Aluminium bromide

Aluminium bromide
Preferred IUPAC name
Aluminium bromide
Other names
Aluminic bromide

Aluminium(III) bromide

Aluminium tribromide
7727-15-3 YesY
7784-11-4 hexahydrate YesY
3D model (Jmol) Interactive image
ChemSpider 22818 YesY
9040513 hemi(acetyl bromide) YesY
9499890 ethanethiol YesY
ECHA InfoCard 100.028.891
EC Number 231-779-7
PubChem 24409
11062022 tertikis(tetrachloromethane)
10865226 hemi(acetyl bromide)
11324936 ethanethiol
6093832 tris(pyridine)
RTECS number BD0350000
UN number 1725
Molar mass 266.69 g/mol
Appearance white to pale yellow
crystalline solid
Odor pungent
Density 3.205 g/cm3
Melting point 97.8 °C (208.0 °F; 370.9 K)
Boiling point 265 °C (509 °F; 538 K)
Solubility slightly soluble in methanol, diethyl ether, acetone
not listed
NFPA 704
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g., canola oil Health code 3: Short exposure could cause serious temporary or residual injury. E.g., chlorine gas Reactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g., calcium Special hazards (white): no codeNFPA 704 four-colored diamond
Lethal dose or concentration (LD, LC):
1598 mg/kg (oral, rat)
Related compounds
Other anions
aluminium trichloride
aluminium triiodide
Other cations
boron tribromide
Related compounds
iron(III) bromide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Aluminium bromide is any chemical compound with the empirical formula AlBrx. The species called "aluminium tribromide," is the most common aluminium bromide.[1] It is a colorless, sublimable hygroscopic solid, although older samples tend to be hydrated.


The dimeric form of aluminium tribromide (Al2Br6) predominates in the solid state, solutions in noncoordinating solvents (e.g. CS2), in the melt, and the gas phase. Only at high temperatures do these dimers break up into monomers:

Al2Br6 → 2 AlBr3 ΔH°diss = 59 kJ/mol

The species aluminium monobromide forms from the reaction of HBr with Al metal at high temperature. It disproportionates near room temperature:

6/n "[AlBr]n" → Al2Br6 + 4 Al

This reaction is reversed at temperatures higher than 1000 °C. Aluminium monobromide has been crystallographically characterized in the form the tetrameric adduct Al4Br4(NEt3)4 (Et = C2H5). This species is electronically related to cyclobutane. Theory suggest that the diatomic aluminium monobromide condenses to a dimer and then a tetrahedral cluster Al4Br4, akin to the analogous boron compound.[2]

Al2Br6 consists of two AlBr4 tetrahedra that share a common edge. The molecular symmetry is D2h.

The monomer AlBr3, observed only in the vapor, can be described as trigonal planar, D3h point group. The atomic hybridization of aluminium is often described as sp2. The Br-Al-Br bond angles are 120 °.


Experiment showing synthesis of aluminum bromide from the elements.

By far the most common form of aluminium bromide is Al2Br6. This species exists as hygroscopic colorless solid at standard conditions. Typical impure samples are yellowish or even red-brown due to the presence of iron-containing impurities. It is prepared by the reaction of HBr with Al:

2 Al + 6 HBr → Al2Br6 + 3 H2

Alternatively, the direct bromination occurs also:

2 Al + 3 Br2 → Al2Br6


A demonstration of the reaction of the exothermic reaction of the strong Lewis acid (Al2Br6) and strong Lewis base (H2O).

Al2Br6 dissociates readily to give the strong Lewis acid, AlBr3. Regarding the tendency of Al2Br6 to dimerize, it is common for heavier main group halides to exist as aggregates larger than implied by their empirical formulae. Lighter main group halides such as boron tribromide do not show this tendency, in part due to the smaller size of the central atom.

Consistent with its Lewis acidic character, water hydrolizes Al2Br6 with evolution of HBr and formation of Al-OH-Br species. Similarly, it also reacts quickly with alcohols and carboxylic acids, although less vigorously than with water. With simple Lewis bases (L), Al2Br6 forms adducts, such as AlBr3L.

Aluminium tribromide reacts with carbon tetrachloride at 100 °C to form carbon tetrabromide:

4 AlBr3 + 3 CCl4 → 4 AlCl3 + 3 CBr4

and with phosgene yields carbonyl bromide and aluminium chlorobromide:

AlBr3 + COCl2 → COBr2 + AlCl2Br

Al2Br6 is used as a catalyst for the Friedel-Crafts alkylation reaction.[1] Related Lewis acid-promoted reactions include as epoxide ring openings and decomplexation of dienes from iron carbonyls. It is a stronger Lewis acid than the more common Al2Cl6.


Aluminium tribromide is a highly reactive material.[3]


  1. 1 2 "Encyclopedia of Reagents for Organic Synthesis". 2001. doi:10.1002/047084289X. ISBN 0471936235.
  2. Dohmeier, Carsten; Loos, Dagmar; Schnöckel, Hansgeorg (1996). "Aluminum(I) and Gallium(I) Compounds: Syntheses, Structures, and Reactions". Angewandte Chemie International Edition in English. 35 (2): 129. doi:10.1002/anie.199601291.
  3. Renfew, Malcom M. (1991). "Hazardous laboratory chemicals: Disposal guide (Armour, M.A.)". Journal of Chemical Education. 68 (9): A232. doi:10.1021/ed068pA232.2.
This article is issued from Wikipedia - version of the 10/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.