Methylene diphenyl diisocyanate

4,4'-Methylene diphenyl diisocyanate
Names
Preferred IUPAC name
1,1'-Methylenebis(4-isocyanatobenzene)
Other names
Bis(4-isocyanatophenyl)methane
1-Isocyanato-4-[(4-isocyanatophenyl)methyl]benzene
4,4'-Methylene diphenyl diisocyanate
4,4'-Diphenylmethane diisocyanate
Bayer Desmodur 44
Methylene bis(4-phenyl isocyanate)
Pure MDI
Identifiers
101-68-8 YesY
3D model (Jmol) Interactive image
Interactive image
ChEBI CHEBI:53218 N
ChemSpider 7289 YesY
ECHA InfoCard 100.002.697
PubChem 7570
RTECS number NQ9350000
UNII B0LO6BBS8C N
Properties
C15H10N2O2
Molar mass 250.25 g/mol
Appearance white or pale yellow solid
Density 1.230 g/cm3, solid
Melting point 40 °C (104 °F; 313 K)
Boiling point 314 °C (597 °F; 587 K)
Reacts
Vapor pressure 0.000005 mmHg (20°C)[1]
Hazards
Harmful (Xn)
R-phrases R20, R36/37/38, R42/43
S-phrases (S1/2), S23, S36/37, S45
Flash point 212–214 °C (Cleveland open cup)
Lethal dose or concentration (LD, LC):
2200 mg/kg (mouse, oral)[2]
31,690 mg/kg (rat, oral)[2]
369 mg/m3 (rat, 4 hr)
380 mg/m3 (rat, 4 hr)
178 mg/m3 (rat)[2]
US health exposure limits (NIOSH):
PEL (Permissible)
 C 0.2 mg/m3 (0.02 ppm)[1]
REL (Recommended)
 TWA 0.05 mg/m3 (0.005 ppm) C 0.2 mg/m3 (0.020 ppm) [10-minute][1]
IDLH (Immediate danger)
 75 mg/m3[1]
Related compounds
Related Isocyanates
 Toluene diisocyanate
Naphthalene diisocyanate
Hexamethylene diisocyanate
Isophorone diisocyanate
Related compounds
 Polyurethane
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Methylene diphenyl diisocyanate, most often abbreviated as MDI, is an aromatic diisocyanate. Three isomers are common, varying by the positions of the isocyanate groups around the rings: 2,2'-MDI, 2,4'-MDI, and 4,4'-MDI. The 4,4' isomer is most widely used. This isomer is also known as Pure MDI. MDI reacts with polyols in the manufacture of polyurethane. It is the most produced diisocyanate, accounting for 61.3% of the global market in the year 2000.[3]

Production

Total world production of MDI and polymeric MDI is over 5 million tonnes per year (Mt/a in 2011). The largest producer is Covestro (ex Bayer MaterialScience) followed closely by Yantai Wanhua.[4] Other major producers are BASF, BorsodChem, Dow, Huntsman, Nippon Polyurethane Industry, OCI. All major producers of MDI are members of the International Isocyanate Institute, whose aim is the promotion of the safe handling of MDI and TDI in the workplace, community and environment.

The first step of the production of MDI is the reaction of aniline and formaldehyde, using hydrochloric acid as a catalyst to produce a diamine precursor under the chemical formulation:

2 C6H5NH2 + CH2O → CH2(C6H4NH2)2 + H2O

Then, these diamines are treated with phosgene to form an MDI. The isomer ratio is determined by the isomeric composition of the diamine. Distillation of the MDI mixture gives polymeric MDI (a mixture of oligomeric polyisocyanates) and an MDI isomer mixture which has a low 2,4' isomer content. Further purification entails fractionation of the MDI isomer mixture.[5]

Reactivity of the isocyanate group

The positions of the isocyanate groups influences their reactivity. In 4,4'-MDI, the two isocyanate groups are equivalent but in 2,4'-MDI the two groups display highly differing reactivities. The group at the 4-position is approximately four times more reactive than the group at the 2-position due to steric hindrance.[3]

Applications

The major application of 4,4'-MDI is the production of rigid polyurethane. Typically, one tonne of polyurethane foam needs 0.616 tonne of MDI and 0.386 tonne of polyol, with 0.054 tonne pentane as a blowing agent.[6] These rigid polyurethane foams are good thermal insulators and used in nearly all freezers and refrigerators worldwide, as well as buildings. Typical polyols used are polyethylene adipate (a polyester) and poly(tetramethylene ether) glycol (a polyether).

4,4'-MDI is also used as an industrial strength adhesive, which is available to end consumers as various high-strength bottled glue preparations.[7]

Safety

MDI is the least hazardous of the commonly available isocyanates but is not benign.[8] Its very low vapour pressure reduces its hazards during handling compared to the other major isocyanates (TDI, HDI). However, it, like the other isocyanates, is an allergen and sensitizer. Persons developing sensitivity to isocyanates may have dangerous systemic reactions to extremely small exposures, including respiratory failure. Handling MDI requires strict engineering controls and personal protective equipment.[9] Compared to other organic cyanates, MDI has a relatively low human toxicity. It is a potentially violently reactive material towards water and other nucleophiles.

References

  1. 1 2 3 4 "NIOSH Pocket Guide to Chemical Hazards #0413". National Institute for Occupational Safety and Health (NIOSH).
  2. 1 2 3 "Methylene bisphenyl isocyanate". Immediately Dangerous to Life and Health. National Institute for Occupational Safety and Health (NIOSH).
  3. 1 2 Randall, D.; Lee, S. (2003). The Polyurethanes Book. New York: Wiley. ISBN 978-0-470-85041-1.
  4. ↑ Gal, J. (2012-02-20). "To the Rescue". ICIS Chemical Business.
  5. ↑ Six, C.; Richter, F. (2005), "Isocyanates, Organic", Ullmann's Encyclopedia of Industrial Chemistry, Weinheim: Wiley-VCH, doi:10.1002/14356007.a14_611
  6. ↑ Boustead, I. (2005). "Polyurethane rigid foam" (PDF). Eco-Profiles of the European Plastics Industry. Brussels: PlasticsEurope.
  7. ↑ US patent 6884904, Smith, A. K.; Goddard, R. J.; Paulsen, E. J. L., "MDI-based polyurethane prepolymer with low monomeric MDI content", issued 2005-04-26
  8. ↑ Allport, D. C.; Gilbert, D. S.; Outterside, S. M., eds. (2003). MDI and TDI: Safety, Health and the Environment: A Source Book and Practical Guide. Wiley. ISBN 978-0-471-95812-3.
  9. ↑ Almaguer, D.; et al. (September 2006). "Preventing Asthma and Death from MDI Exposure During Spray-on Truck Bed Liner and Related Applications" (PDF). NIOSH Alert. The National Institute for Occupational Safety and Health. DHHS (NIOSH) Publication No. 2006–149. Retrieved 2012-08-14.
This article is issued from Wikipedia - version of the 11/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.