's fleet.
Toyota, Ford, and General Motors Holden division still dominate the new car market. The tiny home market—the size of a large city— and distance from potential export customers worked with first-world pay rates against the formation of any significant indigenous manufacturers. Only small boutique kit and replica car firms were able to survive. They produce original kit and replica cars using local-made car bodies and imported componentry for both the local and international markets. Several of these, while small in size, are noted internationally for the quality of their workmanship.
The industry began with the importation in 1898 of two Benz cars from Paris by William McLean. Apart from a few attempts to create locally made cars in the 1900s (decade) most were imported and a local assembly industry got under way in the 1920s.
McLean's motor cars arrived in Wellington from Sydney by the SS Rotomahana on 19 February 1898. They were a Benz Petrolette and a Benz Lightning. After McLean's Benz cars were imported it was almost two years before the next four-wheel car was imported. A three-wheeler arrived in Auckland in November 1898 for Messrs George Henning and WM Service. At least three three-wheelers were imported in 1899: a De Dion for Acton Adams of Christchurch, Aucklander Arthur Marychurch's 4-wheeled Star sold after a few weeks to Skeates and Bockaert who took up the agency and sold it to Christchurch grocers, Wardell Bros, and a third for Robert and Frederick Maunsell of Masterton, sons of the missionary. All three arrived in September 1899, with Acton Adams's vehicle being involved in New Zealand's first motor vehicle accident two months later.
The three motor-tricycles were followed in 1900 by a Darracq and a Locomobile steam car along with a Pope-Toledo, Eagle, Argyll, Oldsmobile, and Daimler. In 1903, 153 cars and motorbikes were imported. By 1925 imports had increased to over 20,000 cars a year. Cars in 1903 cost more than twice the average annual income meaning the market was limited to the wealthy. Petrol or Benzine was not readily available except as a lighting fuel for certain lamps and in some instances for sufficient quantity owners had to order it from Sydney, Australia.
Early indigenous cars
If steam-powered vehicles are counted, the first vehicles were believed to be a steam buggy constructed by a Mr Empson of Christchurch in 1870 and a steam buggy imported from Edinburgh by J L Gillies of Dunedin, also in 1870. The first traction engine, an 8 hp Reading Iron Works Limited traction engine, had only been imported three years earlier. Gillies steam buggy was more probably a Thomson Road Steamer and not a steam buggy. Gillies sold the Thomson to the Canterbury Provincial Government in 1871 for ₤1,200. These were followed by Professor Robert Julian Scott's 1881 steam buggy.
There is debate about who made the first petrol driven vehicle. Timaru engineer Cecil Wood made a petrol engine in 1897, but later made an unsubstantiated claim to have created and driven a three-wheel vehicle in 1896 followed by a four-wheel vehicle in 1898. His first independently confirmed vehicles date from 1901.
On 3 May 1898 a Nelson newspaper reported that a Mr Sewell of the Upper Buller had constructed a motor car and was to drive it to Wakefield that week. A letter to the Evening Post's editor later that year stated that there were two engineering firms in Wellington constructing motor car engines. Whether Wood, Sewell, or the engineering firms made a roadworthy vehicle at this time is not known as there were no further articles about them.
The first New Zealand designed and constructed automobile known to have run was made by Frederick Dennison. It was a motor tricycle reported in the local newspaper on 8 May 1900. The article stated that Dennison intended to convert the tricycle to a four-wheel motor-car. He did so and drove it from Christchurch to Oamaru in July 1900. It was the only one made and was destroyed by fire on its return journey. A replica of this car was completed and driven in June 2000 in celebration of its first journey.
This was followed by several models constructed by Wood between 1901 and 1903, A W Reid of Stratford's steam cars from 1903 to 1906, Gary Methven of Dunedin's petrol driven car, Pat and Thomas Lindsay of Timaru's steam cars in 1903, and Topliss Brothers of Christchurch's car in 1904. A Blenheim engineer, John Birch, constructed the Marlborough in 1912 and several cars named Carlton's between 1922 and 1928 at Gisborne. One of these is still in existence with the Gisborne vintage car club.
Level of car ownership
- 1924: USA 143, Canada 77, New Zealand 71, Australia 23, United Kingdom 14, France 11
- 1967: Canada 283, Sweden 250, Australia 274, New Zealand 293.
- 2011: Canada 662, Sweden 520, Australia 731, New Zealand 708. (years:— Canada 2014, Sweden 2010, Australia 2015, New Zealand 2011)
Impact of legislation
Government legislation has always had a major impact on the New Zealand industry. The first automobile legislation was the McLean Motor Car Act 1898 rushed through by McLean just before his cars were unloaded. It legalised the operation of motor vehicles, providing they were lit after dark, and did not go faster than 20 kilometres (12 miles) per hour. The Motor Cars Regulation Act 1902 followed. A tariff did apply to cars and car parts brought into New Zealand, although with McLean's cars there was some initial confusion as to what rate might apply. In 1906 local coachmakers sought an increase in the tariff to 50% for completely built up vehicles and in 1907 a 20% tariff was introduced on cars that arrived in New Zealand already assembled to protect them but there remained no duty on chassis.
Higher duties were imposed on imports from countries outside the British Empire. Nevertheless new cars registered during 1917 show rather more than 90 per cent of New Zealand's cars originated in North America During the First World War the tariff on car bodies was reduced to 10% but the same rate was also imposed on the previously free chassis. Import statistics of the time provide different quantities for bodies and more numerous chassis no mention of complete cars. Unlike in Australia local coachbuilders lost business in the early 1920s. Some of the bigger firms ended up producing only commercial vehicles, truck cabs, trailers but mainly bus bodies, for example New Zealand Standard Motor Bodies (Munt Cottrell) in Petone, Steel Bros in Christchurch. Some simply became motor retailers themselves like Auckland's Schofields in Newmarket.
Before the First World War motoring was reserved for the prosperous. Roads in cities and towns may have been very dusty but were smooth and well-formed. Townsfolk were on the whole satisfied with their English cars designed for the same conditions, built with care to high engineering standards but with only lip-service to interchangeability of parts. They required regular expensive maintenance at short intervals. American cars were built in large quantities and thus cheaper, designed by much better engineers and built for bad surfaces and to cope with irregular maintenance which might be hard to find even in their homeland.
During the 1920s the most common vehicles were U.S. brands made in Canada (to attract reduced Imperial Preference duties) or USA. For example, in the first nine months of 1927, out of 8,888 cars sold the five top-selling brands, 4612 cars, were all North American. At the onset of the great depression car imports fell away.
Cars from Britain
In 1934 Government announced tariffs intended to further protect Empire trade while encouraging local assembly. The level of imports began to rise at this time and by 1940 42 per cent had been added to the size of the nation's car fleet. British sourced vehicles took a much larger share. The prosperity of country districts with the bad roads and the demand for big strongly built economically priced American cars did not revive until the end of the decade or the outbreak of war.
Another factor locking in market shares was an urgent need to conserve foreign currency which saw the government introduce import quotas at the end of 1938. Licences were allocated to local importers in proportion to their imports in the previous year. Because the new licensing system was based on recent history it kept North American imports at an artificially low level when their market was reviving.
The licensing system had the effect of locking out the car manufacturers, i.e. new entrants to the local market unless they bought their erstwhile distributor and with that business its entitlement to the necessary licences. But this new factor had no effect until after the war. The outcome was to be quite a large number of locally owned, small, possibly under-capitalised assembly plants often substantially supported by their foreign suppliers.
Australia and Japan
British sourced cars maintained their new share into the 1960s when Detroit's big three began to replace British Vauxhalls and Zephyrs with their Australian-made Holden Specials, Falcons and, later, Valiants which soon accounted for a third of the market. All locally assembled cars were their manufacturer's most basic stripped down versions with a tiny number of honourable exceptions, the brief post-war runs of Jaguars or Rovers etc. This was brought about by the struggle to meet demand within the amount of cash the government's exchange controls made available. One of the outcomes of import licensing was to make relatively new second hand vehicles more expensive than new ones. Another was the expectation that a car would be made to last a long time and undergo many repairs that would be regarded as uneconomic in almost any other market, possibly accounting for the ready acceptance of so very many used imports. Any Government intervention was designed to protect the New Zealand car assembly and related industries and to reduce the effect of vehicle purchases on the country's balance of payments with the rest of the world.
Japanese cars entered the market in the 1960s beginning local assembly by New Zealand owned businesses in the middle of that decade. One of their attractions was that they did not all display the stripped down to bare essentials look of the local cars.
By the 1980s when the number of assembly plants reached its high of 16 following the relaxation of restrictions on importing ckd packs the Government recognised that it was cheaper and more efficient for cars to be assembled in the country where they were made. In the second decade of the 21st century Australia's manufacturing as well as assembly industry followed the same path, 30 years later.
The Motor Vehicle Industry Development Plan was put into effect in 1984. It began by opening import competition, though spreading that over the four years to 1988, and by mid-1988 only seven of the sixteen separate assembly plants remained in business. The Government announced in December 1987 following a review of the plan that all import controls would be removed from 1 January 1989. At the same time a programme for reduction of tariffs on vehicles and their components was announced.
As tariffs on imported cars were phased out a flood of second-hand Japanese imports swamped the new car market beginning decades of low or no growth in sales of new cars. Imports rose from less than 3,000 cars in 1985 to 85,000 in 1990. By 2004 over 150,000 vehicles were imported in one year. Second-hand Japanese cars made up the majority of these cars. The last tariffs were removed in 1998.
- Body shell
- assembly and welding
- metal finish
- spraying and drying — in the painting booth usually a plant's most expensive item
- Hard trim —glass, instruments panel etc. and in some cases soft trim
- Body drop on engine suspension and wheels, soft trim —seats, upholstery added
- Final inspection
- Completely Knocked Down kits would require all the above processes
- Partly Knocked Down kits can be finished to the point of body drop but may also require all but body assembly and welding
Assembly plant buildings, plant, machinery and other equipment are not specific to the car assembly industry and could be used for many other activities. What is special is the use of the equipment to one purpose.
New Zealand's car assembly industry has its roots in pre-car trades. In the early 20th century, coachbuilders and wheelwrights quickly moved into building bodies for imported motor vehicle chassis. In 1926 after the announcement that General Motors would begin local assembly a deputation of members of the New Zealand Coach and Motor Body Builders' Federation waited on the Prime Minister asking for greater protection because they said American manufacturers were dumping cars in New Zealand and flooding the market. The Prime Minister deferred any decision until he had heard from other interested parties. The local managing director of General Motors responded that the failure of chassis imports to grow was "entirely due to public preference and price".
Until the advent of all-steel bodies which began in USA in 1915 with Dodge and began in Britain more than a decade later motor bodies in essence remained the upholstered structures of timber and sheet metal of 19th century carriages and the required skills were readily available. Imported bodies faced a duty of twenty per cent, materials to be used in bodies manufactured in New Zealand entered duty-free. Initially chassis entered duty free with or without a body. In the six years ended March 1933 64,300 cars were imported but only 7,600 were given New Zealand made bodies and tariff protection ended.
From the 1920s to the mid 1930s American makes mostly sourced in Canada for Imperial Preference tariffs dominated the local assembly industry. Postwar supply was restricted by a dollar shortage then balance of payments difficulties and British later combined with Australian makes dominated. In the late 1960s assembly of Japanese vehicles began to supplant the British vehicles and by the end of the 1990s British vehicles had virtually disappeared.
1922 Colonial Motor Company
Rouse and Hurrell, coachbuilders and wheelwrights of Courtenay Place Wellington, took up a Ford Motor Company sole agency for New Zealand in 1908. In 1911 their business was transferred to a newly incorporated Colonial Motor Company Limited.
CMC's first specialised car assembly building was begun in 1919 and completed in 1922 at 89 Courtenay Place, Wellington – a steel box of nine floors, its design and location on the nearest ground off the reclamation to deepwater Taranaki Street wharf based on the Ford assembly works in Ontario, Canada. The building stood over 30 metres high and was Wellington’s tallest building at the time.
The top two floors were used for administration. Assembly of cars from imported packs of parts started on level 7, and finished vehicles were driven out the ground floor. CMC also built smaller assembly plants in Parnell, Auckland, and in Timaru. At the end of 1925 staff numbers were 641: Wellington 301, Parnell 188 and Timaru 152 people. At that time daily output was: 25, 20 and 18 respectively. In the 1970s Wellington's former assembly building was given a new facade inspired by a car radiator.
1926 General Motors
In 1926, General Motors opened a plant in well-established industrial area, Petone, in the Hutt Valley. In its first twelve months ended mid September 1927 the plant assembled 2,191 cars. In late 1929 GM was able to report the following locally sourced materials were used in their cars: wool in the upholstery, Miro timber for commercial bodies, varnishes, glues, enamels and numerus small parts, glass would shortly be added. Other articles which in GM's opinion should be made locally included carpets and top material and its necessary padding. All associated advertising literature was locally printed and in colour. At first, it produced American Chevrolet, Pontiac and Buick cars, adding Oldsmobile in 1928.
Its first British Vauxhalls were built in 1931, along with Bedford trucks. In its first eight years it assembled more than 25,000 vehicles.
By the late 1930s the plant employed 760 and was building GM's Frigidaire commercial refrigerators. Silencers or mufflers were added to the range of products, 172,000 of them were made in the next ten years. A run of German Opel Kadetts was put through. The factory's size was almost doubled in 1939, more than 6 acres were now under roof and the site had been expanded to 12¼ acres incorporating a cricket ground, sports field and parking for employees' cars and bicycles. This Petone plant closed in 1984 and production was moved to Trentham.
Australian Holdens were first introduced as assembled cars in 1954, but the first Holden from General Motors’ Petone plant, an FE Series, emerged in 1957. A large new plant at Trentham in the Hutt Valley was opened in 1967, where General Motors built such vehicles as the Australian Holden HQ series, Commodore, and UK Vauxhall Viva. By the early 1970s, more than 80% of New Zealand's new cars were supplied by General Motors, Ford, Todd Motors and New Zealand Motor Corporation. By 1990 the General Motors plant at Trentham had been reduced to a truck assembly operation, later to close altogether.
In July 1931 the Rover Company of New Zealand Limited told local newspapers a building was in course of erection at 35 Jackson Street Petone where they would assemble Rover cars. It was hoped the building would be completed before Christmas. New Zealand materials would be used as far as possible. Parts that couldn't be made locally would be imported from the English factory.
The new factory was formally opened by the Prime Minister on 17 February 1932 in the presence of among others the chairman of the Development of Industries Board and the Rover managing director from England. The Prime Minister noted the Rover company was the first English company to open an overseas chassis assembly and body-building plant in any part of the Empire. He also said "Britain bought our produce and it was only right for New Zealand to buy in return from Britain". The only imported material in the bodywork was the leather and the steel panels.
The price of the car, Rover's Family Ten, was reduced 5 per cent the following July "with the benefit of economies arising out of New Zealand manufacture". It was described as greatly improved over the imported car having special bodywork, strengthened chassis frame, heavier rear springs etc all to suit local conditions.
In February 1932 Rover Coventry announced strengthening of their Family Ten chassis by using heavier gauge material and re-designed cross members to improve torsional rigidity. These improvements were, they said, the outcome of lengthy testing on New Zealand's and Australia's roughest roads carried out to make the cars suitable for overseas use.
By July 1933 the former Rover factory premises were vacant and advertised for sale. In 1935 tin plate printers and canister manufacturers J Gadsden and Company, subsidiary of an Australian business of the same name, were making four-gallon petrol cans (benzine tins) in the former Rover building.
A factor identified as economic nationalism. In 1927 when 80 per cent of cars were imported from North America the method of calculating duty was adjusted in the hope of encouraging imports of the smaller British cars and more importantly encouraging more enterprises into local assembly. At the height of the depression government announced its determination to ensure as much as possible work should be done by New Zealand labour. In August 1934 Minister of Finance Gordon Coates announced that as the present tariff concessions had not been sufficient to encourage foreign manufacturers to assemble their cars in New Zealand the new duties to take effect from 1 January 1935 would be:
- Complete vehicles: British 15 per cent, Others 60 percent
- Unassembled vehicles: British 5 percent, Others 50 percent
Completely Knocked Down
- The minister's determination for 1935
The industry had always been encouraged to increase local content. Compliance required importers to bring in the chassis frame assembled with its engine and gearbox but no other parts attached. Scuttle and windscreen could be assembled and primed. The body shell could be assembled and primed. Upholstery materials could not be sewn but might be cut to shape. There was no restriction on the components included in the CKD pack. The first determination was published in the New Zealand Gazette of 18 October 1934.
Having lost the local bodybuilding trade upholsterers found they could not survive and in 1939 upholstery materials could no longer be included in imported CKD packs, nor could batteries and the degree of assembly of imported components was further restricted.
Import Quotas by value
Import licensing or fixed quotas to ration imported cars —and all other imports— were first announced at the end of 1938. Commentators expressed concern that this was a short step from a total takeover of the country's import trade and at least would allow the government to issue licences in such proportions and to such persons or businesses as it might choose. The minister's announcement was greeted by the chairman of the Primary Producers Federation with the description: "the Hitler plan" adding (even if it was a) "retreat from the Moscow road".
The purpose was to conserve foreign exchange and to protect local industry, in particular to promote manufacturing to improve employment opportunities and to reduce the economy's reliance on the rural sector. During the war the restrictions were generally recognised to be necessary but they were not dismantled only eased when conditions improved. In the early 1950s the import licensing system was overhauled and many categories were made exempt. A balance of payments crisis in 1957 brought new controls to restrict imports but by foreign exchange allocation. Another foreign exchange crisis in 1967 brought a reversal of the easing during the previous decade. A new policy in 1979 allowed importers to obtain extra licenses when they could show "significantly deficient" price/quality differentials between local and imported products. By the early 1980s the industry employed around 8,000 workers. However by 1981 official thinking had begun to swing away from import controls considering they did not in the long run remedy underlying conditions though they might be entirely successful at controlling imports. If the intention was to protect local industry tariffs, officials considered, would be a more efficient tool.
Accordingly, by 1984 economic liberalisation, reduced protection for local businesses and deregulation were becoming official policy. A rationalisation scheme was underway when a new government elected in July 1984 found it was facing a foreign exchange crisis and chose to deal with the economic situation with these new tools. The automotive assembly industry was recognised to be essentially artificial. Its poor build quality meant consumers preferred imported cars. The cost of a fully assembled car on Auckland's wharves was barely more than the cost of a CKD kit. In December 1984 all controls on outward and inward foreign exchange transactions were lifted and the same month the Motor Vehicle Industry Plan 1984 was approved. The Closer Economic Relations agreement with Australia stopped immediate free trade in cars and components. Import licensing for most goods was removed in July 1988 and the process of removing controls protecting the motor industry further accelerated. A final review was set down for 1992.
The following plants closed between 1984 and 1990:
- Ford Motor Co — Lower Hutt
- Mazda Motors — Otahuhu
- Motor Holdings — Otahuhu and Waitara
- New Zealand Motor Corporation - Honda — Auckland
- Nissan — Otahuhu
- Suzuki — Wanganui
- General Motors – Upper Hutt
- Toyota — Christchurch (commercial) September 1996
- VANZ (Mazda and Ford) — Manukau City March 1997
- Mitsubishi — Porirua June 1998 (360 workers)
- Nissan — Wiri July 1998 (230 workers)
- Honda — Nelson closed August 1998 (220 workers)
- Toyota — Thames October 1998 (330 workers)
Assembly plants continued
1935 Todd Motors
Todd Motors developed out of a Ford agency held by their small Otago stock and station agency. They later distributed a number of American brands throughout New Zealand. One of them was Maxwell which was bought by Walter P. Chrysler and given his name. In 1929 Todd set up an assembling (sic) plant in Napier Street, Freeman's Bay Auckland. Modern methods were planned including electric cranes. This Auckland assembly plant was closed and sold in September 1932 to J Gadsden & Co to make four-gallon petrol containers
In 1935 having successfully introduced Russia sourced Europa brand petrol and oil to New Zealand the Todd brothers built a new building and created a small car assembly plant in Petone which gathered more facilities about it as sales rose. There, starting with Fargo trucks and Plymouth cars, Todds assembled Rootes Group's Hillman, Humber, Commer and Karrier brand vehicles and Chrysler Corporation's Plymouth, Dodge and DeSoto Diplomats from Canada Britain (Chrysler Kew) and Belgium and, from 1963 until 1979, Valiants from Chrysler Australia.
The building that became the main Petone factory building had been a Railway Workshop until New Zealand Railways' new Woburn workshops were built. Situated opposite Austin on McKenzie Street later known as the Western Hutt Road now a part of the Hutt Expressway the old factory became an indoor sports hall until it was removed in 2013. The site became a part of the Petone campus of Wellington Institute of Technology and it is used by their School of Construction.
In 1971 Todd acquired New Zealand's Mitsubishi franchise and erected a large capacity purpose-built plant at Porirua which it named Todd Park. There Todd continued to build Rootes/Chrysler's vehicles for a few years but steadily switched over to Mitsubishi's. Todd Park had begun assembling vehicles in early 1974. After 24 years Mitsubishi, having bought it from Todd in 1986, closed the plant in 1998.
1936 Ford Motor Company
In late 1935 Ford Motor Company of Canada announced from Windsor Ontario that construction of a new assembly plant would begin immediately at Wellington and it would be ready to operate on 1 July 1936.
So Ford Motor Company of New Zealand took over assembly and distribution of its own vehicles in its new factory at Seaview in Lower Hutt. The principal retail operations remained with Colonial Motor Co.
The Petone factory is now a PlaceMakers Building Supply outlet.
New Zealand Motor Corporation
New Zealand Motor Corporation was a public listed company formed in 1970. It was a combination of the two independent Morris and Austin assemblers Austin Distributors Federation and Dominion Motors. Ownership passed to Honda in the last quarter of the 20th century and its business was renamed Honda New Zealand.
Rationalisation followed the aggregation of all the Austin and Morris plants and by 1985 NZMC was down to two plants: Morrin Road, Panmure in Auckland's suburbs and Stoke near Nelson. Panmure closed in 1987.
As well as the more popular British Leyland cars NZMC had assembled a few Jaguar, Rover and Land Rover products and Leyland commercial vehicles at its assembly plant at Stoke. During the 1980s Stoke switched to assembling Japanese Honda vehicles. It finally closed on 21 August 1998.
1936 Motor Assemblies
South Island retailers Amuri Motors, P H Vickery, Cossens and Black and Boon and Co (coachbuilders), announced they planned to assemble cars in the St Asaph Street, Christchurch factory of Boon and Co. Dodge and Standard cars would be assembled from CKD packs beginning with Dodge. Motor Assemblies (South Island) Limited was incorporated in June 1935. Each partner held one quarter of the capital. Rover having closed it would have been New Zealand's third assembly plant, the other two being in Wellington but within a month of the announcement of Motor Assemblies' plans Todd, in the presence of the acting prime minister, had opened a plant in Petone.
By December 1936 Dodge display advertisements pointed up the contribution of Motor Assemblies to the New Zealand economy and detailed their many assembly activities in their Christchurch factory. It is difficult to see why a 1.6-litre wood-framed-body Standard Twelve priced at £365 might be preferred by a non-enthusiast to an all-steel six-cylinder 3.6-litre Dodge sedan priced at £389 except on the two scores of (presumed) fuel consumption and parking space.
In 1939 three brands of car were being assembled at St Asaph Street. The purchase of 3 acres in Ensor's Road, Opawa was announced at the end of July 1939 and it was expected construction of 40,000 square feet of buildings would be complete by the end of the year. The site would include a test track. St Asaph Street premises would then be sold. War was declared just five weeks after that announcement and there appears to be no subsequent record of the Ensor's Road intentions.
A new plant in Tuam Street between Barbados and Madras Streets did begin operations after the war assembling Studebaker and Standard cars. In 1954 it was acquired by Standard-Triumph International.
Christchurch production stopped 24 August 1965 and all its plant and machinery was moved more than 400 kilometres to Nelson and into a never-used 100,000 square foot building on a 27 acres site intended for a cotton mill but abandoned in mid 1962.
S-T I was bought by Leyland Motors in 1960 and ultimately the Nelson operation became part of British Leyland in 1968.
1937 Seabrook Fowlds
Distributors of Austins in Auckland Province and Taranaki, Seabrook Fowlds, announced in the winter of 1936 that to comply with the new tariff regulations for imported vehicles they would build "an assembly factory" in Auckland to supply Austins to these areas. Situated behind the timber yards at the corner of Great South Road and Manukau Road, Newmarket on a boundary with Epsom's residential area it would be a single storey building with two brick and two iron walls and its paint shop would have an air conditioning plant to absorb paint vapour. Previously there had been a small facility in Parnell in St George's Bay Road.
In the new Newmarket plant the body shell was removed from the wooden case of its export packaging which also held its matching chassis and pre-assembled engine, gearbox and back axle units. The body was painted and trimmed and seats and upholstery added, wiring completed then the whole reunited with the newly assembled chassis and its mechanicals. There were 54 office and works staff at the new factory and its output was expected to be 20 cars each week.
1939 Austin South Island
David Crozier Limited had been running two small assembly plants for some years. In March 1939 a consortium of South Island dealers announced a new assembly plant would be built in Christchurch on a six and a half acre block beside the Christchurch-Lyttelton railway line. It was expected the new business would require a staff of 125 people and it was expected to open in July 1939.
Austin Motor Industries Limited, the company which would own the business was incorporated 25 May 1939. Shareholders' businesses were in Christchurch, Dunedin and Invercargill. Vickery Black and Boon were involved with Motor Assemblies (see above) which contracted assembly to Boon and Company.
1939 Dominion Motors
Wellington's Dominion Motors business began in 1912 with wholesale distribution of imported vehicles. In 1919 it amalgamated with a Christchurch business, J A Redpath’s Universal Motor Co, and opened new retail departments in Christchurch as well as in Wellington. Distributorships included Oldsmobile, Crossley, Chevrolet, Stutz, Rolls-Royce, Hudson and Essex and Vauxhall.
Auckland operations were run from premises at 166 Albert Street (formerly Gillett Motors, Buick dealers, absorbed March 1926) where there was one of a number of small workshops run in the main centres by Dominion Motors that finished assembly of partly knocked down cars. In 1928 the 161 Albert Street "assembly line" took one hour to assemble each new car.
Just before Christmas 1930 Morris Motors Limited announced the appointment of Dominion Motors to control the distribution of Morris cars and commercial vehicles in New Zealand They took over Morris's Auckland Province retailing from long established Harrison & Gash, originally coachbuilders, who had their showroom at 175 Albert Street and carried out servicing at the foot of Khyber Pass in Newmarket.
In 1938 it built in Mortimer Pass Newmarket a real assembly plant on 1½ acres of bare land beside Highwic bought from the Buckland estate. The building was completed at the end of February 1939 when it was expected the necessary plant would be installed by the middle of the year. The new plant would turn out 10 vehicles a day at the Mortimer Pass frontage. War was declared on 3 September 1939 but the plant was opened and began production. By the start of the 1950s it employed more than 600 people. A new extra plant was built in Panmure in 1953. Opened in 1954 it continued to grow until 1961 and built Morris Minors until 1975.
Production was transferred from Mortimer Pass and Nuffield Street to Panmure in 1978.
Second World War
During the Second World War General Motors Petone built 1,200 Universal Carriers also known as Bren Gun carriers, sub-contracts for parts were spread throughout the country. Other light-armoured vehicles, mortars, shells, grenades, anti-tank mines and Tommy guns were made too. Joining them were aircraft frames and parts and the assembly of light tanks and aircraft. The nation's 9,600 tractors in use in 1939 reached over 18,900 by 1946. Until the 1980s Wellington's main airport building was a wartime De Havilland aircraft factory.
US Forces sent down to Wellington worn out or badly damaged heavy trucks and jeeps from war service in the Pacific Islands. Reclamation was carried out in the Hutt Valley by Ford - jeeps, General Motors - heavy trucks and Todd Motors - weapons carriers. Each truck went back with a jeep on its tray
In the four years leading up to the outbreak of war the national car fleet had bounced back by 42 per cent from its depression-starved level and New Zealand was second only to the United States in cars per head. Petrol rationing came into force on 5 September 1939 and lasted until 31 May 1950 with just 17 months respite in 1946-1947. The volume for private car owners was eased or constricted as the nation's circumstances permitted partly because tankers on a run to New Zealand were unavailable for a long time and in any case the government welcomed reduced foreign currency payments. By mid-1942 a rubber shortage put tyres in very short supply, Japan had captured most of the plantations. A motor trade journal pointed out that with the standard private petrol ration and the usual mileage from new tyres a set of tyres would last 36 years. Newspapers suspecting cheating on petrol supplies threatened to track cars from remote places at well-attended race meetings. It became necessary to obtain a licence to buy gumboots and hotwater bottles.
The US Navy's mid-1942 success in the Battle of the Coral Sea removed the threat of Japanese invasion.
From May 1950 buyers could dodge the apparently endless queues for a new car by using "overseas funds". They could even import cars for which no import licence would ever be provided. In essence the buyer would pay for the overseas content of the car from a source beyond the control of New Zealand's manifold foreign currency restrictions. The balance of dealer overheads, duty and sales tax was paid in local currency when the vehicle was delivered. If the vehicle were locally assembled the "overseas funds" requirement was much lower. Until late in the scheme "Overseas funds" were not difficult to obtain or "create". Most New Zealanders disliked the necessary deviousness.
It seems to have been seen as a valuable safety valve and guide to the shape of a free market. Holden dealers even incorporated the statistics in their advertising.
Assembly plants continued
1946 Austin Distributors Federation
Austin agent George H. Scott became New Zealand's official Austin factory representative in 1919. He formed the Austin Distributor Federation.
1946 Associated Motor Industries and Austin Distributors Federation
Two new companies were incorporated in August 1945 Associated Motor Industries Limited and Austin Distributors Federation (N.Z.) Limited both of Wellington. The Petone plant, situated on McKenzie street across the road from the Todd Motors plant, closed in May 1983. After various uses including a paintball arena and a car dealership the building was demolished in 2015
1958 Motor Holdings
Motor Holdings developed from the New Zealand franchise of Jowett Motors. The New Zealand franchise imported and assembled Bradford's very light vans and trucks in Auckland. Following Jowett's 1954 departure from the industry the New Zealand company won the Volkswagen franchise and changed its name to VW Motors. By 1958 VW Motors had built a new assembly plant at Fort Richard Rd in Otahuhu. By 1964 the parent company of Motor Holdings was formed, which controlled 15 smaller companies, including VW Motors and the new assembly company of Motor Industries International Ltd. During the 1960s and 1970s Motor Holdings assembled many different makes in addition to Volkswagen including Studebaker, Nash, Hudson, Peugeot 404, Datsun, Simca, Skoda, the Fiat Bambina, and the New Zealand-made Trekka. The company became European Motor Distributors (EMD) in 1978.
1964 Steel Brothers
- Toyota New Zealand Christchurch
Steel Brothers Canterbury Coach Factory began making commercial motor vehicle coachwork in the early 1900s. They were among the first to assemble Japanese cars in New Zealand. In 1964 Steel Brothers incorporated Steel Motor Assemblies Limited and began assembling Prince Glorias. They followed with more Datsuns (Nissans) and added Mazdas.
In February 1967 they began to put together the first New Zealand assembled Toyotas, Toyota Corona T40 and T50 cars for Consolidated Motor Industries which owned the New Zealand Toyota franchise. Consolidated Motor Industries was a partnership of Mercedes-Benz importers Cable-Price-Downer with Challenge Corporation renamed in November 1970 as Consolidated Motor Distributors.
Manufacturers like Toyota were unable to establish their own assembly plants because New Zealand's import licensing system granted licences by marque to existing franchise holders. So Toyota was obliged to buy the licence holders.
In February 1977 Toyota acquired from Challenge a 20 per cent stake in Consolidated Motor Distributors, which now controlled Campbell in Thames, and in May 1979 CMD was re-named Toyota New Zealand Limited. Purchase from the New Zealand shareholders was completed in June 1992. Toyota also acquired Steel Motor Assemblies and renamed it Toyota New Zealand Christchurch.
Steel Brothers also made and exported Lotus Seven sports cars from 1973 to 1979. Prototypes of a replacement car were made but did not enter production.
Though changes of regulations had begun in 1978 New Zealand's long-distance internal transport system was transformed in 1983 when New Zealand Railways Corporation' long-haul freight monopoly was removed. Steelbro having built more than 5,000 truck cabs and bodies in the previous ten years elected to concentrate on their trailers and semi-trailers.
1964 Campbell Motor Industries
- Toyota New Zealand Thames
Goldmining centre Thames was from 1872 the base of A & G Price and it remains so. In the 1960s A & G Price was the heavy engineering component of vehicle importer and conglomerate Cable Price Downer, owners with Challenge Corporation of Toyota franchise holder Consolidated Motor Distributors. Steel Motor Assemblies in Christchurch assembled Toyota Coronas for Consolidated Motor Distributors later known as Consolidated Motor Industries.
Campbell Tube Products (exhaust pipes, mufflers) established at Thames in 1939 was a subsidiary of long established 438 Queen Street and provincial Auckland motor vehicle importers and distributors Campbell Motors (Willys, Studebaker). Already having a presence in Thames Campbell's bought land from Thames's local council in 1963 to build an assembly plant for Campbell Motor Industries to build American Motors Rambler cars. Their first Rambler came off the assembly line in September 1964. By 1966 Peugeots, Hino Contessas and Isuzu Belletts had been added to the line.
New Zealand's first Toyota Corollas were assembled by Campbell Motor Industries at Thames in April 1968 along with a number of vehicles made by American Motors, an aggregation of almost all surviving US brands outside Detroit's Big Three. American Motors vehicles assembled included Rambler Classic, Rebel, Matador, and Jeep. Although the Rambler brand was officially dropped by AMC from 1968, the marque was continued in New Zealand, Australia and other export markets of AMC during the 1970s. Challenge had become the major shareholder by 1975 and by 1977 sold this holding to Consolidated Motor Industries which was renamed Toyota New Zealand in May 1979.
Original equipment manufacturers
Locally manufactured components included upholstery, paint, batteries, tyres and rubber components, windscreens, glass, wiring looms, radios, exhaust systems and bumpers. They had been favoured since the 1920s but received their greatest encouragement immediately after the Second World War.
The conflict between what seemed commonsense to overseas suppliers and local requirements could make for strange events. It was reported that CKD units were being received with ready installed spark plugs in their engines. Assemblers were obliged to remove and destroy the plugs and replace them with inferior plugs of local manufacture.
The component industry shared the fate of the assembly industry.
Location of assembly plants
- 72 per cent (by quantity) of local assembly was carried out in the Hutt Valley
- 19 per cent in Auckland
- 5 per cent in Nelson
- 4 per cent in Thames
- 1 per cent in Christchurch
A snapshot of the industry 1966
- Passenger vehicle assembly by firm and model 1966
- Quantity — Share — Brand
- Ford Motor Company of New Zealand
- 2,118 — 3.3 per cent — Anglia
- 4,898 — 7.7 per cent — Cortina
- 3,103 — 4.9 per cent — Zephyr Zodiac
- 2,128 — 3.3 per cent — Falcon
- 90 — 0.2 per cent — Other
- 12,337 — 19.4 per cent — TOTAL
- General Motors New Zealand
- 6,470 — 10.2 per cent — Vauxhall
- 8,651 — 13.6 per cent — Holden
- 394 — 0.6 per cent — Chevrolet
- 201 — 0.3 per cent — Pontiac
- 36 — 0.1 per cent — Other
- 15,752 — 24.8 per cent — TOTAL
- Todd Motors
- 5,742 — 9.0 per cent — Hillman/Hunter
- 3,033 — 4.8 per cent — Chrysler
- 573 — 0.9 per cent — Singer
- 325 — 0.5 per cent — Renault
- 53 — 0.1 per cent — Other
- 9,726 — 15.3 per cent — TOTAL
- Dominion Motors
- 8,716 — 13.7 per cent — Morris/Nuffield
- 905 — 1.4 per cent — Wolseley
- 9,621 — 15.1 per cent — TOTAL
- Austin Distributors
- 1,648 — 2.6 per cent — Austin Mini
- 2,289 — 3.6 per cent — Austin 1100
- 1,667 — 2.6 per cent — Austin 1800
- 228 — 0.4 per cent — Other
- 5,832 — 9.2 per cent — TOTAL
- Motor Industries (International)
- 2,491 — 3.9 per cent — Volkswagen
- 1,321 — 2.1 per cent — Fiat
- 416 — 0.6 per cent — Skoda
- 371 — 0.6 per cent — Simca
- 4,599 — 7.2 per cent — TOTAL
- Leyland Standard-Triumph
- 2,331— 3.7 per cent — Triumph
- Steel Bros. (Addington)
- 23 — 0.0 per cent — Toyota
- 614 — 1.0 per cent — Prince
- 637 — 1.0 per cent — TOTAL
- Campbell Industries
- 380 — 0.6 per cent — Peugeot
- 266 — 0.4 per cent — Hino
- 332 — 0.5 per cent — Rambler
- 8 — 0.0 per cent — Isuzu
- 349 — 0.6 per cent — Datsun
- 1,335 — 2.1 per cent — TOTAL
- Other Companies
- 1,397 — 2.2 per cent — Other Companies
- All Companies
- 63,567 — 100.0 per cent — TOTAL
Source: Report by New Zealand Vehicle Manufacturer as quoted in IBRD statistical data 24 April 1968
The first Japanese cars constructed in New Zealand were Nissans, then known as Datsuns. Datsun Bluebird P312s were built in Mount Wellington from March 1963. Until it built its own permanent plant in Wiri, south Auckland, in the late 1970s, Nissans were assembled all over New Zealand - by NZ Motor Bodies in Mt Wellington (early Bluebirds) Campbell Industries in Thames (1200 and 1600, 120Y, 180B), Motor Holdings, Waitara (1200 wagon, 120Y wagon), Todd Motors, Porirua (180B) a Nissan-owned 'temporary' plant in Mt Roskill, Auckland (1200, 120Y) and commercial vehicle plants in Glen Innes and Mangere.
Other Japanese manufacturers followed Nissan with Toyota Coronas (and later Crowns) being assembled by Steel Brothers Limited in Christchurch and Campbell's in Thames building the Corolla from the late 1960s. Steel Brothers Limited also assembled Lotus Sevens under licence. Campbell Industries Limited also assembled Hino Contessas, the Isuzu Bellett, and Toyota Corollas after their takeover of Hino.
New Zealand Motor Corporation first built Hondas in Petone in from 1976, adding Mt Wellington, Auckland, later and eventually consolidating at the former Jaguar/Triumph/Rover/Land Rover plant in Nelson. Todd Motors replaced its Petone plant in 1975 with a large new facility in Porirua to produce Mitsubishi, Chrysler and Talbot vehicles plus some Datsuns.
Mazda B-Series pickup trucks were first built by Steelbros (later Toyota) in 1969 and the first cars in 1972 were made by Motor Holdings in Otahuhu and, later Mount Wellington (taking over the Motor Bodies plant). Later Mazda assembly was shared with Ford in a joint assembly plant called Vehicle Assemblers NZ (VANZ), originally Ford's new Wiri plant opened in 1973.
Prior to Campbell Motors in 1964, earlier Renaults like the Dauphine and R8 were assembled by Todd Motors under contract while the first NZ-built Peugeots were assembled at Motor Holdings in Otahuhu.
Ladas were introduced in the late 1980s and early 1990s as part of an import deal between Fontera's predecessor, the New Zealand Dairy Board and the Soviet Union but were never locally assembled. The franchise was put up for sale in early 1993, as the New Zealand automotive market contracted.
In 2014 prominent Auckland businessman Toa Greening proposed constructing Tango T600 electric microcars under licence as a means to reducing traffic congestion, particularly in Auckland, New Zealand's largest city.
New Zealand assembled 1967
In this period the world's fourteen largest motor companies were:
- General Motors, Ford, Chrysler, Volkswagen, Fiat, British Motor Holdings, Renault, Toyota, Citroen, Nissan, Peugeot, American Motors, Daimler-Benz, Volvo
NZIER review 1971
In 1970 three-quarters of the cars produced were assembled in the Hutt Valley, most of the rest were assembled in Auckland. Nine companies carried out the assembly, three of them were overseas-owned. Each company had one plant except one of them (Austin) which had a plant in both Hutt Valley and Auckland. By that time imported components represented just 60 per cent of a car's wholesale price fallen from 71 per cent in the 1940s.
New Zealand Institute of Economic Research judged that assembly was not capital intensive and that most of the work required unskilled labour. In 1971 they estimated that including freight but without duty fully imported vehicles would cost around 3 per cent less than locally assembled cars. At the same time the costs of local assembly and local components were around double the costs if carried out by the overseas manufacturer. The report of the Institute's study claimed that limiting the then current production levels to one or two models assembled by one or two plants would bring significant savings from economies of scale. It was also claimed that production of 200,000 units a year would be needed to give major economies of scale. In summary forcing local manufacture was not difficult but the results were not fully satisfactory. It was suggested that the protection afforded British and Australian vehicles be dropped as low as permitted by treaties with those countries.
Demise of the assembly plants
With the reduction and removal of tariffs through the 1980s and 1990s plus the importation of second hand Japanese cars, the major assembly plants began to close. New Zealand Motor Corporation which had closed its aging Newmarket plant in 1976 and Petone plant in 1982 closed their Panmure plant in 1988. General Motors closed its Petone plant in 1984 and its Trentham plant in 1990. 1987 saw a run of closures: Motor Industries International, Otahuhu, Ford Seaview, Motor Holdings Waitara. Suzuki in Wanganui closed 1988 and VANZ at Sylvia Park in 1997. Toyota Christchurch in 1996 and VANZ Wiri the next year. Finally in 1998 along with Mitsubishi Porirua, bought from Todd in 1987, Nissan shutdown at Wiri, Honda closed in Nelson and Toyota in Thames.
Second Hand Imports and Left Hand Drive vehicles
In the early 1990s, import regulations were relaxed and an influx of Japanese second hand vehicles occurred. These had a two-fold effect. Second hand car prices collapsed and the New Zealand public were faced with a huge range of Japan-only, low mileage motor vehicles, many of which were unheard of in neighbouring Australia, where otherwise car trends were similar. The relaxation of regulations also led to many imported American and European cars, trucks and SUVs. Despite being a right hand drive country many left hand drive cars, mostly from the United States or Canada, could be seen on New Zealand roads until 2001 when the New Zealand government introduced new regulations requiring owners of LHD cars to have a special permit. Prior to this a permit was not required to own and use a left hand drive vehicle. Accordingly, subsequently imported LHD vehicles were required to be converted to right hand drive with some exceptions. The two main exceptions are: Category A. LHD vehicles under 20 years of age that have been recognised as special interest vehicles by the NZ Transport Agency and have been issued with a Category A left-hand drive vehicle permit, and Category B. Light vehicles that were manufactured 20 years or more before the vehicle was certified in New Zealand.
From Trekka to date
Legislation had created a virtual closed shop to local manufacturers with the large assembly plants of General Motors, Ford, Todd Motors and Dominion Motors making it virtually impossible for indigenous start up companies to compete. Several ventrues started making utility vehicles, mainly aimed at farmers such as the Trailmaker (1965–71), the Terra (1967–1975) and the most successful the Trekka from 1966 to 1973. Others in the same period attempted to make production cars like the Anziel and Hamilton Walker's Rotarymotive never got started.
In 1974 two young Whataroa brothers, Kevin and Rodney Giles, formed the Duzgo Manufacturing Company to make a small two wheel drive light utility vehicle for use primarily on farms. Their creation, called the Duzgo was made using assorted Austin and Morris parts, a single-cylinder Kohler 12 hp engine and a double gearbox giving 12 forward and three reverse gears. Later models used a Robin 14-16 hp twin opposed engine. It was light and ran on knobbly motorcycle tyres which gave it excellent traction in muddy farm conditions. In all 10 were made by 1979 before the Customs Department determined that they were a vehicle manufacturing business and therefore needed to pay 30% sales tax on each vehicle. This effectively ended their business. In 2004 a Duzgo featured in the BBC series Billy Connolly's World Tour of New Zealand. There is a Duzgo (possibly number 1) in the Coaltown Museum, Queen Street, Westport and several still remain in use.
With the removal of all tariffs in 1998, new car companies need to be able to compete directly against overseas competition. The most recent New Zealand companys to try have been aimed niche markets. The first was Hulme in 2006, which is aiming to create a model for the supercar market. Its website stated that the first production model was expected to be completed in 2012. It was followed in 2013 by Martin Foster's Zetini Haast Barchetta, another sports car. In 2014 it was priced at $NZ215,590 plus GST with a six-month lead time for delivery. Whether either of these company's has sold any cars, as at May 2015, is unknown.
In 2016 Mike McMaster designed and Magoos Street Rods of Kuripuni, Masterton made wersion of the tuktuk. The three wheel machine used a mix of Suzuki Swift and Harley-Davidson parts. He planned to initially build about 20 per annum.
Alternative fuel vehicle development
There have been several electric vehicles developed in New Zealand, although none have made it into production. University of Canterbury's Department of Electrical and Electronic Engineering has been researching electric powered vehicles since the 1970s, one by the University of Waikato called the UltraCommuter in 2008 and the other in 1995 by Heron called the PC80 and made for the electricity supply company, Powerco. Canterbury Universitys first vehicle, EV1, was registered for road use in September 1976. This was followed by modified an 1962 Austin A40 Farina, renamed EV2, in the early 1980s. This underwent further development up until 2000. In 1999 Dr Simon Round of the Department acquired a 1992 2nd generation Toyota MR2 which was shipped to New Zealand from Japan. The project on this car, renamed EV3, began in 2001 with the car being registered for road use in May 2006.
The Engineering School of Waikato University is continuing work on electric and solar powered vehicles with a Suzuki Carry being converted to electricity in 2014. The van was to be driven to Christchurch to take part in New Zealand's first electric motorsport event, Evolocity on 30 November 2014.
Auckland University has been working on inductive power transfer technology for a number of years. This provides a means of recharging electric vehicles without the need for them to be directly coupled to a power supply. In 2013 Otago Polytechnic Associate Professor Zi Ming (Tom) Qi along with students from the Polytechnic, the National Taiwan University of Science and Technology, and China’s Shenzhen Polytechnic teamed to developed an electric car which was driven by electric motors and had four independently turning wheels. By November 2015 Qi announced that the car was being manufactured in China for assembly in New Zealand.
Kit cars and replicas
New Zealand had a long history of small garages and vehicle enthusiasts modifying and creating sports and sports racing cars. The Everson brothers, who were noted for making New Zealand first indigenous twin engined mono-plane, between 1935 and 1937 created a small two-seater rear engined car called the Everson Cherub. Three different one-off models were made by the brothers. Ernest's son Cliff built a variety of Everson models from the 1960s to the 1980s. The most successful was his eight Cherub's that were similar in design to the Mini Moke.
In the early 1950s, with the advent of fibreglass bodied cars, a new opportunity arose for local companies associated with car enthusiasts to create car bodies. Among these early manufacturers was Weltex Plastics Limited of Christchurch, which imported a Microplas Mistral sports car mould and began making bodies and chassis in 1956. They were followed in 1958 by Frank Cantwell's Puma and Bruce Goldwater's Cougar. Also in New Zealand during this period, Ferris de Joux was constructing a variety of sports racers. De Joux is noted in particular for his Mini GT from the 1960s.
Ross Baker's Heron Cars started in 1962 making racing cars and eventually began producing kit cars in 1980. Bill Ashton, formerly of Microplas and Weltex, joined with Ted George in the 1960s and made the Tiki. Three were known to have been made. Graham McRae with Steve Bond of Gemini Plastics imported a replica Le Mans McLaren M6B styled GT mould in 1968, The cars were made and sold by Dave Harrod and Steve Bond of Fibreglass Developments Ltd, Bunnythorpe as the Maram. McRae went on to make a very good Porsche Spyder replica in the 1990s.
A number of new companies entered the market in the 1980s - Almac 1985, Alternative Cars (1984), Cheetah (1986), Chevron (1984), Countess Mouldings (1988), Fraser (1988), Leitch (1986), and Saker (1989). Some recent ones are Beattie (automobile) (1997), which became Redline in 2001, and McGregor (2001).
Two companies which specialise in making replicas of various models to order are Classic Car Developments (1992) and Tempero. Both of these companies were noted for the quality of their workmanship. Commencing in 2002, Coventry Classics Limited from Gore specialised in making replica Jaguar C-Types.
New vehicles registered and used imports registered
- (calendar years ended 31 December)
- Driving licence in New Zealand
- Kit and replica cars of New Zealand
- Licence plate lookup systems of New Zealand
- List of automobile museums
- List of motorcycle manufacturers
- Ministry of Transport (New Zealand)
- Motor Sport in New Zealand
- New Zealand Road Code
- NZ Transport Agency
- Transport in New Zealand
- Vehicle registration plates of New Zealand
- Persons per car in New Zealand
- 1958 4.8
- 1959 4.8
- 1960 4.7
- 1961 4.6
- 1962 4.5
- 1963 4.3
- 1964 4.1
- 1965 3.8
- 1966 3.7
- 1967 3.5
- 1968 3.4
- 1969 3.3
- 1970 3.3
- 1971 3.0
- 1972 3.0
- 1973 2.9
- 1974 2.8
- 1975 2.7
- 1976 2.7
- 1977 2.6
- The request was for duties to be imposed as follows:
- drays £10
- single buggies £15
- double buggies £20
- station waggons £20
- business waggons £20
- landaus £75
- broughams £75
- wagonettes £30
- hansoms £50
- tramcar bodies £150
- sulkies and roadsters £10
- gigs and hooded buggies £20
- phaetons £20
- dogcarts £20
- victorias £50
- motor car bodies 50 per cent ad valorem
- Countries of Origin
First registrations during 1917
- Britain —— - 415 — 6.2%
- USA — — -4,122 — 61.7%
- Canada — 1,976 — 29.6%
- France — — 104 — 1.6%
- Italy — — —- 14 — 0.2%
- Other — — —48 — 0.7%
- Total 6,679
- Auckland and Poverty Bay 1,875
- Hawkes Bay 626
- Taranaki 482
- Wellington including
- Rangitikei, Wairarapa 1,505
- Nelson Marlborough 242
- Canterbury 1,037
- Westland 52
- Otago and Southland 860
- Total 6,679
- General Motors Ford and Chrysler ran wholly owned plants in Windsor, Ontario a short distance from Detroit manufacturing cars largely of Canadian components, often bearing special Canadian brand names, and built them with right-hand-drive for sale in Britain, India, Australia, New Zealand and South and East Africa.
- Cars sold January to September 1927
- 1651 Ford
- 1100 Chevrolet
- 898 Essex (Hudson)
- 486 Dodge
- 471 Chrysler
- 379 Buick
- 359 Overland Whippet
- 297 Rugby
- 252 Studebaker
- 206 Hudson P-
- 165 Oldsmobile
- 157 Nash
- 132 Willys-Knight
- 108 Hupmobile
- 105 Oakland
- 92 Pontiac
- 62 Erskine
- 47 Paige
- 27 Cadillac P +
- 22 Packard P +
- 19 Chandler
- 9 Reo
- 8 Velie
- 8 Flint
- 7066 North American 80 per cent
- 182 Fiat
- 6 Ansaldo
- 37 Citroen
- 257 "Other"
- 482 European and other 5 per cent
- 449 Morris
- 387 Austin
- 78 Clyno
- 77 Singer
- 67 Standard
- 63 Crossley P +
- 55 Rover P -
- 40 Armstrong-Siddeley P +
- 33 Humber P +
- 19 Sunbeam P +
- 17 Bean
- 13 Talbot P +
- 10 Hillman
- 9 Vauxhall
- 9 Wolseley
- 8 Swift
- 5 Star
- 1 Arrol Johnson P +
- 1340 United Kingdom 15 per cent
- Year ——— total———Canada———USA——Britain——Europe
- 1925 —— 22,326 ——— 9,935 —— 8,502 —— 3,442 —— 447
- 1926 —— 15,776 ——— 3,528 —— 9,659 —— 2,176 —— 413
- 1927 —— 10,871 ——— 2,336 —— 6,122 —— 2,128 —— 285
- 1928 —— 16,504 ——— 4,783 —— 9,227 —— 2,364 —— 130
- 1929 —— 23,361 ——- 10,740 —— 8,529 —— 4,064 —— 28
- 1930 —— 14,314 ——— 8,025 —— 3,047 —— 3,231 —— 11
- 1931 ——- 3,388 ———— 482 ——— 475 —— 2,414 —— 17
- 1932 ——- 3,044 ———— 358 ——— 146 —— 2,537 ——— 3
- 1933 ——- 2,933 ———— 470 ——— 190 —— 2,272 ——— 1
- 1934 —— 11,747 ——— 2,315 —— 3,778 —— 5,654——— 0
- 1935 —— 17,824 ——— 2,619 —— 5,559 —— 9,646——— 0
- 1936 —— 24,229 ——— 4,572 —— 6,335 —— 13,321 ——— 1
- 1937 —— 30,331 ——— 7,398 —— 4,851 —— 18,079 ——— 2
- 1938 —— 28,380 ——— 7,735 —— 2,718 —— 17,630 —— 297
- 1939 —— 25,096 ——— 9,677 —— 1,501 —— 13,918 ——— 0
- 1940 ——- 5,038 ————- 31 ——— 179 ——- 4,828 ——— 0
- A report in The Times of January 1936 said that Rootes Group had just made the first shipments to Australia of British-built completely knocked down motorcars. The same report adds Rootes have been sending CKD vehicles to New Zealand "for some time". The Times, Friday, Jan 03, 1936; pg. 9; Issue 47262
- David Crozier Limited, Christchurch
- D Clive Crozier, Christchurch
- P H Vickery, Invercargill
- John Black, Dunedin
- Boon Investment company, Christchurch (coachbuilders)
- No-remittance sales January to April 1964
- 959 = 34 per cent — Holden*
- 243 = 9 per cent — Morris 1100
- 198 = 7.3 per cent — Ford Cortina
- 170 = 6.3 per cent — Austin 1100
- 167 = 6.3 per cent — Vauxhall Victor
- 146 = 5.4 per cent — Vauxhall Viva
- 120 = 4.4 per cent — MG
- 104 = 3.8 per cent — Chrysler Valiant*
- 87 = 3.2 per cent — Ford Zephyr 6
- 82 = 3.0 per cent — Vauxhall Velox
- 50 = 1.9 per cent — Morris Mini
- 50 = 1.9 per cent — Austin Mini
- 49 = 1.8 per cent — Ford Anglia
- 49 = 1.8 per cent — Ford Falcon*
- 248 = 9.3 per cent others
- No remittance imports
- year quantity
- 1955 1,998
- 1956 2,321
- 1957 1,427
- 1958 2,409
- 1959 2,527
- 1960 3,981
- 1961 7,727
- 1962 6,584
- 1963 11,426
- 1964 12,606
- 1965 14,121
- 1966 14,426
- 1967 14,928
- 1968 10,286
- 1969 9,035
- They had the same shareholders holding the same share of the capital of each company
- 28 per cent —Wellington—Magnus Motors
- 6 per cent —Dunedin—Austin Motors (Otago)
- 14 per cent —Christchurch—David Crozier
- 6 per cent —Invercargill—P. H. Vickery
- 8 per cent —Hawera —Farmers' Co-op. Org. Soc.
- 6 per cent —Napier— Aorangi
- 32 per cent —Auckland —Seabrook, Fowlds
- Objects: Manufacturers, dealers, repairers, etc., of motor-cars, motor vehicles, aeroplanes, and incidental.
- itself an alliance of Wellington heavy engineers; William Cable; Thames founders, heavy engineers and locomotive and shipbuilders A & G Price and Wellington tunnellers and civil engineers Downer & Co
- which had inherited dealerships throughout the country from its stock and station agency operations
- G.M. 23 per cent
- Ford 22
- Todd 16
- Austin 11
- Dominion Motors 11 per cent
- Motor Industries 7
- NZ Motor Bodies 1
- Standard Triumph
- Campbell Motors
- Steel Brothers
- Vehicle Assemblers of New Zealand a joint Ford and Mazda operation
- "Motor-Cars in Wellington". Evening Post. LV (64). 17 March 1898. p. 5. Retrieved 9 February 2012.
- Two motor cars arrived at Wellington . . . Poverty Bay Herald, Volume XXV, Issue 8146, 23 February 1898, Page 2
- New Zealand in Review: an illustrated digest of interesting information, historical, geographical and otherwise, relating to New Zealand, James Berry, page 59
- Dominion's motor fleet, Auckland Star, Volume LVIII, Issue 158, 7 July 1927, Page 2
- Local and General, Star (Canterbury), Issue 6596, 21 September 1899, Page 3
- Subritzky photograph, Jaguar and Daimler Heritage Trust
- First Car Brought to Dominion, New Zealand Herald, Volume LXXII, Issue 22303, 28 December 1935, Page 9
- Editorial, Mataura Ensign, Issue 635, 14 September 1899, Page 2
- Accidents and fatalities, Star (Canterbury), Issue 6650, 23 November 1899, Page 3
- Carterton's first motor car, Manawatu Standard 19 January 1901, Page 4
- New Zealand Official Year Book 1904, page 175
- Motor vehicle imports, Evening Post, Volume CXI, Issue 79, 3 April 1926, Page 19
- John McCrystal, 100 years of motoring in New Zealand, Hodder Moa Beckett Publishers Limited, 2003, ISBN 1-86958-897-5
- The New Zealand Motor and Cycle Journal, 25 April 1912, page 73
- Latest Telegrams, Timaru Herald, Volume VI, Issue 196, 17 April 1867, Page 2
- Editorial, Otago Daily Times, Issue 2743, 21 November 1870, Page 2
- Thomson Road Steamer, Press, Volume XVIII, Issue 2444, 28 February 1871, Page 3
- Wings over Waiotahi, Radcliffe, Avon Press, 1997, page 55-57, ISBN 0-473-05000-5
- Untitled, Colonist, Nelson, New Zealand, Volume XLI, Issue 9161, 3 May 1898, Page 2
- The Motor Car Question, Evening Post, Volume LVI, Issue 14, 16 July 1898, Page 2
- Local and general, Star , Issue 6789, 8 May 1900, Page 3
- First New Zealand Built Motor Car, Otago Witness, Issue 2417, 12 July 1900, Page 48
- Rona Adshead and Rex Murry, Replicar, Square One Press, Dunedin, 2002, ISBN 0-908562-53-5
- The Veteran Years of Motoring in New Zealand, Pam MacLean and Brian Joyce, AH & AW Reed, 1971, ISBN 0-589-00691-6
- New Zealand Official Yearbook
- Modern Motoring. Auckland Star, Volume LVI, Issue 64, 17 March 1925, Page 11
- W D Rose, Development options in the New Zealand motor car assembly industry, Research paper 16, NZIER, 1971
- Local and general, Evening Post, Volume LV, Issue 121, 24 May 1898, Page 4
- Tariff Revision, the coach building trade, Evening Post, Volume LXXI, Issue 81, 5 April 1906, Page 5
- From Detroit to Canada. Poverty Bay Herald, Volume XLIII, Issue 13983, 4 May 1916, Page 5
- The Dominion's Motors. Oamaru Mail, Volume XLV, Issue 13452, 14 May 1918, Page 1
- Motor pioneers in the roadless backblocks. Evening Post, Volume LXXXIV, Issue 138, 7 December 1912, Page 12
- "New Car Sales.". New Zealand Herald. 1927-11-12. p. 10. Retrieved 2016-03-26.
- Industrial Development, Motor vehicles. New Zealand Official Yearbook 1989 Information Services Division of the Department of Statistics
- Cheating the Customs. NZ Truth Issue 352, 23 March 1912, Page 4
- Car assembly, Evening Post, Volume CXI, Issue 24, 29 January 1926, Page 8
- Car assembly, body-builders' request, a reply to statements. Evening Post, Volume CXI, Issue 26, 1 February 1926, Page 4
- Success of the Ford. Dominion, Volume 5, Issue 1246, 30 September 1911, Page 8
- A nine-storey warehouse. Evening Post, Volume XCVIII, Issue 89, 13 October 1919, Page 8
- Car assembly. Evening Post, Volume CXI, Issue 19, 23 January 1926, Page 6
- New motor industry. New Zealand Herald, Volume LXIII, Issue 19231, 21 January 1926, Page 11
- General Motors Otago Daily Times, Issue 20202, 13 September 1927, Page 8
- New Zealand and the motor car industry. Otago Daily Times, Issue 20866, 5 November 1929, Page 3
- Motor works.Auckland Star, Volume LXX, Issue 55, 7 March 1939, Page 16
- Mark Webster, page 193 Assembly, New Zealand Car Production 1921–1998 Reed 2002 ISBN 0 7900 0846 7
- New motor works. Evening Post, Volume CXII, Issue 25, 29 July 1931, Page 11
- Rover Co. Press, Volume LXVIII, Issue 20480, 25 February 1932, Page 10
- Rover. Evening Post , Issue 2, 2 July 1932, Page 7
- Properties for sale. Evening Post, Volume CXVI, Issue 34, 9 August 1933, Page 3
- BIG CONTRACT LET Press, Volume LXVIII, Issue 20636, 27 August 1932, Page 16
- former Rover assembly plant
- Assembling cars, adjustment of duty utilising labour. ‘’Evening Post’’, Volume CXVIII, Issue 45, 22 August 1934, Page 3
- Motoring. Press, Volume LXX, Issue 21257, 31 August 1934, Page 17
- Motor vehicles.Evening Post, Volume CXX, Issue 22, 25 July 1935, Page 17
- The motor trade, New Zealand Herald, Volume LXXV, Issue 23215, 8 December 1938, Page 17
- Controlled Imports. Press, Volume LXXIV, Issue 22579, 8 December 1938, Page 10
- Office besieged, The Farmers' Fate. New Zealand Herald, Volume LXXV, Issue 23216, 9 December 1938, Page 13
- Jane Kelsey, Reclaiming the Future: New Zealand and the Global Economy Bridget Williams Books, 1999
- Import licensing in New Zealand Bulletin. Reserve Bank of New Zealand March 1981
- Richard Willis, Ten years of change in New Zealand manufacturing employment Archived January 27, 2015, at the Wayback Machine., Victoria University of Wellington, Labour Employment and Work in New Zealand, 1994 accessed 22 April 2016
- Ford Corporate History accessed 22 April 2016
- A very long Relationship accessed 22 April 2016
- Greater Manukau accessed 22 April 2016
- Building a Car Community Nelson Mail 14 March 2009 accessed 22 April 2016
- 75 Years of Toyota accessed 22 April 2016
- New assembling plant Auckland Star, Volume LX, Issue 124, 28 May 1929, Page 19
- City property deal. Auckland Star, Volume LXIII, Issue 219, 15 September 1932, Page 9
- Neil Penman, The University on the Hill, The History of Todd Park, Penmanship Press 2005 ISBN 0473101734
- Car assembly in New Zealand. Auckland Star, Volume LXVI, Issue 277, 22 November 1935, Page 7
- Amuri Motors
- Car assembly factory. Press, Volume LXXI, Issue 21449, 15 April 1935, Page 5
- New companies, southern registrations, private New Zealand Herald, Volume LXXII, Issue 22138, 18 June 1935, Page 5
- A new Christchurch industry, Motor Assemblies (South Island) Limited Press’, Volume LXXI, Issue 21626, 9 November 1935, Page 1
- Todd Motors, Petone. Auckland Star, Issue 111, 13 May 1935, Page 9
- Assembling Dodge cars. Press, Volume LXXII, Issue 21961, 9 December 1936, Page 18
- Erection of new factory.Press, Volume LXXV, Issue 22771, 25 July 1939, Page 7
- Motor Assemblies Nelson Photo News, No 57 : July 24, 1965
- Cotton Mill Disgrace Salient, Victoria University student's paper. Vol. 25, No. 4. 1962.
- New Factory. Auckland Star, Volume LXVII, Issue 154, 1 July 1936, Page 10
- [a=d&d=AS19351214.2.86&cl=search&srpos=24&e=-------100--1-byDA---2%22car+assembly%22-ARTICLE-&st=1 Car assembly depot.] Auckland Star, Volume LXVI, Issue 296, 14 December 1935, Page 10
- Down the Line. Auckland Star, Volume LXVIII, Issue 260, 2 November 1937, Page 18
- Motor assembly factory. Press, Volume LXXV, Issue 22659, 14 March 1939, Page 10
- Companies registered Press, Volume LXXV, Issue 22727, 3 June 1939, Page 12
- Many new features Auckland Star, Volume LXX, Issue 84, 11 April 1939, Page 16
- A Powerful Company ’’Press’’, Volume LV, Issue 16515, 10 June 1919, Page 7
- Big Merger in the Motor Business. ‘’Press’’, Volume LV, Issue 16546, 11 June 1919, Page 8
- New Companies. ‘’Evening Post’’, Volume XCVII, Issue 137, 12 June 1919, Page 4
- Motor Trade items. New Zealand Herald, Volume LXIII, Issue 19298, 10 April 1926, Page 12
- Watching a car assembly. Auckland Star, Volume LIX, Issue 215, 11 September 1928, Page 19
- Morris Motors. New Zealand Herald, Volume LXVII, Issue 20755, 24 December 1930, Page 20
- Gash retires. Auckland Star, Volume LIX, Issue 233, 2 October 1928, Page 17
- Morris Minor. New Zealand Herald, Volume LXVIII, Issue 20832, 26 March 1931, Page 18
- Large Factory. New Zealand Herald, Volume LXXV, Issue 23143, 15 September 1938, Page 12
- Assembly Plant In Newmarket. New Zealand Herald, Volume LXXVI, Issue 23281, 25 February 1939, Page 12
- Morris Cars. Ellesmere Guardian, Volume LX, Issue 79, 6 October 1939, Page 2
- Ray Newell. Morris Minor: 60 Years on the Road pages 38 and 118, Dorchester, Veloce 2007. ISBN 9781845841577 accessed 28 April 2016
- Around the World: New Zealand
- Machinery Lloyd issues 14-20 Volume 32
- J V T Baker, War Economy The Official History of New Zealand in the Second World War 1939–1945
- Archives New Zealand video of the operations inside GM Ford And Todd plants
- Nancy M Taylor. The Shoe Pinches, The Home Front Volume II The Official History of New Zealand in the Second World War 1939–1945
- a 1953 advertisement for locally assembled cars
- Reserve Bank Bulletin March 1981, page 77
- Company Registrations. ‘’Evening Post’’, Volume CXL, Issue 39, 15 August 1945, Page 8
- Patrick Harlow, New Zealand Manufactured Cars, Wilsonscott, Christchurch 2013 ISBN 9781877427510
- A McEwan, ‘’Developing Economies’’ Heritage Consultancy Services report to Thames-Coromandel District Council 2010
- Steelbro history accessed 1 May 2016
- "1967 Hino Contessa 1300 – Rear Guard Assault". NZ Classic Car. Parkside Media. 2007-10-11. Retrieved 2012-05-27.
- Component Industries, Encyclopedia of New Zealand accessed 7 October 2016
- Hugh T Patrick and Larry Meisner, Pacific Basin Industries in Distress. New York, Columbia University Press, 1990
- Steelbro innovations keep it in front of competition, The Press, Christchurch, 14 September 2007, Fairfax Media
- Anderson, Donn, ed. (April 1993). "Newsline: New Charade in Japan". New Zealand Car. Auckland, New Zealand: Accent Publishing Cnr. 7 (6): 16. ISSN 0113-0196.
- Why the Duzgo went, 4WD news, 8 Sept 2010
- Beaded Wheels Magazine, 1 February 2013
- Duzgo 1974 to 1980, Patrick Halow, Constructors Car Club magazine, Volume 25 Issue 2, March 2012, pages 24-27
- Hulme Supercars finalises the Hulme F1, Press release 1 October 2011
- Zetini Haast - Production specifications, Press Release, 1 July 2014
- Masterton manufacturer creating KiwiGoa tuktuks for tourist and taxi market, Piers Fuller, updated 11:14, 11 May 2016, retrieved
- EV2 – Electric Car Research Program Archived May 12, 2016, at the Wayback Machine., retrieved 28 April 2016
- CAN control system for an electric vehicle, Thesis by Abdel Azzeh, University of Canterbury, 2006
- NZ project puts parking problems in the past, Matt Campbell, Last updated 10:29 09/08/2013 - retrieved 16 November 2015
- Top Secret Kiwi car goes into production, Hamish McNielly, Last updated 11:21, November 15, 2015 - retrieved 16 November 2015
- Historic Racing Cars of New Zealand, Graham Vercoe, Reed Books, Auckland 1991, ISBN 0-7900-0189-6
- Southland made Jaguars headed to England, The Southland Times, 13 February 2015
- Registration data 1975 onwards, Motor Industry Association, accessed 5 April 2016