AN/CRN-2

The radio set AN/CRN-2 was an air transportable glide path transmitter used by the Army Air Force during and after World War II, the set was standardized on 5 February 1944. and was an upgrade of SCR-592.

Use

Signals from the transmitter are received by the pilot of the aircraft, over the AN/ARN-5 receiving equipment. which provides visual indication of the proper course of descent in the vertical plane during instrument landing operation. At an altitude of 3,000 feet it provides a straight-line glide path course with good definition from a minimum distance of 15 miles from the point of landing contact with the ground. The angle indicated between the horizontal and the glide path is readily adjustable between 2 and 5 degrees.

The emission patterns of the localizer and glideslope signals. Note that the glideslope beams are partly formed by the reflection of the glideslope aerial in the ground plane.

Statistics

The equipment operates in the frequency range of 329 to 335 Mc. power output is 25 Watts of CW power. the signal is a straight line glide path-double beam MCW Modulated continuous wave system. the range is 15 miles at 3,000 feet.

Components

The transmitting components were mounted on an air transportable trailer (the V-1), power is provided by a PE-120 Generator (115 volts) and PP-29 Rectifier. Total weight is 1800 Lbs.

Aircraft component

The AN/ARN-5 consists of antenna system

See also

References

    External links

    This article is issued from Wikipedia - version of the 10/17/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.